과제정보
본 연구는 한국생산기술연구원 및 산업통상자원부의 소재부품산업기술개발기반구축사업의 '글로벌 시장진출을 위한 차세대 자동차용 R100㎛, Ra20nm급 디지털 라이트닝 초미세 Light Guide 모듈 금형성형기술 개발(KM230100, 20019131)'과제의 지원을 받아 수행되었다.
참고문헌
- Lee, D.W., Lee, S.K. , "An Analysis of the Technology Market for Development of LED Head lamps for Vehicles",Korea Institute of Science and Technology Information, pp.5-47, 2013
- Hwang, S.K., Lee, J.H. and Ryu, S.H.,"A Study on Tool Wear Surface Roughness Characteristics in Milling of AISI P20 mold steel with BN", Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 420-426, 2018 http://doi.org/10.17958/ksmt.20.4.201808.420
- Jung, S.-T., Song, K., Choi, Y.J., et al., "Research on ultra-precision fine-pattern machining through single crystaldiamond tool fabrication technology", Korea Society of Die & Mould Engineering, Vol. 14, No. 3, pp. 63-70, 2020 http://doi.org/10.22847/ksdme.14.3.202009.010
- Rhie, Y.S. and Lee, D.J., "Deremination of the cutting condition and prediction of the surface roughness when turning die steel (STD11) with ceramic tool", Korean Society of Mechanical Technology, Vol. 14, No. 4, pp. 11-17, 2012 http://doi.org/10.17958/ksmt.14.4.201208.11
- Hong, K. P., Song, K. H., Lee, I. C., et al., "A Study on The Optimization of Plastic Mold Steel Machining Using MQL Supply System", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp.7-14, 2017 https://doi.org/10.14775/ksmpe.2017.16.6.007
- Sim, M.S., Kim, D.H. and Lee, C.M., "The Effect of Surface Roughness according to Machining Conditions of Test Specimen for Precision Micro-milling Machining", Journal of the Korean Society for Precision Engineering, Vol. 32, No.1, pp. 49-55, 2015 https://doi.org/10.7736/KSPE.2015.32.1.49
- Choi, T.K., Kim, J.S., Park, J.H., et al., "The cutting temperature characteristics depending on cutting conditions in turning of Al6061-T6", Proceedings of KSMTE 2010 autumn conference, Korean Society of Manufacturing Technology Engineers, pp. 238-240, 2010
- Lee, S.Y. and Kim, H.N., "Effects of Cutting Conditions on Surface Roughness in Turning", Journal of the Korean Society for Precision Engineering, Vol. 18, No.8, pp. 139-149, 2001
- Jeong, J., Kwon, H., Koo, J., Kim, P. and J. Kim, "A Study on Machinability Evaluation of Inconel 718 in Flat End Milling", Journal of The Korean Society of Manufacturing Technology Engineers, Vol. 21, No. 6, pp. 982-987, 2012 http://doi.org/10.7735/ksmte.2012.21.6.982
- Cho, C.Y. and Ryu, S.H., "Cutting Characteristics of Ball-end Mill with Different Helix Angle", Journal of the Korean Society for Precision Engineering, Vol. 31, No.5, pp. 395-401, 2014 https://doi.org/10.7736/KSPE.2014.31.5.395
- Huang, W.T., Wu, D.H., Lin, S.P., et al., "A combined minimum quantity lubrication and MWCNT cutting fluid approach for SKD 11 end milling", Int J Adv Manuf Technol, Vol. 84, pp. 1697-1704, 2016 http://doi.org/10.1007/s00170-015-7770-2
- Seo, K.H., Son, M.K., Yoon, G.S., et al., "A study on machining conditions on surface roughness in EPS End-milling", Journal of the Korea Society of Die & Mold Engineering, Vol.11, No.2, pp.46-50, 2017
- Y. Hwang et al. "A Study on the Ultraprecision Grinding of STAVAX", Proceedings of KSPE 2010 autumn conference, Korean Society for Precision Engineering, pp. 99-100
- Rowe, W.B., "Chapter 3 - Grinding Wheel Developments", Principle of Modern Grinding Technology, pp.35-58, 2009 https://doi.org/10.1016/B978-0-8155-2018-4.50009-4