Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical simulation of localization of a sub-assembly with failed fuel pins in the prototype fast breeder reactor

  • Abhitab Bachchan (Reactor Design and Technology Group, Indira Gandhi Centre for Atomic Research, Homi Bhabha National Institute) ;
  • Puspendu Hazra (Reactor Design and Technology Group, Indira Gandhi Centre for Atomic Research, Homi Bhabha National Institute) ;
  • Nimala Sundaram (Reactor Design and Technology Group, Indira Gandhi Centre for Atomic Research, Homi Bhabha National Institute) ;
  • Subhadip Kirtan (Bharatiya Nabhikiya Vidyut Nigam Limited) ;
  • Nakul Chaudhary (Bharatiya Nabhikiya Vidyut Nigam Limited) ;
  • A. Riyas (Reactor Design and Technology Group, Indira Gandhi Centre for Atomic Research, Homi Bhabha National Institute) ;
  • K. Devan (Reactor Design and Technology Group, Indira Gandhi Centre for Atomic Research, Homi Bhabha National Institute)
  • Received : 2023.03.14
  • Accepted : 2023.06.16
  • Published : 2023.10.25
Download PDF
⟨ Previous Next ⟩

Abstract

The early localization of a fuel subassembly with a failed (wet rupture) fuel pin is very important in reactors to limit the associated radiological and operational consequences. This requires a fast and reliable system for failure detection and their localization in the core. In the Prototype Fast Breeder Reactor, the system specially designed for this purpose is Failed Fuel Location Modules (FFLM) housed in the control plug region. It identifies a failed sub-assembly by detecting the presence of delayed neutrons in the sodium from a failed sub-assembly. During the commissioning phase of PFBR, it is mandatory to demonstrate the FFLM effectiveness. The paper highlights the engineering and physics design aspects of FFLM and the integrated simulation towards its function demonstration with a source assembly containing a perforated metallic fuel pin. This test pin mimics a MOX pin of 1 cm2 of geometrical defect area. At 10% power and 20% sodium flow rate, the counts rate in the BCCs of FFLM system range from 75 cps to 145 cps depending upon the position of DN source assembly. The model developed for the counts simulation is applicable to both metal and MOX pins with proper values of k-factor and escape coefficient.

Keywords

References

  1. H. Plitz, et al., Synthesis Report on the Understanding of Failed LMFBR Fuel Element Performance, KFK-PSB-01.11.05P37B, INIS-DE-PSB-020, IAEA, 1990.
  2. W. Bitter, Localization and handling of failed fuel subassemblies in sodium-cooled fast breeder reactors, Kerntechnik 56 (2) (1991) 114-117, https://doi.org/10.1515/kern-1991-560219.
  3. S. Jacobi, Detection and location of failed fuel elements in LMFBRs-A review, in: Proceedings of an IWGFR Meeting on Fuel Failure Detection and Location in LMFBRs. KfK-3203, IWGFR/38, Karlsruhe, 1982, pp. 23-30.
  4. Shigeharu Ukai, Itaru Shibahara, Yuji Enokido, Yuji Sano, D. John, B. Lambert, James H. Bottcher, Release characterization of delayed neutron precursors from breached FBR fuel element, J. Nucl. Sci. Technol. 26 (10) (1989) 931-938. https://doi.org/10.1080/18811248.1989.9734408
  5. P. Filliatre, C. Jammes, N. Chapoutier, J.P. Jeannot, F. Jadot, R. Batail, D. Verrier, In vessel detection of delayed neutron emitters from clad failure in sodium cooled nuclear reactors: an estimation of the signal, Nucl. Instrum. Methods Phys. Res. 744 (1-10) (2014).
  6. G. Srinivasan, et al., The fast breeder test reactor-design and operating experiences, Nucl. Eng. Des. 236 (2006) 796-811. https://doi.org/10.1016/j.nucengdes.2005.09.024
  7. H. Reichel, Sippingverfahren, BKU/SNR-300, Interatom-Report 61.04293.8, 1987.
  8. D.W. Shannon, W.R. Wykoff, Sodium technology: FFTF fuel failure location, Nucl. Eng. 17 (No. 8) (1972) 2.
  9. Bie Yewang, Huwei Li, Wenbin Xiong, Donghui Zhang, Mingyu Wu, Xinzhe Wang, Discussion of tag gas method using in China experimental fast reactor for failed fuel assembly location, in: 25th International Conference on Nuclear Engineering, 2017. Paper No: ICONE25-67994, V002T03A118.
  10. M.T. Jose, S. Baskar, V. Meenakshisundaram, Estimation of radioactive noble gas activity in FBTR, in: A Simple Method of Calibration of HPGe Detector, Conference: IRPA 12, vol. 3, Buenos Aires, Argentina, 2008.
  11. G.V. S Ashok Kumar, et al., Localisation of the failed fuel subassembly in fast breeder test reactor by the analysis of fission gases in cover gas, J. Radioanal. Nucl. Chem. (2020), https://doi.org/10.1007/s10967-020-07370-8.
  12. R. Vijayashree, et al., Design and Development of Failed Fuel Location Module for Prototype Fast Breeder Reactor, 2014, https://doi.org/10.1115/ICONE22-30913. V001T01A020, proceeding paper, ICONE22-30913.
  13. Abhitab Bachchan, et al., Simulation of delayed neutron precursor release due to wet rupture in a fuel pin and its detection methodology in PFBR, Nucl. Eng. Des. 382 (2021), 111372.
  14. M. Sivaramakrishna, et al., Design and Qualification of I and C of Failed Fuel Location Module for PFBR, DAE-BRNS National Symposium on Nuclear Instrumentation (NSNI-2013), 2013, 19-21 Nov 2013, Mumbai (India).
  15. S. Jacobi, Detection and location of failed fuel elements in LMFBRs-A review, in: Proceedings of an IWGFR Meeting on Fuel Failure Detection and Location in LMFBRs. KfK-3203, IWGFR/38, Karlsruhe, 1982, pp. 23-30.
  16. U.K.A.I. Shigeharu, et al., Release characteristics of delayed neutron precursors from breached FBR fuel element, J. Nucl. Sci. Technol. (1989) 931~938.
  17. R.V. Strain, J.D.B. Lambert, Results of UO2 Diagnostic Tests for Run beyond Cladding Breach in EBR-II, Report No. ANL-78-99, Argonne National Laboratory, Argonne, Illinois, 1979.
  18. J.F. Briesmeister, MCNP - A General Monte Carlo N-Particle Transport Code, Version 4C, Los Alamos, New Mexico, 2000.
  19. Robert Macfarlane, et al., The NJOY Nuclear Data Processing System, Los Alamos National Lab. (LANL), Los Alamos, NM (United States), 2017. Version 2016, Technical report number LA-UR-17-20093.
  20. F.S. Kirn, et al., Fuel failure monitoring system in U.S. breeder reactors, in: Proceedings of IAEA Specialist Meeting on Fuel Failure Detection and Location in LMFBRs, IWGFR-38/KfK-3203, 1982.
  21. P. Dimitriou, et al., Development of a reference database for beta-delayed neutron emission, Nucl. Data Sheets 173 (2021) 144-238. https://doi.org/10.1016/j.nds.2021.04.006
  22. D.A. Brown, et al., ENDF/B-VIII.0: the 8th major release of the nuclear reaction data library with CIELO-project cross sections, new standards and thermal scattering data, Nucl. Data Sheets 148-1 (2018).
  23. G. Srinivasan, et al., Delayed neutron measurements with a natural uranium fission product source in Fast Breeder Test Reactor, Ann. Nucl. Energy 65 (2014) (2013) 314-319. https://doi.org/10.1016/j.anucene.2013.11.015