한국건설관리학회논문집 (Korean Journal of Construction Engineering and Management)

  • 제24권5호
  • /
  • Pages.63-72
  • /
  • 2023
  • /
  • 2005-6095(pISSN)
  • /
  • 2465-9703(eISSN)
한국건설관리학회 (Korea Institute of Construction Engineering and Management)
권호 표지
DOI QR코드

DOI QR Code

Job Training and Safety Education for Modular Construction using Virtual Reality

  • Choi, Hyeongho (Department of Architecture and Architectural Engineering, Yonsei University) ;
  • Chae, Jeonghyeun (Department of Architecture and Architectural Engineering, Yonsei University) ;
  • Kang, Youngcheol (Department of Architecture and Architectural Engineering, Yonsei University)
  • 투고 : 2023.03.08
  • 심사 : 2023.08.02
  • 발행 : 2023.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study investigates the virtual reality (VR) simulation to train construction workers for modular construction. Recently, the construction industry has been experiencing a growing demand for modular construction due to a shortage of labors and an increasing social need for safety. While the demand for modular construction has been increasing, construction labors suffer a basic knowledge regarding modular construction. The users of the simulation, developed by Unity program and Oculus Quest 2, experience the removal of hazardous elements at the location whether the modular unit suspended by a crane is lowered, the lowering and assembly of units through crane operation, and the fall from the roof which is the most frequent accidents in modular construction. The simulation was tested by 15 subjects. The effectiveness of the education was measured through a survey on self-efficacy, perceived usefulness, usability, and presence. It was found that the VR training is suitable for educating on the modular construction activities and safety issues related to them. This study also found that perceived usefulness is the factor that has the greatest impact on self-efficacy. This study can contribute to resolving the labor education issues for the deployment of modular construction.

키워드

과제정보

This research was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (NRF-2021R1F1A1050519).

참고문헌

  1. Adami, P., Rodrigues, P.B., Woods, P.J., Becerik-Gerber, B., Soibelman, L., Copur-Gencturk, Y., and Lucas, G. (2021). "Effectiveness of VR-based training on improving construction workers' knowledge, skills, and safety behavior in robotic teleoperation." Advanced Engineering Informatics, 50, 101431. 
  2. AGC (Associated General Contractors of America) (2018). Eighty percent of contractor's report difficulty finding qualified craft workers to hire as association calls for meausres to rebuid workforce. Accessed May 24, 2023. https://www.agc.org/news/2018/08/29/eighty-percent-contractors-report-difficulty-finding-qualified-craft-workers-hire. 
  3. An, S., and Lee, Jung. (2018). Study for the presence and the interaction in the VR solar system education contents. pp. 903-906. HCI KOREA. 
  4. An, S.B. (2020). A Development of Education and Training Contents for Chemical Incident Response Based on Virtual Reality, Department of Chemical Engineering Graduate School Chonnam National University. 
  5. Bigne, E., Llinares, C., and Torrecilla, C. (2016). "Elapsed time on first buying triggers brand choices within a category: A virtual reality-based study." Journal of Business Research, 69, pp. 1423-1427.  https://doi.org/10.1016/j.jbusres.2015.10.119
  6. Chae, S.W., and Oh, K.R. (2019). Analysis of the Relationships among Fun, Satisfaction, Educational Effectiveness and Continuous Participation Intention in the Physical Activities Class based on VR, Department of Sports Application Industry Studies Graduate School of Yonsei University. 
  7. Choi, J.O., Chen, X.B., and Kim, T.W. (2019). "Opportunities and challenges of modular methods in dense urban environment." International Journal of Construction Management, 19, pp. 93-105.  https://doi.org/10.1080/15623599.2017.1382093
  8. Compeau, D.R., and Higgins, C.A. (1995). "Computer Self-Efficacy: Development of a Measure and Initial Test." MIS Quarterly, 19, pp. 189-211.  https://doi.org/10.2307/249688
  9. Davis, F.D. (1985). A technology acceptance model for empirically testing new end-user information systems: Theory and results, Massachusetts Institute of Technology. 
  10. Davis, F.D. (1989). "Perceived Usefulness, Perceived Ease of Use, and User Acceptance of Information Technology." MIS Quarterly, 13, pp. 319-340.  https://doi.org/10.2307/249008
  11. Dombrowski, M., Smith, P.A., Manero, A., and Sparkman, J. (2019). "Designing inclusive virtual reality experiences." In International Conference on Human-Computer Interaction Springer, pp. 33-43. 
  12. Francis, E.R., Bernard, S., Nowak, M.L., Daniel, S., and Bernard J.A. (2020). "Operating room virtual reality immersion improves self-efficacy amongst preclinical physician assistant students." Journal of Surgical Education, 77(4). pp. 947-952.  https://doi.org/10.1016/j.jsurg.2020.02.013
  13. Ferdous, W., Bai, Y., Ngo, T.D., Manalo, A., and Mendis, P. (2019). "New advancements, challenges and opportunities of multi-storey modular buildings - A state-of-the-art review." Engineering Structures, 183, pp. 883-893.  https://doi.org/10.1016/j.engstruct.2019.01.061
  14. Huang, W., and Roscoe, R.D. (2021). "Head-mounted display-based virtual reality systems in engineering education: A review of recent research." Computer Applications in Engineering Education, 29, pp. 1420-1435.  https://doi.org/10.1002/cae.22393
  15. Jensen, L., and Konradsen, F. (2018). "A review of the use of virtual reality head-mounted displays in education and training." Education and Information Technologies, 23, pp. 1515-1529.  https://doi.org/10.1007/s10639-017-9676-0
  16. Jeong, G., Kim, H., Lee, H.S., Park, M., and Hyun, H. (2022). "Analysis of safety risk factors of modular construction to identify accident trends." Journal of Asian Architecture and Building Engineering, 21, pp. 1040-1052.  https://doi.org/10.1080/13467581.2021.1877141
  17. Jeong, G., Lee, H.S., Park, M.S., Hyun, H.S., and Kim, H.S. (2019). "Cause Analysis and Reduction of Safety Accident in Modular Construction - Focusing on Manufacturing and Construction Process." Journal of the Architectural Institute of Korea Structure & Construction, 35(8), pp. 157-168. 
  18. Jeong, H.J. (2020). Activation plan to applicate modular system of small-scale public office based on case study approach, Department of Architecture The Graduate School Hanyang University, Seoul. 
  19. Jin, S.A.A., and Park, N. (2009). "Parasocial interaction with my avatar: effects of interdependent self-construal and the mediating role of self-presence in an avatar-based console game, Wii." Cyberpsychology & behavior : the impact of the Internet, multimedia and virtual reality on behavior and society, 12, pp. 723-727.  https://doi.org/10.1089/cpb.2008.0289
  20. Juliano, J.M., and Liew, S.L. (2020). "Transfer of motor skill between virtual reality viewed using a head-mounted display and conventional screen environments." Journal of NeuroEngineering and Rehabilitation, 17, p. 48. 
  21. Jun, Y., Kim, K., and Jeon, E (2021). "Proposal of a Classification System of Checklists for Safety Management of On-Site Workers in Modular Construction." Korean Journal of Construction Engineering and Management, KICEM, 22(6), pp. 120-130.  https://doi.org/10.6106/KJCEM.2021.22.6.120
  22. Jun, Y.H., Kim, K.T., and Jeon, E.B. (2021). "Risk Analysis of Lifting Work for Risk Assessment of Modular Construction.". Journal of Academic Presentation Conference of the Korean Society of Architectural Engineering, 21, pp. 291-292. 
  23. Kang, Y., Siddiqui, S., Suk, S.J., Chi, S., and Kim, C. (2017). "Trends of fall accidents in the US construction industry." Journal of Construction Engineering and Management, 143, 04017043. 
  24. Kim, S., Chang, S., and Castro-Lacouture, D. (2020). "Dynamic Modeling for Analyzing Impacts of Skilled Labor Shortage on Construction Project Management." Journal of Management in Engineering, 36, 04019035. 
  25. KOSHA (2016). Technical Specification for Root Cause Analysis. KOSHA GUIDE P-151-2016. KOSHA. 
  26. Lach, E., Benek, I., Zalewski, K., Skurowski, P., Kocur, A., Kotula, A., Macura, M., Pamula, Z., Stankiewicz, M., and Wyrobek, T. (2019). "Immersive virtual reality for assisting in inclusive architectural design." Man-Machine Interactions, 6, pp. 23-33. 
  27. Lan, Y.J. (2020). Chapter One - Immersion into virtual reality for language learning. In "Psychology of Learning and Motivation" (K.D. Federmeier and H.W. Huang, eds.), Academic Press, 72, pp. 1-26. 
  28. Le, (2016). An Experiential and Interactive Education System for Construction Safety Utilizing Virtual and Augmented Reality, The Graduate School Chung-Ang University, Seoul. 
  29. Lee, S.S., Bae, K.W., Park, K.S. (2016). "Comparison of Behavior of Connections between Modular Units according to Shape of Connector Plates." Journal of Korean Society of Steel Construction, 28, pp. 467-476.  https://doi.org/10.7781/kjoss.2016.28.6.467
  30. Lee, J.S., and Kim, Y.S. (2017). "Analysis of cost-increasing risk factors in modular construction in Korea using FMEA." KSCE Journal of Civil Engineering, 21, pp. 1999-2010.  https://doi.org/10.1007/s12205-016-0194-1
  31. Leong, A., Herst, P., and Kane, P. (2018). "VERT, a virtual clinical environment, enhances understanding of radiation therapy planning concepts." Journal of Medical Radiation Sciences, 65, pp. 97-105.  https://doi.org/10.1002/jmrs.272
  32. Lette, A., Ambelu, A., Getahun, T., and Mekonen, S. (2018). "A survey of work-related injuries among building construction workers in southwestern Ethiopia." International Journal of Industrial Ergonomics, 68, pp. 57-64.  https://doi.org/10.1016/j.ergon.2018.06.010
  33. Liu, R., Wang, L., Lei, J., Wang, Q., and Ren, Y. (2020). "Effects of an immersive virtual reality-based classroom on students' learning performance in science lessons." British Journal of Educational Technology, 51, pp. 2034-2049.  https://doi.org/10.1111/bjet.13028
  34. Manis, K.T., and Choi, D. (2019). "The virtual reality hardware acceptance model (VR-HAM): Extending and individuating the technology acceptance model (TAM) for virtual reality hardware." Journal of Business Research, 100, pp. 503-513.  https://doi.org/10.1016/j.jbusres.2018.10.021
  35. Mazuryk, T., and Gervautz, M. (1996). Virtual reality-history, applications, technology and future.
  36. Miller, J., and Khera, O. (2010). "Digital Library Adoption and the Technology Acceptance Model: A Cross-Country Analysis." THE Lectronic Journal of Information Systems in Developing Countries, 40(1), pp. 1-19.  https://doi.org/10.1002/j.1681-4835.2010.tb00288.x
  37. Nahmens, I., and Ikuma, L.H. (2012). "Effects of Lean Construction on Sustainability of Modular Homebuilding." Journal of Architectural Engineering, 18, pp. 155-163.  https://doi.org/10.1061/(ASCE)AE.1943-5568.0000054
  38. Naomi Javanifard, D.M., Kristen, Strobel and Jason, Yap (2013). Modular Prefabricated Residential Construction Constraints and Opportunities. PNCCRE Technical Report. 
  39. Nissim, Y., and Weissblueth, E. (2017). "Virtual reality (VR) as a source for self-efficacy in teacher training." International Education Studies, 10(8). pp. 52-59.  https://doi.org/10.5539/ies.v10n8p52
  40. Oh (2021). Awareness of the application of Industrial VR Contents in Occupational Safety Education in Vocational High Schools: Focused on the Construction Department. 
  41. Paszkiewicz, A., Salach, M., Strzalka, D., Budzik, G., Nikodem, A., Wojcik, H., and Witek, M. (2022). "VR Education Support System-A Case Study of Digital Circuits Design." Energies, 15, p. 277. 
  42. Razkenari, M., Fenner, A., Shojaei, A., Hakim, H., and Kibert, C. (2020). "Perceptions of offsite construction in the United States: An investigation of current practices." Journal of Building Engineering, 29, 101138. 
  43. Rogers, E.M. (2010). Diffusion of innovations, Simon and Schuster. 
  44. Scherer, R., Siddiq, F., and Tondeur, J. (2019). "The technology acceptance model (TAM): A meta-analytic structural equation modeling approach to explaining teachers' adoption of digital technology in education." Computers & Education, 128, pp. 13-35.  https://doi.org/10.1016/j.compedu.2018.09.009
  45. Shahbazi, B., Akbarnezhad, A., Rey, D., Fini, A.A.F., and Loosemore, M. (2019). "Optimization of Job Allocation in Construction Organizations to Maximize Workers' Career Development Opportunities." Journal of Construction Engineering and Management, 145(6). 04019036. 
  46. Shin, J., Moon, S., Cho, B.H., Hwang, S., and Choi, B. (2022). "Extended technology acceptance model to explain the mechanism of modular construction adoption." Journal of Cleaner Production, 342, 130963. 
  47. Smith, R.E. (2011). Prefab Architecture: A guide to modular design and construction. John Wiley & Sons, Inc. 
  48. Sokas, R.K., Dong, X.S., and Cain, C.T. (2019). "Building a Sustainable Construction Workforce." International Journal of Environmental Research and Public Health, 16, 4202. 
  49. Song, H., Kim, T., Kim, J., Ahn, D., and Kang, Y. (2021). "Effectiveness of VR crane training with head-mounted display: Double mediation of presence and perceived usefulness." Automation in Construction, 122, 103506. 
  50. Southern, J. (2016). Smart construction: How offsite manufacturing can transform our industry. KPMG Technical Report. 
  51. Widaningsih, L., Hamdani, A., Krisnanto, E., Susanti, I., and Kusuma, Y. (2020). "Skilled construction workers in the construction industry: Workers certification dilemma?" IOP Conference Series: Materials Science and Engineering, 830, 042071. 
  52. Windapo, A.O. (2016). "Skilled labour supply in the South African construction industry: The nexus between certification, quality of work output and shortages." SA Journal of Human Resource Management, 14(1), pp. 1-8.  https://doi.org/10.4102/sajhrm.v14i1.750
  53. Wohlgenannt, I., Simons, A., and Stieglitz, S. (2020). "Virtual Reality." Business & Information Systems Engineering, 62, pp. 455-461.  https://doi.org/10.1007/s12599-020-00658-9
  54. Zywicki, K., Zawadzki, P., and Gorski, F. (2017). "Virtual reality production training system in the scope of intelligent factory." Intelligent Systems in Production Engineering and Maintenance - ISPEM 2017, 637, pp. 450-458.