한국건설관리학회논문집 (Korean Journal of Construction Engineering and Management)

  • 제24권5호
  • /
  • Pages.52-62
  • /
  • 2023
  • /
  • 2005-6095(pISSN)
  • /
  • 2465-9703(eISSN)
한국건설관리학회 (Korea Institute of Construction Engineering and Management)
권호 표지
DOI QR코드

DOI QR Code

슬래브 철근 물량 산출 자동화 알고리즘 개발

Development of an Algorithm for Automatic Quantity Take-off of Slab Rebar

  • 김수환 (경희대학교 건축공학과) ;
  • 김선국 (경희대학교 건축공학과) ;
  • 서상욱 (가천대학교 건축공학과) ;
  • 김상철 (경희대학교 건축공학과)
  • Kim, Suhwan (Department of Architectural Engineering, Kyung-Hee University) ;
  • Kim, Sunkuk (Department of Architectural Engineering, Kyung-Hee University) ;
  • Suh, Sangwook (Dept. Of architectural Engineering Gachon University) ;
  • Kim, Sangchul (Department of Architectural Engineering, Kyung-Hee University)
  • 투고 : 2023.06.18
  • 심사 : 2023.09.21
  • 발행 : 2023.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구의 목적은 정착 길이, 표준 후크 및 이음 길이와 같은 관련 규정을 준수하면서 슬래브 철근의 정확한 절단 길이를 산출하는 자동화된 알고리즘을 제안하는 것이다. 제안된 알고리즘은 일반적으로 외주를 통해 수작업으로 진행하던 기존 철근 물량 산출 프로세스를 개선하는 것을 목표로 한다. 입찰 단계부터 정확한 철근 수량 데이터를 BBS(Bar Bending Schedule) 수준으로 제공함으로써 물량 산출의 불확실성을 제거하고 외부 의존도를 낮출 수 있다. 또한, 알고리즘을 통해 정확한 물량을 조기에 산출하는 경우 건설사는 경쟁력 있고 최적화된 입찰을 미리 준비할 수 있어 계약 협상 시 이익률을 높일 수 있다. 제안된 알고리즘은 견적, 예산, BBS 생성 등 다양한 프로세스에서 중복되는 업무를 간소화할 뿐만 아니라 계약 후 구조 도면 변경에도 유연하게 대처할 수 있다. 특히, 제안된 알고리즘을 BIM과 결합하는 경우 시공 초기 단계에서 BIM을 적용할 때 발생하는 기술적 문제를 해결할 수 있으며, REVIT 기반 패밀리 파일로 구축된 알고리즘의 수식과 형상 코드는 실무에서 상당한 시간과 인력 절감에 기여한다.

The objective of this study is to propose an automated algorithm for precise cutting length of slab rebar complying with regulations such as anchorage length, standard hooks, and lapping length. This algorithm aims to improve the traditional manual quantity take-off process typically outsourced by external contractors. By providing accurate rebar quantity data at BBS(Bar Bending Schedule) level from the bidding phase, uncertainty in quantity take-off can be eliminated and reliance on out-sourcing reduced. In addition, the algorithm allows for early determination of precise quantities, enabling construction firms to preapre competitive and optimized bids, leading to increased profit margins during contract negotiations. The proposed algorithm not only streamlines redundant tasks across various processes, including estimating, budgeting, and BBS generation but also offers flexibility in handling post-contract structural drawing changes. In particular, the proposed algorithm, when combined with BIM, can solve the technical problems of using BIM in the early phases of construction, and the algorithm's formulas and shape codes that built as REVIT-based family files, can help saving time and manpower.

키워드

과제정보

이 성과는 정부(과학기술정보통신부)의 재원으로 한국 연구재단의 지원을 받아 수행된 연구임.(No.2022R1A2C2005276)

참고문헌

  1. Abanda, F.H., Kamsu-Foguem, B., and Tah, J.H.M. (2017a). "Bim - new rules of measurement ontology for construction cost estimation." Engineering Science and Technology, an International Journal, 20(2), pp. 443-459. https://doi.org/10.1016/j.jestch.2017.01.007
  2. Ahn. Y., Song. K., and Heo. J. (2003). "Improving the Accuracy of Screening of Cost Estimating in Early Construction Project Phase." Journal of the Architectural Institute of Korea Structure & Construction, 19(11), pp. 133-140.
  3. British Standard. (2020). BS Shape Codes 2020.
  4. Choi, J., Lee, J., Yoon, H,. Park. J., Hwang, Y., and Kim, D. (1991). "A Study of Automated Quantity Calculation from Design Drawings, I." Construction Technology Information System, (May. 25, 2023).
  5. Ergen, F., and Bettemir, O.H. (2022). "Development of BIM software with quantity take-off and visualization capabilities." Journal of Construction Engineering, Management & Innovation, 5(1), pp. 1-14. https://doi.org/10.31462/jcemi.2022.01001014
  6. Ham, C., Park, J., Park, J., Jeong, J., and Kim, I. (1999). "A Study on the Development of Shop Drawings and Bar-Bending Schedule Automation System for Apartment Housings." Journal of the Korean Institute of Architects, 15(.8), pp. 111-119.
  7. Jeong, K., and Lim, N. (2013). "A basic study on the reduction of loss rate of the reinforcing steel and quantity using of object-oriented cad-based program." Korean Association of Architectural Societies, 15(5), pp. 251-258.
  8. Kim. T., Hong. C., and Kim. S. (2003). "Algorithm for the Reinforced Concrete Framework Materials Take-off." Korean Journal of Construction Engineering and Management, KICEM, 4(1), pp. 114-121.
  9. Kim, S., and Lim, C. (2007). "A Study on the Estimate Cost Model for Concrete Structural Frame Work in the High-Rise Residential-Commercial Complex Building." Architectural Institute Of Korea, 23(7), pp. 151-159.
  10. Kim S., Yoon S., Chin S., and Kim T. (2009). "A Development of Automated Modeling System for Apartment Interior to Improve Productivity of BIM-based Quantity Take-Off." Journal of the Architectural Institute of Korea Structure & Construction, 25(9), pp. 133-143.
  11. Kim, J., Lee, H., Park, M., Kim, H., and Hwang, S. (2010). "A Method for the Development of Rebar Quantity Take-Off (QTO) Efficiency Using BIM." Proceedings of KICEM Annula Conference, KICEM, 13, pp. 375-377.
  12. Kim, C. (2016). "Review the usability rebar quantity take-off function of Reinforcement concrete frame using Builder Hub." Journal of the Korea Concrete Institute, 28(2), pp. 555-556. https://doi.org/10.4334/JKCI.2016.28.5.555
  13. Kim, D., Lim, C., Liu, Y., and Kim, S. (2019). "Automatic estimation system of building frames with integrated structural design information (AutoES)." Iranian Journal of Science and Technology, Transactions of Civil Engineering, 44(4), pp. 1145-1157.
  14. Kim, D., Lim, C., Liu, Y., and Kim, S. (2020). "Automatic Estimation System of Building Frames with Integrated Structural Design Information (AutoES)." Iranian Journal of Science and Technology, Transactions of Civil Engineering, 44(4), pp. 1145-1157. https://doi.org/10.1007/s40996-019-00308-5
  15. Kwon, K. (2023). "A Study on the Development of Optimization Algorithms for Near Zero Rebar Cutting Waste Rate (N0RCW)." Doctoral Dissertation, Kyung Hee university, p. 45.
  16. Lee, J., Kim, J., Kim, Y., Moon, S., and Jeon, Y. (1996). "Research on development of rebar quantity calculation and loss rate optimization system." Proceedings of the Spring Conference of the Korean Institute of Architects (Structural Systems), 16(1), pp. 457-460.
  17. Ministry of Land, Infrastructure, and Transport Technology Innovation Division. (2022). Revisions to the Design Criteria for Concrete Structures (KDS 14 20 00) and Standard Specifications for Concrete Structures (KDS 14 20 00).
  18. Park, H.. Lee, Y., Lee, S., and Kang, T. (2008). "Development of automatic quantity take-off system for reinforcing bars including installation location information." Journal of the Korean Society of Architects and Engineers, 8(2), pp. 63-70.
  19. Park Y., Won S., Han Ch., and Lee J. (2011). "A Study on 3D BIM Collaborative Approximate Estimating Model of Structural Work for Apartment Projects." Journal of the Architectural Institute of Korea Structure & Construction, 27(6), pp. 123-130.
  20. Song, C., Kim, C., Lee, S., and Choi, H. (2016). "Establishment of rebar quantity estimation in BIM-based initial design phase." Journal of the Computational Structural Engineering Institute of Korea, 29(5), pp. 447-454. https://doi.org/10.7734/COSEIK.2016.29.5.447
  21. Sung, S., Lim, C., and Kim, S. (2015). "Basic study about Automatic Rebar Quantity Estimation Integrated with Structural Design Information." The Korea Institute of Building Construction, 15(1), pp. 109-110
  22. Widjaja, D.D., Rachmawati, T.S.N., Kwon, K., and Kim, S. (2023). "Investigating Structural Stability and Constructability of Buildings Relative to the Lap Splice Position of Reinforcing Bars." Journal of the Korea Institute of Building Construction, 23(3), pp. 315-326. https://doi.org/10.5345/JKIBC.2023.23.3.315
  23. Yoon, J., Cho, H., Lee, J., Shin, J., and Kim, E. (2020). "A Comparison of Quantity Take-Offs of RC Structures based on BIM." Journal of the Computational Structural Engineering Institute of Korea, 33(1), pp. 35-44. https://doi.org/10.7734/COSEIK.2020.33.1.35
  24. Yun, S. (2021). "Artificial Intelligence based Conceptual Cost Estimation at Schematic Design Stage." Journal of the Architectural Institute of Korea, 41(2), pp. 717-717.