DOI QR코드

DOI QR Code

수소 정제 시스템의 건조 타워 열전달 해석을 위한 응용 프로그램 코드 개발

Development of an Application Program Code for Dryer Tower of Heat Transfer Analysis in Hydrogen Purification System

  • SOOIN KWON (School of Mechanical Engineering, Pusan National University) ;
  • BYUNGSEOK JIN (Sunbo Unitech R&D Center) ;
  • GYUNGMIN CHOI (School of Mechanical Engineering, Pusan National University)
  • 투고 : 2023.06.13
  • 심사 : 2023.08.07
  • 발행 : 2023.08.30

초록

The purity of hydrogen finally purified in the hydrogen purification process system is greatly influenced by the uniformity of the purification temperature of the dry tower. A in-house code that can be easily used by field designers has been developed to predict the capacity of the appropriate heat source and the time to reach the temperature of the dry tower. A code was developed to predict unsteady heat transfer using Visual Basic for Applications. To verify the developed code, a grid independence test was performed, and finally, calculations were performed for two cases. In the first case, the time for the temperature of the heater jacket to reach 360℃ was about 1,400 seconds when the supply heat source was 1,000 W. And in the second case, the time for the temperature of the heater jacket to reach 360℃ was about 710 seconds when the supply heat source was 2,000 W. It was confirmed that the developed code well describes the actual test data of the regeneration process of adsorption and desorption, and it is judged that the code developed in the design process of various capacity systems will be effectively applied to the heat capacity calculation in the future.

키워드

과제정보

본 논문은 산업통상자원부(MOTIE)의 재원 지원의 연구 실적입니다(20223030040050).

참고문헌

  1. N. K. Oh, "R&D trends for green catalytic technology developments", Journal of the Korea Academia-Industrial cooperation Society, Vol. 15, No. 11, 2014, pp. 6518-6526, doi: https://doi.org/10.5762/KAIS.2014.15.11.6518.
  2. J. Lee, S. Lee, J. Moon, D. Choi, and C. Lee, "Design of adsorption bed for Compact H2 PSA process", New & Renewable Energy, Vol. 2, No. 2, 2006, pp. 60-67. Retrieved from https://kiss.kstudy.com/Detail/Ar?key=3823258.
  3. J. Kim, "Air pollutant reduction effect on road mobility in hydrogen economy era", Journal of Hydrogen and New Energy, Vol. 31, No. 6, 2020, pp. 522-529, doi: https://doi.org/10.7316/KHNES.2020.31.6.522.
  4. S. Hwang and J. N. Park, "Techno-economic analysis of water electrolysis system connected with photovoltaic power generation", Journal of Hydrogen and New Energy, Vol. 32, No. 6, 2021, pp. 477-482, doi: https://doi.org/10.7316/KHNES.2021.32.6.477.
  5. C. S. Lee, S. C. Lee, J. H. Lee, M. J. Kim, H. S. Jo, S. G. Kim, and W. C. Jo, "Development trend of PEM water electrolysis cathode supported catalyst for green hydrogen production", Electrical & Electronic Materials, Vol. 34, No. 6, 2021, pp. 32-41. Retrieved from http://koreascience.or.kr/article/JAKO202101463236866.page. 101463236866.page
  6. O. K. Oh, "The Adsorption-desorption characteristics of VOC on activated carbon by thermal swing adsorption (TSA) process [Master's thesis]", Seoul: Yonsei University; 2000, pp. 1-2.
  7. A. Aleghafouri and M. Davoudi, "Modeling and simulation of a pressure-temperature swing adsorption process for dehydration of natural gas", Adsorption, Vol. 24, No. 1, 2018, pp. 121-133, doi: https://doi.org/10.1007/s10450-017-9924-z.
  8. B. Ambrozek, J. Nastaj, and E. Gabrus, "Modeling and experimental studies of adsorptive dewatering of selected aliphatic alcohols in temperature swing adsorption system", Drying Technology, Vol. 31, No. 15, 2013, pp. 1780-1789, doi: https://doi.org/10.1080/07373937.2013.823442.
  9. H. E. Park, "Bio-isobutanol catalyzed conversion and isobutylene separate purification technology through TSA process [Master's thesis]", Seoul: Hanyang University, 2017, pp. 1-9.
  10. National Institute of Standards and Technology (NIST), "NIST Standard Reference Database Number 69", NIST, 2023, doi: https://doi.org/10.18434/T4D303.