Advances in materials Research

  • 제13권3호
  • /
  • Pages.173-181
  • /
  • 2024
  • /
  • 2234-0912(pISSN)
  • /
  • 2234-179X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Carbon nanotubes formation on clay and fly ash from catalytic thermal decomposition of recycled polypropylene

  • Nur A. Atikah Kamaruddin (Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis) ;
  • Norzilah A. Halif (Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis) ;
  • Siti A. Hussin (Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis) ;
  • Mohd. N. Mazlee (Centre of Excellence for Frontier Materials Research, Universiti Malaysia Perlis)
  • 투고 : 2023.08.24
  • 심사 : 2024.01.03
  • 발행 : 2024.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Fly ash, plastic waste, and clay are mineral materials and residues commonly found in Malaysia. In this study, these materials were fully utilized as raw materials for synthesizing carbon nanotubes (CNTs). Recycled polypropylene, previously used as a food container, served as a carbon source. Fly ash and clay were explored as potential substrates for CNTs growth. The recycled polypropylene was thermally decomposed at 900 ℃ in an inert environment for 90 minutes. Carbon atoms released during this process were deposited on fly ash and clay substrates, which had been immersed in a ferrocene solution to provide a metal catalyst for CNTs growth. The deposited products were characterized using a Scanning Electron Microscope (SEM) and X-Ray Diffraction (XRD). Morphological analysis revealed that both fly ash and clay were coated with fiber-like structures, confirmed to be CNTs based on a diffraction peak around 26° from the XRD pattern. In conclusion, clay and fly ash demonstrate the potential to be utilized as substrates for CNTs formation.

키워드

과제정보

This study was supported by Ministry of Higher Education (MoHE) Malaysia through the Fundamental Research Grant Scheme (FRGS) under a grant number of FRGS/1/2022/TK08/UNIMAP/02/76.

참고문헌

  1. Ahmad, M. and Silva, S.R.P. (2020), "Low-temperature growth of carbon nanotubes-A review", Carb., 158, 24-44. https://doi.org/10.1016/j.carbon.2019.11.061.
  2. Amigo, J.M., Serrano, F.J., Kojdecki, M.A., Bastida, J., Esteve, V., Reventos, M.M. and Marti, F. (2005), "Xray diffraction microstructure analysis of mullite, quartz and corundum in porcelain insulators", J. Eur. Ceram. Soc., 25(9), 1479-1486. https://doi.org/10.1016/j.jeurceramsoc.2004.05.019.
  3. Anusha, V., Eberechukwu Victoria, A., Yingduo, C. and Chris, P. (2019), "Carbon nanotube assembly and integration for applications nanoscale", Nanosc. Res. Lett., 14, 1-47. https://doi.org/10.1186/s11671-019-3046-3.
  4. Bhatt, A., Priyadarshini, S., Acharath Mohanakrishnan, A., Abri, A., Sattler, M. and Techapaphawit, S. (2019), "Physical, chemical, and geotechnical properties of coal fly ash: A global review", Case Stud. Constr. Mats., 11, e00263. https://doi.org/10.1016/j.cscm.2019.e00263.
  5. Dunens, O.M., MacKenzie, K.J. and Harris, A.T. (2009), "Synthesis of multiwalled carbon nanotubes on fly ash derived catalysts", Environ. Sci. Technol., 43(20), 7889-7894. https://doi.org/10.1021/es901779c.
  6. Ewis, D., Ba-Abbad, M.M., Benamor, A. and El-Naas, M.H. (2022), "Adsorption of organic water pollutants by clays and clay minerals composites: A comprehensive review", Appl. Clay Sci., 229, 106686. https://doi.org/10.1016/j.clay.2022.106686.
  7. Eskanlou, A. and Huang, Q. (2021), "Phosphatic waste clay: Origin, composition, physicochemical properties, challenges, values and possible remedies - A review", Min. Eng., 162, 106745. https://doi.org/10.1016/j.mineng.2020.106745.
  8. Ferreira, F.V., Franceschi, W., Menezes, B.R., Biagioni, A.F., Coutinho, A.R. and Cividanes, L.S. (2019), "Synthesis, characterization, and applications of carbon nanotubes". In Carbon-based nanofillers and their rubber nanocomposites", Carbon-Based Nanofillers and Their Rubber Nanocomposites, Elsevier, Amsterdam, Netherlands.
  9. Holmannova, D., Borsky, P., Svadlakova, T., Borska, L. and Fiala, Z. (2022), "Carbon nanoparticles and their biomedical applications", Appl. Sci., 12, 7865. https://doi.org/10.3390/app12157865.
  10. Liani, M., Moulay, N., Bourada, F., Addou, F.Y., Bourada, M., Tounsi, A. and Hussain, M. (2022), "A nonlocal integral Timoshenko beam model for free vibration analysis of SWCNTs under thermal environment", Adv. Mater. Res., 11(1), 1. https://doi.org/10.12989/amr.2022.11.1.001.
  11. Mattevi, C., Wirth, C.T., Hofmann, S., Blume, R., Cantoro, M., Ducati, C., ... and Robertson, J. (2008), "Insitu X-ray photoelectron spectroscopy study of catalyst support interactions and growth of carbon nanotube forests", J. Phys. Chem. C., 112(32), 12207-12213. https://doi.org/10.1021/jp802474g.
  12. Ramanathan, S., Gopinath, S.C.B., Arshad, M.K.M. and Poopalan, P. (2020), "Nanostructured aluminosilicate from fly ash: Potential approach in waste utilization for industrial and medical applications", J. Clean. Prod., 253, 119923. https://doi.org/10.1016/j.jclepro.2019.119923.
  13. Rao, J.B., Narayanaswami, P. and Prasad, K.S. (2010), "Thermal stability of nanostructured fly ash synthesized by high energy ball milling", Int. J. Eng. Sci. Technol., 2(5), 284-299. https://doi.org/10.4314/ijest.v2i5.62577.
  14. Saputri, D.D., Jan'ah, A.M. and Saraswati, T.E. (2020), "Synthesis of carbon nanotubes (CNT) by chemical vapor deposition (CVD) using a biogas-based carbon precursor: A review", IOP Conf. Ser.: Mater. Sci. Eng., 959, 012019. https://doi.org/10.1088/1757-899X/959/1/012019.
  15. Shah, K.A. and Tali, B.A. (2016), "Synthesis of carbon nanotubes by catalytic chemical vapour deposition: A review on carbon sources, catalysts and substrates", Mater. Sci. Semicond. Proc., 41, 67-82. https://doi.org/10.1016/j.mssp.2015.08.013.
  16. Sim, Z.H. (2017), "Synthesis and characterization of carbon nanomaterials (CNMs) using polypropylene (PP) waste as carbon precursor: Effect of reactor temperature", Bachelor of Materials Engineering Thesis, Universiti Malaysia Perlis, Perlis, Malaysia.
  17. Szabo, A., Gyulavari, T., Toth, Z.R., Papa, Z., Budai, J. and Hernadi, K. (2020), "The effect of various substrates and catalyst layer deposition on the incorporation of nitrogen into carbon nanotube forest structures", Thin Solid Films, 709, 138194. https://doi.org/10.1016/j.tsf.2020.138194.
  18. Xiao-Di, W., Vinodgopal, K. and Gui-Ping, D. (2019), "Synthesis of carbon nanotubes by catalytic chemical vapor deposition", Perspective of Carbon Nanotubes, IntechOpen, London, UK.