Introduction
In Europe, starter play a pivotal role in the culinary landscape, especially in the production of dry-cured meats and cheeses. Southern European countries like Italy, Spain, and Southern France are renowned for their extensive use of molds in meat processing, showcasing a tradition that highlights the region’s gastronomic heritage (Spotti et al., 2008). These countries employed the unique properties of molds to enhance the flavor, texture, and preservation of their traditional meat and cheese products, exemplifying the widespread appreciation and application of mold fermentation in enhancing food quality and safety (El-banna et al., 1987; Geisen et al., 1992). For meat fermentation, employing specific mold strains, such as Penicillium nalgiovense for salami and salchichon not only imparts distinctive tastes and aromas but also inhibits the growth of harmful bacteria, ensuring the meat is safe for consumption (Bernáldez et al., 2013; Magistà et al., 2016).
Starters, including bacteria (notably lactic acid bacteria and coagulase-negative staphylococci), yeasts, and molds, are crucial for fermenting meat products, enhancing safety through rapid acidification and antimicrobial substance production. These starters not only help standardize product properties and reduce ripening times but also mitigate microbiological risks from foodborne pathogens (Salmonella spp., Listeria spp., etc) and chemical hazards like biogenic amines, nitrosamines, polycyclic aromatic hydrocarbons, and mycotoxins. Specifically, the lactic acid bacteria reflect their extensive involvement in metabolic activities during fermentation (Radulović et al., 2011). They create an acidic environment by lowering the pH to 4.6–5.9, thereby influencing meat color, and texture, and fostering both fermentation and drying.
The careful selection of non-toxigenic mold strains is essential, as it guarantees the health benefits of fermented meats without compromising safety. Thus, mold fermentation stands as a pivotal practice in the food industry, marrying tradition with modern safety and quality standards (Laranjo et al., 2019). Strains, such as P. nalgiovense and Penicillium chrysogenum, are used to protect dried fermented sausages in the meat processing industry (Bernáldez et al., 2013). Fungal starters have antioxidant effects, prevent spoilage-induced discoloration, enhance texture, generate unique flavors through fat and protein degradation, and influence the appearance of sausages (Philipp and Pedersen, 1988). Moreover, fungal starters are protective against pathogenic and spoilage microorganisms (Geisen et al., 1992; Leistner, 1994; López-Díaz et al., 2001; Singh and Dincho, 1994).
Recently the domestic market for fermented meat products, including fermented sausages, increased in South Korea. Consequently, the demand for fungal starters continues to increase. P. nalgiovense is the only domestically approved fungal starter strain. Importation of foreign strains is necessary for the utilization of starter products in fermented meat products. However, research on fermented sausages has predominantly focused on investigating the impact of additives on sensory quality, sodium alternatives, and storage function (Yim et al., 2020a; Yim et al., 2020b; Yoon et al., 2018). Consequently, the capability and benefits of starter strains derived from local sources remain significantly underexplored (Chung et al., 2017; RDA, 2018). In accordance with the Nagoya Protocol on Access to Generic Resources and the Fair and Equitable Sharing Arising from their Utilization to the Convention on Biological Diversity, the production of fermented foods using domestic bacteria is very important and essential for the fermented food industry. This study aimed to identify domestically derived starter strains suitable for fermented sausages to address the need for homegrown starter development to advance domestic fermented meat production.
Materials and Methods
Isolation and preparation of fungal strains
The fungal starter strains were isolated from traditional fermented foods in South Korea, including Nuruk and Jeotgal, and from mudflats located in Seondo-ri, Hwawangsan, Geumjeong, Soyulgok, Biin-myeon, Seocheon-gun, and Chungcheongnamdo. Isolates were inoculated on potato dextrose agar (PDA) and incubated at 25℃ for 7 days. A total of 72 separate strains were isolated. Two isolates from the mudflat were identified as P. nalgiovense and were designated SD01 and SJ02 (P. nalgiovense SD01 and P. nalgiovense SJ02). To prepare spore suspensions, spores were harvested and mixed with 10 mL of 0.1% (w/v) sterile peptone water. Mold600 (M600, Chr. Hansen, Hørsholm, Denmark) was used as the control. All strains were inoculated at a concentration of 8 Log colony-forming units (CFUs). Each strain was stored in 20% glycerol solution at –80℃ until required.
Identification of isolates
For strain identification, lactophenol cotton blue staining at the genus level, internal transcribed spacer (ITS) sequencing, and phylogenetic analysis confirmed P. nalgiovense species. The ITS sequences of the isolates were amplified by polymerase chain reaction (PCR) and analyzed at Macrogen (Seoul, Korea). PCR was performed as described previously (Frisvad et al., 2013). β-tubulin (BenA) and the ITS sequences were generated and combined with sequences used in Table 1. DNA was extracted using a ZR Fungal/Bacterial DNA MiniPrep kit (Zymo Research, Irvine, CA, USA) as previously described (OjoOkunola et al., 2020). PCR was performed using a total volume of 20 μL. The reaction mixture included 200 ng/μL of DNA solution, 10 μL of pre-mixture (AccuPower® Taq PCR Master Mix, Bioneer, Daejeon, Korea), 1 μL of each primer, and RNase-free water. PCR for β-tubulin involved an initial denaturation step at 94℃ for 5 min, followed by 40 cycles of denaturation at 94℃ for 45 s, annealing at 55℃ for 45 s, extension at 72℃ for 1 min, and a final extension cycle at 72℃ for 7 min. The PCR sequences were detected using BLAST in the GenBank database located at the National Center for Biotechnology Information and compared with ITS sequences of previously reported strains. Phylogenetic analysis was performed to determine the genetic relationship of SJ02 within the P. nalgiovense using MEGA software (version 4.0; http://www.megasoftware.net). The neighbor-joining method was used to construct a phylogenetic tree using the maximum composite likelihood model (Kimura, 1980; Saitou and Nei, 1987).
Table 1. PCR primers used in this study
PCR, polymerase chain reaction; ITS, internal transcribed spacer.
Polymerase chain reaction detection of mycotoxin genes
Positive control strains were procured from the Korean Collection for Type Cultures (KCTC, Jeongeup, Korea). They included Penicillium roquefortii Thom (KCTC 6080) and P. chrysogenum (KCTC 6933). Aflatoxin, Ochratoxin A, Patulin, Sterigmatocystin, Cyclopiazonic acid, Penicillin (pcbAB), Penicillin (penDE), Mycophenolic acid, Roqueforine C, and Penicillin (pcbC) β-tubulin were analyzed by PCR using the primers listed in Table 1 (Bernáldez et al., 2013; Färber and Geisen, 1994; López-Díaz et al., 2001; Moavro et al., 2019; Rodríguez et al., 2012). PCR for Aflatoxin (omt-1), Ochratoxin A (otanpsPN), Patulin (idh), Sterigmatocystin (fluG), Cyclopiazonic acid (dmaT), Penicillin (pcbAB), Penicillin (penDE), and Penicillin (pcbC) involved an initial denaturation step at 95℃ for 2 min, followed by 30 cycles of denaturation at 95℃ for 30 s, annealing at 60℃ for 1 min, extension at 72℃ for 1 min, and a final extension cycle at 72℃ for 5 min. For Mycophenolic acid (mpaC) and Roqueforine C (rds/roqA), PCR was performed as just described with annealing temperatures of 54℃ and 50℃, respectively. Fluorescence amplification was performed to verify the PCR products.
Crude cell free extract enzymatic activity assay
Extracellular proteolytic and lipolytic enzymes were prepared from the proteolytic broth (Proteo M), as previously described (Biaggio et al., 2016). Proteo M contained (per L) 6.392 g of KH2PO4, 0.522 g of K2HPO4, 0.2 g of MgSO4∙7H2O, 1 g of yeast extract, 5 g of NaCl, and 5 g of skim milk powder. In addition, extracellular lipolytic enzymes were prepared from the lipolytic broth (CHO lipo) as previously described. CHO lipo contained (per L) 6.0 g of KH2PO4, 1.0 g of MgSO4∙7H2O, 2.0 g of (NH4)2SO4, 4.0 g of peptone, and 10 mL of Tween 20. The medium was adjusted to pH 6.0 and autoclaved for 15 min at 121℃. Extracellular proteolytic and lipolytic enzyme production for each Penicillium species was performed in 50 mL of Proteo M or CHO lipo inoculated with 1 mL (106 spores/mL) of each Penicillium species. They were incubated at 25℃ for 14 days with shaking at 150 rpm. After incubation, each production broth was centrifuged at 11,200×g for 5 min. Each supernatant was filtered through a 0.22 μm syringe filter to obtain the crude cell free extract (CCFE), which was assayed. The enzymatic activity of CCFE was assessed on sodium-proteolytic (SP) and lipolytic-tween20 (LT20) plates. A central well was created in the agar plates using a 17 mm cork-borer. CCFE (500 μL) was added to each well. The plate assays were performed in triplicate. The plates were incubated at 25℃ overnight and observed for the presence of a clearance halo for proteolytic activity or a precipitation zone for lipolytic activity.
Proteolytic activity assay
The proteolytic activity was determined as previously described (Magistà et al., 2016). Media were prepared to measure extracellular protease activity, as shown in Table 2. To ascertain the best temperature for maximizing proteolytic activity and growth, the strain was inoculated on skim milk agar plates and maintained at 18℃ and 12℃ for 9 days. The strain suspension was inoculated at two spots with 5 μL of a suspension containing 104 spores/mL. The enzymatic activity indices for the proteolytic plate assays were determined following the previously described method (Hankin and Anagnostakis, 1975). The semiquantitative enzymatic index (EI) was calculated as EI=H/C, where H represents the diameter of the degradation halo and C is the diameter of the fungal colony. The halo zone around the colony was measured (mm) daily over a span of 9 days, using a ruler along two diametrically opposed directions (Lumi Abe et al., 2015).
Table 2. Recipes of the media used to determine enzymatic activity
SP, sodium-proteolytic; SPP, sodium-proteolytic-PDA; PDA, potato dextrose agar; LT20, lipolytic-tween20; LT80, lipolytic-tween80.
Lipolytic activity assay
The lipolytic activity was determined as previously described (Magistà et al., 2016). To measure the extracellular lipase activity, media were prepared as shown in Table 2. Each strain was inoculated onto plates containing 1% Tween 20 (LT20) or 1% Tween 80 (LT80) and incubated at 18℃ and 12℃ for 9 days. The strain suspension was inoculated at two spots with 5 μL of a 104 /mL spore suspension. The enzymatic activity indices for the lipolytic plate assays were determined as previously described (Hankin and Anagnostakis, 1975). The semiquantitative EI was calculated as EI=H/C, where H represents the diameter of the visible precipitation zone produced by the formation of calcium salt crystals from the enzymatic hydrolysis of the ester bond in the presence of lauric acid (Tween 20) or oleic acid (Tween 80), and C is the diameter of the fungal colony. The precipitation zone around the colony was measured (mm) daily over a span of 9 days using a ruler along two diametrically opposed directions (Lumi Abe et al., 2015).
Optimization of growth rate
To determine optimal growth conditions, the strains were inoculated onto meat agar prepared using fermented sausage recipes and NaCl agar prepared by adding different concentrations of NaCl (1%, 2%, 4%, and 6% w/v) to malt extract agar. Each isolate was inoculated with 2 μL (108 spores/mL) at three spots on both the meat and NaCl plates. Subsequently, the plates were incubated at 25℃ for 5–7 days and the growth size was determined using Image J software.
Manufacture of dry fermented sausages
To evaluate the fermented sausages manufactured with the identified SJ02 strain, we prepared dry fermented sausages. A mixture of minced pork hindlegs (85%) and fat (15%) was seasoned with salt (2.5%), sodium nitrite (0.015%), pepper (0.3%), red wine (0.4%), dextrose (0.5%), and coriander (0.05%). Additionally, a 0.0125% LAB starter (TRADI 302, Chr. Hansen) was integrated into the mixture. The meat batter was then carefully packed into fibrous casings with a diameter of 40 mm, and the surfaces of the casings were punctured using a sausage pricker. Suspensions of fungal starter cultures (M600 and SJ02) were meticulously adjusted to a concentration of 108 spores/mL and evenly applied to hanging sausages using liquid mold spray (approximately 150 mL). The sausages were incubated for 48 h at 25℃ with a RH of approximately 90%. This was followed by a subsequent 4-day drying phase at 18℃ and 75% RH. The curing process was approximately 27 days at 12℃ and 70% RH. Throughout the manufacturing process, the sausages were continuously monitored for weight loss, which was tracked until they reached 40% (w/w), signifying the successful completion of the fermentation process. Dry fermented sausages were sampled from each batch to evaluate their physical, chemical, microbiological, and sensory characteristics. All assessments were performed three times for each batch.
Food born pathogen analysis from fermented sausage
Detection evaluation of Bacillus cereus, Clostridium perfrigens, Staphylococcus aureus, Listeria monocytogenes, and Escherichia coli O157:H7 was conducted in manufactured sausages. To evaluate microbial safety, 25 g of each sausage sample was aseptically collected, transferred to a stomacher sample bag, and homogenized in 225 mL of the respective suspension media using a model WES-400 Stomacher WiseMix (Daihan Scientific, Wonju, Korea). Appropriate dilutions were spread onto the selective media listed in Table 3 (Kim et al., 2008).
Table 3. Selective media for foodborne pathogens
Color analysis
Sausage color was measured in the samples (six 2-cm thick cubic shapes without casing) using a model CR-400 colorimeter (Minolta Camera, Tokyo, Japan) calibrated with the manufacturer’s white calibration plate (CIE L*=93.7, CIE a*=0.3158, and CIE b*=0.3322). The mean values of triplicate measurements for each sample represented the CIE L*, CIE a*, and CIE b* (Essid and Hassouna, 2013).
Texture profile analysis
To test the texture properties, a model TX-700 texture analyzer (Lamy Rheology, Champagne-au-Mont-d'Or, France) was used as previously described (Essid and Hassouna, 2013). More than six cubic samples (2×2×2 cm) of each sample were evaluated. The test was performed by compressing with a cylinder probe (2 cm diameter) at the following conditions: a speed of 1 mm/s, distance of 16 mm, force start of 1 N, wait position at 0.1 mm, up speed of 5 mm/s, and delay for 2 s, while employing the two-bite test methodology, consistent with the sampling technique used for color analysis. The hardness (N), adhesiveness (mJ), cohesiveness (N), gumminess (N), and chewiness (N) of the samples were calculated using texture profile analysis (TPA) curves.
Thiobarbituric acid reactive substance analysis
To evaluate the rancidity of the fermented sausages, thiobarbituric acid reactive substance (TBARS) was measured as previously described (Woo et al., 2023). Approximately 3.5 g of the sample was mixed with 500 μL of 0.01% butylated hydroxytoluene and an extraction solvent composed of 7% trichloroacetic acid, 4 N HCl, and 4% HClO4. The homogenate was filtered through the Whatman No. 41 filter paper (Whatman, Little Chalfont, UK). Next, 2 mL of the filtered solution was combined with 2 mL of 20 mM TBA and heated at 80℃ for 60 min. After cooling in cold water for 10 min, the absorbance of the solution was measured at 534 nm by using a Multiskan Go spectrophotometer (Multiskan Go, Thermo Fisher Scientific, Waltham, MA, USA). The TBARS values were determined using a standard curve.
Electronic nose
Volatile compounds present in the samples were analyzed using the Heracles II electronic nose (E-nose) system (Alpha MOS, Toulouse, France). Approximately 1 g of each sample without casing was placed in a 20 mL headspace vial. The headspace vial were then incubated at 60℃ for 20 min while being agitated at 500 rpm to promote the generation of volatile compounds. The collected volatile compounds were coupled to the E-nose system using an automatic sampler. For the gas chromatography analysis, 3 mL of volatile compounds were injected at a speed of 125 μL/s and a temperature of 200℃ into the gas injection port connected to the E-nose. The analysis was conducted using MXT-5 and MXT-1701 columns, with an incubation temperature of 50℃ and a total analysis time of 10 min. Separated peaks were identified and confirmed using AlphaSoft version 14.2 (Alpha MOS, Toulouse, France) integrated into the E-nose system (Hong et al., 2021).
Electronic tongue
An Astree electronic tongue (E-tongue) system (Alpha MOS) was used to examine the taste of the samples. The samples were diluted 1:100 in distilled water, homogenized, and filtered prior to analysis. The E-tongue sensor includes five taste component sensors (AHS-sourness, CTS-saltiness, NMS-umami, PKS-sweetness, and ANS-bitterness) and two index sensors (CPS and SCS) that simulate human sensory responses. The sensor values of CPS and SCS were employed for calibration. For analysis, the E-tongue sensor was exposed to the sample extract for 2 min, and the strength of the sensor response to individual taste components was measured through contact. To ensure accuracy and prevent cross-contamination, the individual taste component sensors were washed with purified water for each analysis. The results were verified using AlphaSoft version 14.2 (Hong et al., 2021; Tian et al., 2020).
Statistical analysis
All experiments were conducted in at least three replicates. Enzyme activity assays, growth assays, color analyses, and sensory evaluations were performed by one-way analysis of variance using the GraphPad Prism 9 software (GraphPad Software, La Jolla, CA, USA). TPA and TBARS assays were performed using independent t-tests. Significant differences between data were determined using Dunnett's tests (p< 0.05).
Results and Discussion
Isolation and identification of Penicillium nalgiovense
Of the 72 strains obtained from Nuruk, Jeotgal, and the mudflats, 24 were chosen based on their colony morphology. They all belonged to the genus Penicillium (Table 4). The two strains were definitively identified as P. nalgiovense by ITS sequencing. The resulting phylogenetic tree was presented in Fig. 1A for P. nalgiovense OBF SD01 and Fig. 1B for P. nalgiovense OBF SJ02. Microscopic analysis of the conidial morphology of the two selected strains confirmed the characteristic Penicillium conidial shape (Fig. 2). Under the microscope, the combination of septate hyphae, branching at acute angles, erect conidiophores with radiate conidial heads, and chains of conidia give Penicillium its unique and recognizable appearance. These strains were designated P. nalgiovense OBF SD01 (KACC83057BP) and P. nalgiovense OBF SJ02 (KACC83058BP) and were formally deposited in the Korean Agricultural Culture Collection (KACC).
Table 4. Isolates identified by ITS sequencing
1) Mudflat (Seondori-1 to 13), it was isolated from Seondo-ri mud flats located in Biin-myeon, Seocheon-gun, Chungcheongnam-do, South Korea; Nuruk-1, Sanseong nuruk (Hwawangsan); Nuruk-2 to 3, Sanseong nuruk (Geumjeong); Nuruk-4, Songhakgokja (Soyulgok).
ITS, internal transcribed spacer.
Fig. 1. Phylogenetic analysis of ITS1, 4 sequence of Penicillium nalgiovense SD01 (A) and SJ02 (B). The number in each branch indicates bootstrap values obtained after a bootstrap test with 1,000 replications. The neighbor-joining tree displays values of divergence between ITS region sequences. ITS, internal transcribed spacer.
Fig. 2. Microscopic image of Penicillium nalgiovense isolates stained using lacophenol cotton blue stain. Conidiophores of P. nalgiovense isolates and M600 (100×). M600, commercial starter culture; SD01, P. nalgiovense SD01; SJ02, P. nalgiovense SJ02.
Mycotoxin production by the fungal starter is shown in Fig. 3. Consistent with previous studies, the toxin production capabilities of the isolates were evaluated alongside P. roquefortii Thom (KCTC 6080) and P. chrysogenum (KCTC 6933), which are mycotoxin-producing strains as positive strains (Andersen and Frisvad, 1994; El-banna et al., 1987; Laich et al., 1999; Lopez-Diaz and Flannigan, 1997; López-Díaz et al., 2001; Ludemann et al., 2009; Papagianni et al., 2007).
Fig. 3. PCR screening of mycotoxin target gene from Penicillium strains. (A) M600, commercial starter culture. (B) SD01, Penicillium nalgiovense SD01. (C) SJ02, P. nalgiovense SJ02. L, 100 bp Plus DNA Ladder; line 1, β-tubulin (BenA); line 2, Aflatoxin (omt-1); line 3, Ochratoxin A (otanpsPN); line 4, Patulin (idh); line 5, Sterigmatocystin (fluG); line 6, Cyclopiazonic acid (dmaT); line 7, Penicillin (pcbAB); line 8, Penicillin (penDE); line 9, Mycophenolic acid (mpaC); line 10, Roqueforine C (rds/roqA); and line 11, Penicillin (pcbC). PCR, polymerase chain reaction.
DNA extracted from both P. roquefortii Thom (KCTC 6080) and P. chrysogenum (KCTC 6933) as positive controls and selected strains was identified as belonging to the genus Penicillium. This identification was based on the amplified sequences of the ITS and β-tubulin housekeeping genes specific to P. nalgiovense (data not shown). The expression of two PC strains producing Mycophenolic acid and Penicillin were also confirmed. Upon evaluation of the isolated strains SD01 and SJ02, it was observed that the major mycotoxins producing genes including Aflatoxin, Ochratoxin A, Patulin, and Cyclopiazonic acid, were not detected. However, Sterigmatocystin (fluG), Penicillin (pcbAB), Penicillin (penDE), Mycophenolic acid (mpaC), Roqueforine C (rds/roqA), and Penicillin (pcbC) was detected. Profiles of genes exhibited patterns similar to those of the M600 commercial strain. Despite P. nalgiovense being the most frequently used starter culture for aged and fermented meat products, the fact that this fungus can secrete penicillin into the meat product underscores the importance of obtaining strains that are incapable of synthesizing this antibiotic (Andersen and Frisvad, 1994). It appears that the M600 strain can also secrete antibiotics, suggesting the importance of employing gene disruption techniques to further ensure the safety of our strains for application in the food industry (Laich et al., 2003). However, it has been reported that significant amounts of penicillin were found in the casing and the outer layer of salami meat during the early stages of the curing process, coinciding with fungal colonization, but no penicillin was detected in the cured salami (Laich et al., 1999). Therefore, even though the penicillin synthesis genes exist, the potential for them to be eliminated by penicillinase during the ripening of fermented sausages suggests that our strains might be necessary for faster application in the food industry.
Enzymatic activity assay
The enzymatic activity of protease and lipase plays a crucial role in the manufacturing of dry fermented sausages, significantly influencing both the flavor and texture of the final product. Therefore, evaluating the enzymatic activity is considered essential for discovering new fungal starters (Magistà et al., 2016). To observe the proteolytic and lipolytic enzyme activities of three P. nalgiovense strains (SD01, SJ02, and M600), spores were cultured on SP and sodium-proteolytic-PDA (SPP) media for measuring proteolytic enzyme activity and LT20 and LT80 media for lipolytic enzyme activity. The clearance halo areas around the colonies were measured from day 2 to day 9. Fig. 4, a displays colony corresponding to days 2, 5, and 10, and quantitative values for the EI were presented (Fig. 4B). SJ02 exhibited the earliest clearance halo on SP media, followed by M600 showing similar activity, while SD01 showed the latest activity on day 9. However, in SPP media supplemented with PDA, which contained rich nutrition to fungal growth, M600 and SD01 showed similar levels of activity, with SJ02 displaying slightly delayed activity. The strain not significantly affected by the nutrient environment in terms of proteolytic activity are suggested to be the control fungi M600 and SJ02. Moreover, lipolytic enzyme activity of SJ02 was shown to be the highest in both LT20 and LT80 media, particularly showing a continuous increase trend in LT20.
Fig. 4. Enzymatic index (EI) calculated activity of the isolates. Indices of activity determined in proteolytic (SP and SPP) and lipolytic (LT20 and LT80) plate assays. M600, commercial starter culture; SD01, Penicillium nalgiovense SD01; SJ02, P. nalgiovense SJ02. SP and SPP were detected at 2–9 days. LT20 and LT80 plates were detected at 5–9 days. SP, sodium-proteolytic; SPP, sodium-proteolytic-PDA; PDA, potato dextrose agar; LT20, lipolytic-tween20; LT80, lipolytic-tween80. Statistical significance is indicated as * p<0.05, ** p<0.01, and *** p<0.001 compared to M600.
In the CCFE activity assay, the precipitation zone reflects lipolytic enzyme activity. The precipitation zone diameter of SJ02 (2.184 mm) was significantly larger than that of M600 (1.635 mm) at the first day. On the second day, the lipolytic enzyme activity of M600 was 2.168 mm, whereas that of SJ02 was 2.668 mm, confirming that the lipolytic enzyme activity of SJ02 had substantially increased (Fig. 5). These findings suggest that the two isolated strains of P. nalgiovense we identified could potentially contribute more effectively to the breakdown of fat and protein in meat and to the traditional flavor development process than the M600 strain (Toldrá, 2010).
Fig. 5. Extracellular enzymatic activities confirmed in assays of crude cell free extract (CCFE). M600, commercial starter culture; SD01, Penicillium nalgiovense SD01; SJ02, P. nalgiovense SJ02. All strains were cultured in Proteo M broth and CHO lipo broth to generate CCFE. These extracts were used for the enzymatic assays, with clearance halos on SKMA and precipitation zones on BMT20. The results strongly indicate the extracellular localization of enzymatic activity. Statistical significance is indicated as *** p<0.001 compared to M600.
The findings suggest that SJ02, in particular, might be a superior candidate due to its high proteolytic and lipolytic activities, which are crucial for the development of flavor and texture in dry fermented sausages (Galvalisi et al., 2012). The use of strains like SJ02 could contribute to enhancing the quality of meat products by promoting a more efficient breakdown of proteins and fats, thus potentially improving the sensory characteristics of the final product. Recently, there has been active research into utilizing lactic acid bacteria starters, such as Staphylococcus or Lactobacillus, to further enhance the flavor of fermented sausages (Kieliszek et al., 2021; Uppada et al., 2017; Wang et al., 2022). It is necessary to discover Korean fermented food-derived lactic acid bacteria that can provide optimal sensory qualities with SJ02 traits.
Optimization of growth rate
Because P. nalgiovense is widely recognized for its beneficial role in the early colonization of fermented sausages, contributing significantly to the flavor development, prevention of undesirable molds, and appearance and safety of the final product, it is well known that it is very important for candidate fungi to proliferate rapidly in the early stages (Laranjo et al., 2019; Magistà et al., 2016). To compare the growth of fungi without directly manufacturing sausages, we prepared culture dishes under the seasoning conditions as those used for sausage production (Manufacture of dry fermented sausages in Materials and Methods) and inoculated these plates with spores from each strain to observe their growth. The assessment of growth rates on meat plates yielded similar growth patterns for the three strains, establishing strain adaptability and growth performance (Fig. 6). To determine the optimal salinity conditions, the growth rates were compared at different concentrations of NaCl. The growth rates of all three strains were higher at 2% NaCl than at other concentrations. Notably, SJ02 exhibited a significantly higher growth rate (16.47 mm) on day 3 than SD01 (15.48 mm) and M600 (13.19 mm). These results indicate that SJ02 is a promising strain for producing industrially fermented meat products.
Fig. 6. Growth optimization. (A) Growth optimization of fungal starters on meat plates for dry fermented sausage. M600, commercial starter culture; SD01, Penicillium nalgiovense SD01; SJ02, P. nalgiovense SJ02. Statistical significance is indicated as * p<0.05 and ** p<0.01 compared to M600. (B) Optimization of growth rate of the isolates evaluated on solid media using different concentrations of NaCl. In comparison to 1% NaCl, significant differences in growth rates are denoted as * p<0.05, ** p<0.01, and *** p<0.001. A graph comparing the growth rates of fungal starters at the optimized salinity level (2% NaCl) with M600 as the reference showed significant differences (* p<0.05 and ** p<0.01).
Microbiological safety of dry fermented sausage
To ensure the safety against undesirable bacteria, specifically pathogenic bacteria, when making fermented sausages using SJ02 and M600, both quantitative and qualitative analyses of Bacillus cereus, Clostridium perfringens, Staphylococcus aureus, Listeria monocytogenes, Escherichia coli O157:H7, and Salmonella spp. were examined. Additionally, the mycotoxins Aflatoxin and Ochratoxin A were also analyzed. The microbiological safety and toxin safety of fermented sausages using the SJ02 strain were verified to be as safe as those with the M600 strain. No quantitative changes in the lactic acid bacteria starter named Bactoferm TRADI 302, which contains Lactobacillus sakei, Staphylococcus carnosus, and Staphylococcus xylosus, were observed (Table 5). The application of SJ02 in dry fermented sausage production can ensure food safety by preventing the proliferation of harmful foodborne pathogens (Bernáldez et al., 2017; Büchter et al., 2020; Hankin and Anagnostakis, 1975).
Table 5. Microbiological safety assessment of dry fermented sausages
1) M600, manufactured fermented sausage with commercial starter culture; SJ02, manufactured fermented sausage with Penicillium nalgiovense SJ02; (–), negative.
CFU, colony-forming unit.
Quality assay of dry fermented sausages
As fatty acid oxidation progresses, levels of malondialdehyde (MDA) and acetal compounds increase. These compounds are correlated with food deterioration and thus serve as parameters of meat product freshness. The reaction of 2-TBA with these compounds produces a colored complex, which is a widely accepted evaluating method of the extent of fatty acid degradation and oxidation. Unsaturated fatty acids are susceptible to oxidation, generating peroxides such as hydroperoxides that can damage proteins and DNA, induce mutations and carcinogenesis, and compromise food quality. A TBARS value exceeding 1 MDA ppm (μg/mL) is considered high rancidity and renders the product inedible (RDA, 2009). The TBARS value for dry fermented sausages with SJ02 was <1 MDA ppm (μg/mL); it is considered safe for fatty acid deterioration in meat products (Table 6).
Table 6. Evaluation of quality parameters in dry fermented sausages using mold starters M600 and SJ02
The results are presented as mean±SD.
1) M600, manufactured fermented sausage with commercial starter culture; SJ02, manufactured fermented sausage with Penicillium nalgiovense SJ02.
2) Mean±SD (n=3).
3) Mean±SD (n=6).
* p<0.05 indicates a significant difference in the measured values compared to M600.
MDA, malondialdehyde; TBARS, thiobarbituric acid reactive substance; TPA, texture profile analysis.
The dry fermented sausages made with SJ02, identified from domestic source in this study, have consequently similar color and texture characteristics compared with those made with the commercial starter M600. Specifically, no significant differences were observed between M600 and SJ02 sausages. In addition, textural indicators, such as hardness, cohesiveness, gumminess, and chewiness, were not significantly different between sausages made with M600 and SJ02 when analyzed using a texture analyzer. Only adhesiveness value in SJ02 sausages was higher (p<0.05) than that in M600 sausages (Table 6). Notably, one of the main role of fungal starters has been recognized as influencing the flavor and texture of dry fermented sausages (Casaburi et al., 2008). These factors significantly shape consumer preferences and have been actively investigated to enhance the quality of dry fermented sausages (Bourdichon et al., 2012; Fadda et al., 2010). Similar quality characteristics to the current research can be observed in previous studies (Chinaglia et al., 2014; Fadda et al., 2001; Seong et al., 2008; Tian et al., 2020; Witte et al., 1970; Yang et al., 2018; Zhao et al., 2011). It implies that SJ02 found in this study could be as good a fungal starter culture as commercial stater cultures without compromising quality.
Electronic nose and electronic tongue analyses
The E-nose technology have been used to determine aroma and taste profiles in targeted food products, serving as an indicator of the olfactory and gustatory perceptions experienced by consumers during the consumption of food. The present study used the E-nose technique to systemically evaluate the distinct flavor and taste of dry fermented sausages influenced by each strain (Jeong et al., 2022).
In the E-nose analysis, M600 sample exhibited elevated levels of ethanol and propanal, which are associated with pungent odors, in comparison to SJ02 sample. Conversely, the concentrations of propan-2-one and butyl butanoate, which represent fruity characteristics, were higher in SJ02 than in M600 (Fig. 7). Notably, E-nose analysis revealed that the different utilization of the fungal starters, M600 and SJ02, in fermented dry sausages led to variation in the composition of the final products. These observations suggest the potential for future investigations to identify difference in flavor and taste between sausages manufactured using M600 and SJ02 strains, thus confirming the distinct characteristics of SJ02-isolated fermented sausages in South Korea.
Fig. 7. Sensory compounds of dry fermented sausage analyzed by E-nose and E-tongue. (A) Volatile compounds of dry fermented sausage using fungal starters. Peaks are reported in order of elution: 1, ethanol; 2, propan-2-one; 3, 2-methylpropanal; 4, butan-2-one; 5, methyl propanoate; 6, 3-methyl-1-butanol; 7, (E)-2-hexenal; 8, butyl butanoate; 9, 1, 8-cineole; 10, propanal; 11, propan-2-one; 12, butanal; 13, butan-2-one; 14, 3-methyl-1-butanol; and 15, 4-methylhexan-1-ol. M600, manufactured fermented sausage with commercial starter culture; SJ02, manufactured fermented sausage with Penicillium nalgiovense SJ02. **** p<0.0001 compared to M600. (B) E-tongue analysis results of dry fermented sausage using fungal starters. AHS (sourness), sourness, astringency, bitterness; PKS (sweetness), sweetness; CTS, saltness; NMS (umami), umami, saltness, astringency; and ANS, bitterness. M600, manufactured fermented sausage with commercial starter culture; SJ02, manufactured fermented sausage with P. nalgiovense SJ02. E-nose, electronic nose; E-tongue, electronic tongue.
The results of the E-tongue analysis are presented as a radar graph, representing taste profiles measured by the E-tongue in dry fermented sausages using the fungal starters M600 and SJ02 (Fig. 7). Each taste parameter, along with representative taste qualities, was determined using five taste sensors (AHS, PKS, CTS, NMS, and ANS; Ju et al., 2016).
The AHS sensor, which measures acidity and bitterness, primarily captures the acidity in fermented dried sausages. The AHS values were recorded as 7.3±0.2 for M600 and 4.7±2.0 for SJ02, indicating a lower level of bitterness in SJ02 and a higher level of acidity in M600. The CTS sensor, which evaluates saltiness, yielded values of 5.1±0.0 for M600 and 7.0±0.9 for SJ02, highlighting a higher level of saltiness in the SJ02 sample. With regard to NMS sensor responsible for savory and salty tastes, M600 recorded 6.3±0.0, while SJ02 displayed 5.8±0.2, indicating a greater savory taste in M600. Finally, the ANS sensor, which detects bitterness, recorded 5.7±0.2 for M600 and 6.3±0.2 for SJ02, signifying elevated bitterness in SJ02.
When comparing the taste characteristics of fermented dried sausages produced using strains M600 and SJ02 through E-tongue analysis, no statistically significant differences were observed in the measured values between the two strains. The findings imply that fermented dried sausages crafted using the two strains had similar taste characteristics. Therefore, the potential utilization of the SJ02 strain for adjusting the taste attributes of fermented dried sausages in accordance with the microbial strain is suggested. However, further studies are necessary including sensory evaluations conducted by trained panels that consider a range of diverse taste perceptions (Van Ba et al., 2018).
Conclusion
This study identified two P. nalgiovense strains, SD01 and SJ02, as potential starter cultures for fermented sausages from Korean sources. SJ02, in particular, showed enhanced enzymatic activities and growth in high-salinity conditions compared to a commercial starter, M600. Fermented sausages applied with SJ02 exhibited improved enzymatic activity and safety, and we found that SJ02 fermented sausages exhibited similar qualities to M600 fermented sausages, confirming the potential of our isolate SJ02 as a domestic commercial strain to replace M600.
Conflicts of Interest
The authors declare no potential conflicts of interest.
Acknowledgements
The authors thank the Jeonbuk Institute for Food and Bioindustry for granting access to their Texture Profile Analysis facilities.
Author Contributions
Conceptualization: Choe J, Oh S. Data curation: Lee S, Kang Minji, Kim S. Formal analysis: Choe J, Oh S. Methodology: Lee S, Oh S. Software: Choe J. Investigation: Lee S, Kang Minkyoung. Writing - review & editing: Lee S, Choe J, Kang Minji, Kang Minkyoung, Kim S, Oh S.
Ethics Approval
This article does not require IRB/IACUC approval because there are no human and animal participants.
References
- Andersen SJ, Frisvad JC. 1994. Penicillin production by Penicillium nalgiovense. Lett Appl Microbiol 19:486-488.
- Bernaldez V, Cordoba JJ, Andrade MJ, Alia A, Rodriguez A. 2017. Selection of reference genes to quantify relative expression of ochratoxin A-related genes by Penicillium nordicum in dry-cured ham. Food Microbiol 68:104-111.
- Bernaldez V, Cordoba JJ, Rodriguez M, Cordero M, Polo L, Rodriguez A. 2013. Effect of Penicillium nalgiovense as protective culture in processing of dry-fermented sausage "salchichon". Food Control 32:69-76.
- Biaggio RT, da Silva RR, Rosa NG, Leite RSR, Arantes EC, Cabral TPF, Juliano MA, Juliano L, Cabral H. 2016. Purification and biochemical characterization of an extracellular serine peptidase from Aspergillus terreus. Prep Biochem Biotechnol 46:298-304.
- Bourdichon F, Casaregola S, Farrokh C, Frisvad JC, Gerds ML, Hammes WP, Harnett J, Huys G, Laulund S, Ouwehand A, Powell IB, Prajapati JB, Seto Y, Schure ET, Boven AV, Vankerckhoven V, Zgoda A, Tuijtelaars S, Hansen EB. 2012. Food fermentations: Microorganisms with technological beneficial use. Int J Food Microbiol 154:87-97.
- Buchter C, Koch K, Freyer M, Baier S, Saier C, Honnen S, Watjen W. 2020. The mycotoxin beauvericin impairs development, fertility and life span in the nematode Caenorhabditis elegans accompanied by increased germ cell apoptosis and lipofuscin accumulation. Toxicol Lett 334:102-109.
- Casaburi A, Di Monaco R, Cavella S, Toldra F, Ercolini D, Villani F. 2008. Proteolytic and lipolytic starter cultures and their effect on traditional fermented sausages ripening and sensory traits. Food Microbiol 25:335-347.
- Chinaglia S, Chiarelli LR, Maggi M, Rodolfi M, Valentini G, Picco AM. 2014. Biochemistry of lipolytic enzymes secreted by Penicillium solitum and Cladosporium cladosporioides. Biosci Biotechnol Biochem 78:245-254.
- Chung KY, Lee MS, Yim DG. 2017. The effects of different curing agents on VBN, TBA and microbial changes of fermented sausages during aging. J Agric Life Sci 51:141-147.
- El-banna AA, Pitt JI, Leistner L. 1987. Production of mycotoxins by penicillium species. Syst Appl Microbiol 10:42-46.
- Essid I, Hassouna M. 2013. Effect of inoculation of selected Staphylococcus xylosus and Lactobacillus plantarum strains on biochemical, microbiological and textural characteristics of a tunisian dry fermented sausage. Food Control 32:707-714.
- Fadda S, Lopez C, Vignolo G. 2010. Role of lactic acid bacteria during meat conditioning and fermentation: Peptides generated as sensorial and hygienic biomarkers. Meat Sci 86:66-79.
- Fadda S, Vignolo G, Aristoy MC, Oliver G, Toldra F. 2001. Effect of curing conditions and Lactobacillus casei CRL705 on the hydrolysis of meat proteins. J Appl Microbiol 91:478-487.
- Farber P, Geisen R. 1994. Antagonistic activity of the food-related filamentous fungus Penicillium nalgiovense by the production of penicillin. Appl Environ Microbiol 60:3401-3404.
- Frisvad JC, Houbraken J, Popma S, Samson RA. 2013. Two new Penicillium species Penicillium buchwaldii and Penicillium spathulatum, producing the anticancer compound asperphenamate. FEMS Microbiol Lett 339:77-92.
- Galvalisi U, Lupo S, Piccini J, Bettucci L. 2012. Penicillium species present in uruguayan salami. Rev Argent Microbiol 44:36-42.
- Geisen R, Lucke FK, Krockel L. 1992. Starter and protective cultures for meat and meat products. Fleischwirtschaft 72:894-898.
- Hankin L, Anagnostakis SL. 1975. The use of solid media for detection of enzyme production by fungi. Mycologia 67:597-607.
- Hong SJ, Boo CG, Heo SU, Jo SM, Jeong H, Yoon S, Lee Y, Park SS, Shin EC. 2021. Investigation of taste and flavor properties of radish varieties harvested in Korea using electronic tongue and electronic nose. Korean J Food Sci Technol 53:375-381.
- Jeong CH, Lee SH, Kim HY. 2022. Microbiological composition and sensory characterization analysis of fermented sausage using strains isolated from Korean fermented foods. Food Sci Anim Resour 42:928-941.
- Ju MG, Kim JH, Jang HJ, Yeon SJ, Hong GE, Park W, Seo HG, Lee CH. 2016. Changes of physicochemical and sensory properties of fermented sausage from sulfur-fed pork. Korean J Food Sci Anim Resour 36:729-736.
- Kieliszek M, Pobiega K, Piwowarek K, Kot AM. 2021. Characteristics of the proteolytic enzymes produced by lactic acid bacteria. Molecules 26:1858.
- Kim MG, Oh MH, Lee GY, Hwang IG, Kwak HS, Kang YS, Ko YH, Jun HK, Kwon KS. 2008. Analysis of major foodborne pathogens in various foods in Korea. J Food Sci Biotechnol 17:483-488.
- Kimura M. 1980. A simple method for estimating evolutionary rates of base substitutions through comparative studies of nucleotide sequences. J Mol Evol 16:111-120.
- Laich F, Fierro F, Cardoza RE, Martin JF. 1999. Organization of the gene cluster for biosynthesis of penicillin in Penicillium nalgiovense and antibiotic production in cured dry sausages. Appl Environ Microbiol 65:1236-1240.
- Laich F, Fierro F, Martin JF. 2003. Isolation of Penicillium nalgiovense strains impaired in penicillin production by disruption of the pcbab gene and application as starters on cured meat products. Mycol Res 107:717-726.
- Laranjo M, Potes ME, Elias M. 2019. Role of starter cultures on the safety of fermented meat products. Front Microbiol 10:853.
- Leistner L. 1994. Starter and protective cultures for foods in Europe. Proceedings of MICON-International: 94 and 35th Annual Conference of Association of Microbiologists of India, Mysore, India. pp 417-423.
- Lopez-Diaz TM, Flannigan B. 1997. Mycotoxins of Aspergillus clavatus: Toxicity of Cytochalasin E, Patulin, and extracts of contaminated barley malt. J Food Prot 60:1381-1385.
- Lopez-Díaz TM, Santos JA, García-Lopez ML, Otero A. 2001. Surface mycoflora of a spanish fermented meat sausage and toxigenicity of Penicillium isolates. Int J Food Microbiol 68:69-74.
- Ludemann V, Pose G, Moavro A, Maliaviabarrena MG, Fandino R, Ripoll G, Basilico JC, Pardo AG. 2009. Toxicological assessment of Penicillium nalgiovense strains for use as starter cultures in the manufacture of dry fermented sausages. J Food Prot 72:1666-1670.
- Lumi Abe CA, Bertechini Faria C, Fernandes De Castro F, De Souza SR, dos Santos FC, Novais Da Silva C, Tessmann DJ, Barbosa-Tessmann IP. 2015. Fungi isolated from maize (Zea mays L.) grains and production of associated enzyme activities. Int J Mol Sci 16:15328-15346.
- Magista D, Ferrara M, Del Nobile MA, Gammariello D, Conte A, Perrone G. 2016. Penicillium salamii strain item 15302: A new promising fungal starter for salami production. Int J Food Microbiol 231:33-41.
- Moavro A, Stenglein S, Delfederico L, Wagner J, Ludemann V. 2019. Novel use of Penicillium nalgiovense on stuffed semi-hard and hard cheeses. LWT-Food Sci Technol 110:255-261.
- Ojo-Okunola A, Claassen-Weitz S, Mwaikono KS, Gardner-Lubbe S, Zar HJ, Nicol MP, du Toit E. 2020. The influence of DNA extraction and lipid removal on human milk bacterial profiles. Methods Protoc 3:39.
- Papagianni M, Ambrosiadis I, Filiousis G. 2007. Mould growth on traditional greek sausages and penicillin production by Penicillium isolates. Meat Sci 76:653-657.
- Philipp S, Pedersen PD. 1988. Mould cultures for the food industry: A short review with special reference to the cheese- and sausage production. Danish Dairy Food Ind 6:8-12.
- Radulovic Z, Zivkovic D, Mirkovic N, Petrusic M, Stajic S, Perunovic M, Paunovic D. 2011. Effect of probiotic bacteria on chemical composition and sensory quality of fermented sausages. Procedia Food Sci 1:1516-1522.
- Rodriguez A, Rodriguez M, Isabel Luque M, Justesen AF, Cordoba JJ. 2012. A comparative study of DNA extraction methods to be used in real-time pcr based quantification of ochratoxin A-producing molds in food products. Food Control 25:666-672.
- Rural Development Administration [RDA]. 2009. Development of strater for the production of Korean style fermented sausage. Rural Development Administration, Suwon, Korea.
- Rural Development Administration [RDA]. 2018. Screening of starter cultures and development of utilization technology for Korean fermented sausage. Rural Development Administration, Jeonju, Korea.
- Saitou N, Nei M. 1987. The neighbor-joining method: A new method for reconstructing phylogenetic trees. Mol Biol Evol 4:406-425.
- Seong PN, Kim JH, Cho SH, Lee CH, Kang DW, Hah KH, Lim DG, Park BY, Kim DH, Lee JM. 2008. The effects of salt and NaNO2 on physico-chemical characteristics of dry-cured ham. Korean J Food Sci Anim Resour 28:493-498.
- Singh BJ, Dincho D. 1994. Molds as protective cultures for raw dry sausages. J Food Prot 57:928-930.
- Spotti E, Berni E, Cacchioli C. 2008. Characteristics and applications of molds. In Meat biotechnology. Toldra F (ed). Springer, New York, NY, USA. pp 181-195.
- Tian X, Li ZJ, Chao YZ, Wu ZQ, Zhou MX, Xiao ST, Zeng J, Zhe J. 2020. Evaluation by electronic tongue and headspaceGC-IMS analyses of the flavor compounds in dry-cured pork with different salt content. Food Res Int 137:109456.
- Toldra F. 2010. Handbook of meat processing. John Wiley & Sons, Hoboken, NJ, USA.
- Uppada SR, Akula M, Bhattacharya A, Dutta JR. 2017. Immobilized lipase from Lactobacillus plantarum in meat degradation and synthesis of flavor esters. J Genet Eng Biotechnol 15:331-334.
- Van Ba H, Seo HW, Seong PN, Kang SM, Kim YS, Cho SH, Park BY, Ham JS, Kim JH. 2018. Lactobacillus plantarum (KACC 92189) as a potential probiotic starter culture for quality improvement of fermented sausages. Korean J Food Sci Anim Resour 38:189-202.
- Wang J, Hou J, Zhang X, Hu J, Yu Z, Zhu Y. 2022. Improving the flavor of fermented sausage by increasing its bacterial quality via inoculation with Lactobacillus plantarum MSZ2 and Staphylococcus xylosus YCC3. Foods 11:736.
- Witte VC, Krause GF, Bailey ME. 1970. A new extraction method for determining 2-thiobarbituric acid values of pork and beef during storage. J Food Sci 35:582-585.
- Woo SH, Sung JM, Park H, Kim J, Kim YJ, Kim TK, Lee H, Choi YS. 2023. Inhibitory effect of natural extract mixtures on microbial growth and lipid oxidation of sausages during storage. J Anim Sci Technol 65:225-243.
- Yang Z, Xue KS, Sun X, Williams PL, Wang JS, Tang L. 2018. Toxicogenomic responses to zearalenone in Caenorhabditis elegans reveal possible molecular mechanisms of reproductive toxicity. Food Chem Toxicol 122:49-58.
- Yim DG, Ali M, Nam KC. 2020a. Comparison of meat quality traits in salami added by nitrate-free salts or nitrate pickling salt during ripening. Food Sci Anim Resour 40:11-20.
- Yim DG, Shin DJ, Jo C, Nam KC. 2020b. Effect of sodium-alternative curing salts on physicochemical properties during salami manufacture. Food Sci Anim Resour 40:946-956.
- Yoon JY, Kim D, Kim EB, Lee SK, Lee M, Jang A. 2018. Quality and lactic acid bacteria diversity of pork salami containing kimchi powder. Korean J Food Sci Anim Resour 38:912-926.
- Zhao G, Lin X, Dou W, Tian S, Deng S, Shi J. 2011. Use of the smart tongue to monitor mold growth and discriminate between four mold species grown in liquid media. Anal Chim Acta 690:240-247.