Geomechanics and Engineering

  • 제34권4호
  • /
  • Pages.449-459
  • /
  • 2023
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Physio-mechanical and X-ray CT characterization of bentonite as sealing material in geological radioactive waste disposal

  • Melvin B. Diaz (Department of Energy and Resources Engineering, Korea Maritime and Ocean University) ;
  • Sang Seob Kim (Department of Energy and Resources Engineering, Korea Maritime and Ocean University) ;
  • Gyung Won Lee (Department of Energy and Resources Engineering, Korea Maritime and Ocean University) ;
  • Kwang Yeom Kim (Department of Energy and Resources Engineering, Korea Maritime and Ocean University) ;
  • Changsoo Lee (Radioactive Waste Disposal Research Division, Korea Atomic Energy Research Institute) ;
  • Jin-Seop Kim (Radioactive Waste Disposal Research Division, Korea Atomic Energy Research Institute) ;
  • Minseop Kim (Radioactive Waste Disposal Research Division, Korea Atomic Energy Research Institute)
  • 투고 : 2022.10.13
  • 심사 : 2023.07.19
  • 발행 : 2023.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

The design and development of underground nuclear waste repositories should cover the performance evaluation of the different components such as the construction materials because the long term stability will depend on their response to the surrounding conditions. In South Korea, Gyeonju bentonite has been proposed as a candidate to be used as buffer and backfilling material, especially in the form of blocks to speed up the construction process. In this study, various cylindrical samples were prepared with different dry density and water content, and their physical and mechanical properties were analyzed and correlated with X-ray CT observations. The main objective was to characterize the samples and establish correlations for non-destructive estimation of physical and mechanical properties through the utilization of X-ray CT images. The results showed that the Uniaxial Compression Strength and the P-wave velocity have an increasing relationship with the dry density. Also, a higher water content increased the values of the measure parameters, especially for the P-wave velocity. The X-ray CT analysis indicated a clear relation between the mean CT value and the dry density, Uniaxial Compression Strength, and P-wave velocity. The effect of the higher water content was also captured by the mean CT value. Also, the relationship between the mean CT value and the dry density was used to plot CT dry densities using CT images only. Moreover, the histograms also provided information about the samples heterogeneity through the histograms' full width at half maximum values. Finally, the particle size and heterogeneity were also analyzed using the Madogram function. This function identified small particles in uniform samples and large particles in some samples as a result of poor mixing during preparation. Also, the μmax value correlated with the heterogeneity, and higher values represented samples with larger ranges of CT values or particle densities. These image-based tools have been shown to be useful on the non-destructive characterization of bentonite samples, and the establishment of correlations to obtain physical and mechanical parameters solely from CT images.

키워드

과제정보

This work was supported by the Institute for Korea Spent Nuclear Fuel (iKSNF) and National Research Foundation of Korea (NRF) grant funded by the Korea government (Ministry of Science and ICT, MSIT)(No. 2021M2E1A1085197 & No. 2021R1A2C2011634).

참고문헌

  1. Chen, Y.G., Liu, L.N., Ye, W.M., Cui, Y.J. and Wu, D.B. (2019), "Deterioration of swelling pressure of compacted Gaomiaozi bentonite induced by heat combined with hyperalkaline conditions", Soils Found., 59(6), 2254-2264. https://doi.org/10.1016/j.sandf.2019.12.008.
  2. Chen, Y.G., Cai, Y.Q., Pan, K., Ye, W.M. and Wang, Q. (2022), "Influence of dry density and water salinity on the swelling pressure and hydraulic conductivity of compacted GMZ01 bentonite-sand mixtures", Acta Geotechnica, 17(5), 1879-1896. https://doi.org/10.1007/s11440-021-01305-7.
  3. Corkhill, C. and Hyatt, N. (2018), Nuclear Waste Management, IOP Publishing, Bristol, England.
  4. Ewing, R.C., Whittleston, R.A. and Yardley, B.W., (2016), "Geological disposal of nuclear waste: a primer", Elements, 12(4), 233-237. https://doi.org/10.2113/gselements.12.4.233.
  5. Ha, S.J., Jeong, Y.J. and Yun, T.S., (2020), "Parameterization of the representative sizes of microstructural features in rocks using 3D X-ray computed tomographic images", Comput. Geosci., 144, 104590. https://doi.org/10.1016/j.cageo.2020.104590.
  6. Kale, R.C. and Ravi, K. (2018), "Influence of thermal loading on index and physicochemical properties of Barmer bentonite", Appl. Clay Sci., 165, 22-39. https://doi.org/10.1016/j.clay.2018.07.039.
  7. Kim, J.S., Yoon, S., Cho, W.J., Choi, Y.C. and Kim, G.Y. (2018), "A Study on the Manufacturing Characteristics and Field Applicability of Engineering-scale Bentonite Buffer Block in a High-level Nuclear Waste Repository", Journal of Nuclear Fuel Cycle and Waste Technology, 16(1), pp.123-136. (In Korean). https://doi.org/10.7733/jnfcwt.2018.16.1.123.
  8. Kiviranta, L. and Kumpulainen, S. (2011), "Quality control and characterization of bentonite materials", Research Reprot No. POSIVA-WR--11-84; Posiva Oy, Helsinki, Finland.
  9. Lee, J.H., Lee, M.S., Choi, H.J. and Choi, J.W. (2010), "Temperature effect on the swelling pressure of a domestic compacted bentonite buffer", J. Nuclear Fuel Cycle Waste Tech., 8(3), 207-213. (In Korean). https://jnfcwt.or.kr/journal/viewPDF.php?key=escce64/Lcc=.
  10. Lee, C., Yoon, S., Cho, W.J., Jo, Y., Lee, S., Jeon, S. and Kim, G.Y., (2019), "Study on thermal, hydraulic, and mechanical properties of KURT granite and Gyeongju bentonite", Special issue on In-DEBS in KURT, J. of Nuclear Fuel Cycle and Waste Tech, 17, 65-80. (In Korean). https://doi.org/10.7733/jnfcwt.2019.17.S.65.
  11. Liu, Z.R., Ye, W.M., Cui, Y.J., Zhu, H.H., Wang, Q. and Chen, Y.G., (2021), "Development of swelling pressure for pellet mixture and compacted block of GMZ bentonite", Constr. Build. Mater., 301, 124080. https://doi.org/10.1016/j.conbuildmat.2021.124080.
  12. Nasir, O., Nguyen, T.S., Barnichon, J.D. and Millard, A. (2017), "Simulation of hydromechanical behaviour of bentonite seals for containment of radioactive wastes", Can. Geotech. J., 54(8), 1055-1070. https://doi.org/10.1139/cgj-2016-0102.
  13. Park, S., Yoon, S., Kwon, S., Lee, M.S. and Kim, G.Y., (2021), "Temperature effect on the thermal and hydraulic conductivity of Korean bentonite buffer material", Progress Nuclear Energy, 137, 103759. https://doi.org/10.1016/j.pnucene.2021.103759.
  14. Rutqvist, J. (2020), "Thermal management associated with geologic disposal of large spent nuclear fuel canisters in tunnels with thermally engineered backfill", Tunn. Undergr Sp. Tech., 102, 103454. https://doi.org/10.1016/j.tust.2020.103454.
  15. Tan, Y., Zhang, H., Zhang, T., Zhang, G., He, D. and Ding, Z. (2021), "Anisotropic hydro-mechanical behavior of full-scale compacted bentonite-sand blocks", Eng. Geol., 287, 106093. https://doi.org/10.1016/j.enggeo.2021.106093.
  16. Villar, M.V., Iglesias, R.J., Gutierrez-Alvarez, C. and Carbonell, B., (2018), "Hydraulic and mechanical properties of compacted bentonite after 18 years in barrier conditions", Appl. Clay Sci., 160, 49-57. https://doi.org/10.1016/j.clay.2017.12.045.
  17. Villar, M.V., Iglesias, R.J., Garcia-Sineriz, J.L., Lloret, A. and Huertas, F. (2020), "Physical evolution of a bentonite buffer during 18 years of heating and hydration", Eng. Geol., 264, 105408. https://doi.org/10.1016/j.enggeo.2019.105408.
  18. Wang, J., Chen, L., Su, R. and Zhao, X. (2018), "The Beishan underground research laboratory for geological disposal of high-level radioactive waste in China: planning, site selection, site characterization and in situ tests", J. Rock Mech. Geotech. Eng., 10(3), 411-435. https://doi.org/10.1016/j.jrmge.2018.03.002.
  19. Wang, Q., Su, W., Ye, W., Zhang, Y. and Chen, Y. (2021), "Analysing the volume change behaviour of compacted bentonites upon THM processes based on the framework of BExM model", Environ. Earth Sci., 80(18), 1-12. https://doi.org/10.1007/s12665-021-09885-z.
  20. Xu, L., Ye, W.M., Chen, B., Chen, Y.G. and Cui, Y.J. (2016), "Experimental investigations on thermo-hydro-mechanical properties of compacted GMZ01 bentonite-sand mixture using as buffer materials", Eng. Geol., 213, 46-54. https://doi.org/10.1016/j.enggeo.2016.08.015.
  21. Yoo, M., Choi, H.J., Lee, M.S. and Lee, S.Y. (2016), "Measurement of properties of domestic bentonite for a buffer of an HLW repository", J. Nuclear Fuel Cycle Waste Tech., 14(2), 135-147. (In Korean). https://doi.org/10.7733/jnfcwt.2016.14.2.135.
  22. Yoon, S., Cho, W., Lee, C. and Kim, G. (2018), "Thermal conductivity investigation of Korean bentonite buffer materials", Proceedings of the Korean Radioactive Waste Society Conference, Busan, Republic of Korea, May.
  23. Yoon, S., Kim, M.S., Kim, G.Y. and Lee, S.R., (2021), "Contemplation of relative hydraulic conductivity for compacted bentonite in a high-level radioactive waste repository", Annal. Nuclear Energy, 161, 108439. https://doi.org/10.1016/j.anucene.2021.108439.
  24. Zeng, Z., Cui, Y.J. and Talandier, J., (2021), "Long-term effect of water chemistry on the swelling pressure and hydraulic conductivity of compacted claystone/bentonite mixture with technological gaps", Eng. Geol., 295, 106432. https://doi.org/10.1016/j.enggeo.2021.106432.