한국초전도ㆍ저온공학회논문지 (Progress in Superconductivity and Cryogenics)

  • 제25권3호
  • /
  • Pages.49-55
  • /
  • 2023
  • /
  • 1229-3008(pISSN)
  • /
  • 2287-6251(eISSN)
한국초전도저온학회 (The Korean Society of Superconductivity and Cryogenics)
권호 표지
DOI QR코드

DOI QR Code

Design of BOG re-liquefaction system of 20,000 m3 liquid hydrogen carrier

  • Byeongchang Byeon (LNG and Cryogenic Technology Center, Korea Institute of Machinery & Materials) ;
  • Hwalong You (Department of Energy Plant Technology, Korea Institute of Machinery & Materials) ;
  • Dongmin Kim (LNG and Cryogenic Technology Center, Korea Institute of Machinery & Materials) ;
  • Keun Tae Lee (LNG and Cryogenic Technology Center, Korea Institute of Machinery & Materials) ;
  • Mo Se Kim (LNG and Cryogenic Technology Center, Korea Institute of Machinery & Materials) ;
  • Gi Dock Kim (LNG and Cryogenic Technology Center, Korea Institute of Machinery & Materials) ;
  • Jung Hun Kim (LNG and Cryogenic Technology Center, Korea Institute of Machinery & Materials) ;
  • Sang Yoon Lee (LNG and Cryogenic Technology Center, Korea Institute of Machinery & Materials) ;
  • Deuk Yong Koh (LNG and Cryogenic Technology Center, Korea Institute of Machinery & Materials)
  • 투고 : 2023.07.11
  • 심사 : 2023.09.07
  • 발행 : 2023.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the design of a re-liquefaction system as a BOG (boil-off gas) handling process in liquid hydrogen transport vessels. The total capacity of the re-liquefaction system was assumed to be 3 ton/day, with a BOR (boil-off rate) of 0.2 %/day inside the cargo. The re-liquefaction cycle was devised using the He-Brayton Cycle, incorporating considerations of BOG capacity and operational stability. The primary components of the system, such as compressors, expanders, and heat exchangers, were selected to meet domestically available specifications. Case studies were conducted based on the specifications of the components to determine the optimal design parameters for the re-liquefaction system. This encompassed variables such as helium mass flow rate, the number of compressors, compressor inlet pressure and compression ratio, as well as the quantity and composition of expanders. Additionally, an analysis of exergy destruction and exergy efficiency was carried out for the components within the system. Remarkably, while previous design studies of BOG re-liquefaction systems for liquid hydrogen vessels were confined to theoretical and analytical realms, this research distinguishes itself by accounting for practical implementation through equipment and system design.

키워드

과제정보

This research is supported by the Ministry of Trade, Industry and Energy (MOTIE) and the Korea Energy Technology Evaluation and Planning (KETEP) (No. 20213030040460, Development of a Localization Model for Core technologies (CCS, BOG treatment, CHS system) of Liquid Hydrogen Carrier).

참고문헌

  1. Ryu, G. S., Jeong, S. G., & Lee, S. H. (2019). Paris Climate Change Agreement. Bulletin of the Society of Naval Architects of Korea, 56(4), 25-29.
  2. Stangarone, T. (2021). South Korean efforts to transition to a hydrogen economy. Clean technologies and environmental policy, 23, 509-516. https://doi.org/10.1007/s10098-020-01936-6
  3. No, G. T. (2020). Hydrogen fuel cell ship technology development trends. KIPE Magazine, 25(1), 49-53.
  4. Chun, D. K., Yoon, H. C., Jeong, S. K., & Jeong, S. U. (2021). Process Simulation Study of Liquid-phase Hydrogen Storage for Hydrogen Import from Overseas. Journal of Energy & Climate Change, 16(2), 188-203.
  5. Cho, W. R., Lee, H. Y., Ryu, B. R., & Kang, H. K.. (2020). Design and assessment of reliquefaction system according to boil off gas reliquefaction rate of liquefied hydrogen carrier. Journal of Navigation and Port Research, 44(4), 283-290. https://doi.org/10.5394/KINPR.2020.44.4.283
  6. Yun, S. K., & Yoon, N. E. (2020). Performance Improvement of Precooling Process and Cold Box in Hydrogen Liquefaction Process Using LNG Cold Energy. Journal of the Korean Institute of Gas, 24(4), 56-61. https://doi.org/10.7842/KIGAS.2020.24.4.56
  7. Lee. E., Kwak. J., Ryu. J., & Yoo. B. (2021). Development on Cargo Handling System of 20K-Class Liquefied Hydrogen Carrier. Korean Society of Mechanical Engineers Spring and Autumn Conference, 667-668.
  8. Ishimoto, Y., Voldsund, M., Neksa, P., Roussanaly, S., Berstad, D., & Gardarsdottir, S. O. (2020). Large-scale production and transport of hydrogen from Norway to Europe and Japan: Value chain analysis and comparison of liquid hydrogen and ammonia as energy carriers. International Journal of Hydrogen Energy, 45(58), 32865-32883. https://doi.org/10.1016/j.ijhydene.2020.09.017
  9. Berstad, D., Gardarsdottir, S., Roussanaly, S., Voldsund, M., Ishimoto, Y., & Neksa, P. (2022). Liquid hydrogen as prospective energy carrier: A brief review and discussion of underlying assumptions applied in value chain analysis. Renewable and Sustainable Energy Reviews, 154, 111772.
  10. Lee, C. S., Lee, J. Y., Kim, H. J., & Park, C. C. (2011). An exergy analysis of refrigeration system in small-scale gas liquefaction process. The Society Of Air-Conditioning And Refrigerating Enginners Of Korea, 495-498.
  11. Yoon, J., Son, C., Ko, J., Yeom, H., Jeong, H., Choi, J., ... & Lee, K. (2020). Exergy analysis of reverse Brayton cryogenic system using neon. Journal of the Korean Society for Power System Engineering, 24, 63-70.
  12. Park, J. H., Kim, Y. K., Jeong, S. K., & Kim, S. H. (2012). Design of Adiabatic Demagnetization Refrigerator for Hydrogen Re-Liquefaction. Progress in Superconductivity and Cryogenics, 14(3), 53-59. https://doi.org/10.9714/SAC.2012.14.3.053