Acknowledgement
본 논문은 에너지기술평가원(KETEP)의 "표층처분시설의 공학적 방벽 장기성능 검증 기술 개발" 과제(과제번호:20193210100130)의 일환으로 수행되었습니다.
References
- International Atomic Energy Agency. 2014. Near surface disposal facilities for radioactive waste. IAEA Specific safety Guide, No. SSG-29, International Atomic Energy Agency, pp. 51-56.
- International Atomic Energy Agency. 2001. Technical Considerations in the Design of Near Surface Disposal Facilities for Radioactive Waste. IAEA-TECDOC-1256, International Atomic Energy Agency, pp. 20-26.
- Jacques D, Leterme B, Beerten K, Schneider S, Finke P and Mallants D. 2010. Long-term evolution of the multi-layer cover. NIROND-TR 2010-03E, ONDRAF/NIRAS, pp. 13-19.
- Jeong J, Kwon M and Park E. 2018. Safety Assessment of Near Surface Disposal Facility for Low-and Intermediate-Level Radioactive Waste(LILW) through Multiphase-Fluid Simulations Based on Various Scenarios. Econ. Environ. Geol. 51(2):131-147. https://doi.org/10.9719/EEG.2018.51.2.131.
- Ha J, Lee J and Yoon J. 2017. Simulation of Unsaturated Fluid Flow on the 2nd Phase Facility at the Wolsong LILW Disposal Center. J. Nucl. Fuel Cycle And Waste Technol. 15(3):219-230. https://doi.org/10.7733/jnfcwt.2017.15.3.219.
- Jeong MS, Yi J, Ahn J and Jun S. 2021. Development of Monitoring System based on Cyber Physical System for Long-Term Performance Assessment of Near Surface Disposal Facility. Joint Fall Meeting of Korean Geological Societies, pp. 335-335.
- Korea Radioactive Waste Agency. 2016. Low- and Intermediate level Radioactive waste 2nd repository Safety Analysis Report. 1st ed. Korea Radioactive Waste Agency.
- Bhatt RN and Porro I. 1998. Evaluation of engineered barriers at the Idaho National Engineering and Environmental Laboratory, INEEL/CON-97-00968, Idaho National Engineering and Environmental Lab.
- Cartwright K, Larson TH, Herzog BL, Johnson TM, Albrecht KA, Moffett DL and Stohr CJ. 1987. A study of trench covers to minimize infiltration at waste disposal sites, NUREG/CR-2478-VOL. 3, Illinois State Geological Survey.
- International Atomic Energy Agency. 2001. Technical Considerations in the Design of Near Surface Disposal Facilities for Radioactive Waste. IAEA-TECDOC-1256, International Atomic Energy Agency, pp. 8-18.
- US EPA. 1989. Technical Design Guidance Document: Final Covers on Hazardous Waste Landfills and Surface Impoundments, EPA-530-SW-89-047, US EPA, pp. 33-34.
- Kwon MJ, Kang HG and Cho CH. 2021. Study on Rainfall Infilration into Vault of Near-surface Disposal Facility based on Various Disposal Scenarios. J. Nucl. Fuel Cycle And Waste Technol. 19(4):503-515. https://doi.org/10.7733/jnfcwt.2021.042.
- Rhee CG, Lee EY, Park SM, Kim CL and Yeom YS. 2001. A Conceptual Design on Performance Test Facility of Disposal Cover for the Near Surface Disposal of Low and Intermediate Level Radioactive Waste. J. Eng. Geol. 11(3):245-254. https://scienceon. kisti.re.kr/commons/util/originalView.do?cn=JAKO200111920895872&oCn=JAKO200111920895872&dbt=JAKO&journal=NJOU00291704.
- Chang KM, Park JW, Yoon JH, Park HJ and Kim CL. 2000. Water Balance Evaluation of Final Closure Cover for Near- surface Radioactive Wastes Disposal Facility. Nucl. Eng. Technol. 32(3):274-282. https://koreascience.kr/article/JAKO200011921633548.
- INTERGRATE Maxim. 2008. DS18B20 Programmable Resolution 1-Wire Digital Thermometer, Manual Documents, INTERGRATE Maxim.
- KORINS. 2011. 2010/2011 Catalog (DAVIS-KORINS) meteorlogical measuring instruments, Manual Documents, KORINS: 235-236.
- Physical Acoustic Corporation, R6α Sensor General Purpose, 60 kHz Resonant Frequency Acoustic Emission Sensor, Manual Documents, Physical Acoustic Corporation.
- Nam JW. 2015. Experimental Study on Temperature-Moisture Combined Measurement System for Slope Failure Monitoring. J. Korea Inst. Struct. Maint. Insp. 19(2):33-39. https://doi.org/10.11112/jksmi.2015.19.2.033.
- Kim YH, Park HJ, Jeong J, Park EG, Gwon GJ, Kwon MJ and Park CH. 2020. Development of Probabilistic Estimation System for Long-term Performance Verification of Multilayer Covers in Nearsurface LILW Disposal Facility,Korean Engineering Geology Society, Proceding of the Geological Society of Korea, pp. 253-253.