Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Finite element computer simulation of twinning caused by plastic deformation of sheet metal

  • Fuyuan Dong (School of Materials Science and Engineering, North Minzu University) ;
  • Wang Xu (School of Materials Science and Engineering, North Minzu University) ;
  • Zhengnan Wu (School of Materials Science and Engineering, North Minzu University) ;
  • Junfeng Hou (School of Materials Science and Engineering, North Minzu University)
  • Received : 2021.12.11
  • Accepted : 2023.04.19
  • Published : 2023.06.10
⟨ Previous Next ⟩

Abstract

Numerous methods have been proposed in predicting formability of sheet metals based on microstructural and macro-scale properties of sheets. However, there are limited number of papers on the optimization problem to increase formability of sheet metals. In the present study, we aim to use novel optimization algorithms in neural networks to maximize the formability of sheet metals based on tensile curve and texture of aluminum sheet metals. In this regard, experimental and numerical evaluations of effects of texture and tensile properties are conducted. The texture effects evaluation is performed using Taylor homogenization method. The data obtained from these evaluations are gathered and utilized to train and validate an artificial neural network (ANN) with different optimization methods. Several optimization method including grey wolf algorithm (GWA), chimp optimization algorithm (ChOA) and whale optimization algorithm (WOA) are engaged in the optimization problems. The results demonstrated that in aluminum alloys the most preferable texture is cube texture for the most formable sheets. On the other hand, slight differences in the tensile behavior of the aluminum sheets in other similar conditions impose no significant decreases in the forming limit diagram under stretch loading conditions.

Keywords

Acknowledgement

This work was supported by the Natural Science Foundation of China (51901002), Western Young Scholars Program (XAB2021YW12), Project (TJGC2020142) supported by Ningxia Youth Talents Supporting Program Young Top Notch Talents Supporting Program.

References

  1. Abedrabbo, N., Pourboghrat, F. and Carsley, J. (2006), "Forming of aluminum alloys at elevated temperatures-Part 1: Material characterization", Int. J. Plasticity, 22(2), 314-341. https://doi.org/10.1016/j.ijplas.2005.03.005.
  2. Adamian, A., Safari, K.H., Sheikholeslami, M., Habibi, M., Al-Furjan, M. and Chen, G. (2020), "Critical temperature and frequency characteristics of GPLs-reinforced composite doubly curved panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251.
  3. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and Won Jung, D. (2020a), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  4. Al-Furjan, M., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020b), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comp., 38(5), 1-23. https://doi.org/10.1007/s00366-020-01177-7.
  5. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and Won Jung, D. (2020c), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 257, 113146. https://doi.org/10.1016/j.compstruct.2020.113146.
  6. Al-Furjan, M., Habibi, M., Won Jung, D. and Safarpour, H. (2020d), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 257, 113152. https://doi.org/10.1016/j.compstruct.2020.113152.
  7. Al-Furjan, M., Moghadam, S.A., Dehini, R., Shan, L., Habibi, M. and Safarpour, H. (2020e), "Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Semi-numerical and finite element modeling", Thin-Wall. Struct., 159, 107242. https://doi.org/10.1016/j.tws.2020.107242.
  8. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020f), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis", Thin-Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111.
  9. Al-Furjan, M., Samimi-Sohrforozani, E., Habibi, M., Won Jung, D. and Safarpour, H. (2021a), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 257, 113152. https://doi.org/10.1016/j.compstruct.2020.113152.
  10. Al-Furjan, M.S.H., Dehini, R., Khorami, M., Habibi, M. and Won Jung, D. (2021b), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  11. Al-Furjan, M.S.H., Habibi, M., Jung, D.W., Sadeghi, S., Safarpour, H., Tounsi, A. and Chen, G. (2022a), "A computational framework for propagated waves in a sandwich doubly curved nanocomposite panel", Eng. Comp., 38(2), 1679-1696. https://doi.org/10.1007/s00366-020-01130-8.
  12. Al-Furjan, M.S.H., Habibi, M., Ni, J., Jung, D.W. and Tounsi, A. (2022b), "Frequency simulation of viscoelastic multi-phase reinforced fully symmetric systems", Engi. Comp., 38(5), 3725-3741. https://doi.org/10.1007/s00366-020-01200-x.
  13. Al-Furjan, M.S.H., Habibi, M., rahimi, A., Chen, G., Safarpour, H., Safarpour, M. and Tounsi, A. (2022c), "Chaotic simulation of the multi-phase reinforced thermo-elastic disk using GDQM", Eng. Comp., 38(1), 219-242. https://doi.org/10.1007/s00366-020-01144-2.
  14. Al-Furjan, M.S.H., hatami, A., Habibi, M., Shan, L. and Tounsi, A. (2021c), "On the vibrations of the imperfect sandwich higher-order disk with a lactic core using generalize differential quadrature method", Compos. Struct., 257, 113150. https://doi.org/10.1016/j.compstruct.2020.113150.
  15. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Based Des. Struc. Machines, 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343.
  16. Amelirad, O. and Assempour, A. (2019), "Experimental and crystal plasticity evaluation of grain size effect on formability of austenitic stainless steel sheets", J. Manuf. Process., 47, 310-323. https://doi.org/10.1016/j.jmapro.2019.09.035.
  17. Amelirad, O. and Assempour, A. (2021), "Coupled continuum damage mechanics and crystal plasticity model and its application in damage evolution in polycrystalline aggregates", Eng. Comp., 38(3), 1-15. https://doi.org/10.1007/s00366-021-01346-2.
  18. Arshid, E., Khorasani, M., Soleimani-Javid, Z., Amir, S. and Tounsi, A. (2021), "Porosity-dependent vibration analysis of FG microplates embedded by polymeric nanocomposite patches considering hygrothermal effect via an innovative plate theory", Eng. Comp., 38(5), 4051-4072. https://doi.org/10.1007/s00366-021-01382-y
  19. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comp., 38(5), 3699-3724. https://doi.org/10.1007/s00366-020-01191-9
  20. Barlat, F. (1987), "Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals", Mater. Sci. Eng., 91, 55-72. https://doi.org/10.1016/0025-5416(87)90283-7.
  21. Bellal, M., Hebali, H., Heireche, H., Bousahla, A.A., Tounsi, A., Bourada, F., Mahmoud, S., Bedia, E. and Tounsi, A. (2020), "Buckling behavior of a single-layered graphene sheet resting on viscoelastic medium via nonlocal four-unknown integral model", Steel Compos. Struct., 34(5), 643-655.
  22. Bendaida, M., Bousahla, A.A., Mouffoki, A., Heireche, H., Bourada, F., Tounsi, A., Benachour, A., Tounsi, A. and Hussain, M. (2022), "Dynamic properties of nonlocal temperature-dependent FG nanobeams under various thermal environments", Transport Porous Med., 142(1), 187-208. https://doi.org/10.1007/s11242-021-01666-3.
  23. Bendenia, N., Zidour, M., Bousahla Abdelmoumen, A., Bourada, F., Tounsi, A., Benrahou Kouider, H., Bedia, E.A.A., Mahmoud, S.R. and Tounsi, A. (2020), "Deflections, stresses and free vibration studies of FG-CNT reinforced sandwich plates resting on Pasternak elastic foundation", Comp. Concrete, 26(3), 213-226. https://doi.org/10.12989/CAC.2020.26.3.213.
  24. Berge, F., Kruger, L. and Ullrich, C. (2014), "Forming limit diagrams of twin-roll cast, rolled and heat-treated AZ31 as a function of temperature and loading rate", Mater. Sci. Eng.: A, 614, 27-35. https://doi.org/10.1016/j.msea.2014.07.007.
  25. Bouafia, H., Chikh, A., Bousahla, A.A., Bourada, F., Heireche, H., Tounsi, A., Benrahou, K.H., Tounsi, A., Al-Zahrani, M.M. and Hussain, M. (2021), "Natural frequencies of FGM nanoplates embedded in an elastic medium", Adv. Nano Res., 11(3), 239-249. https://doi.org/10.12989/anr.2021.11.3.239.
  26. Bourada, F., Bousahla Abdelmoumen, A., Tounsi, A., Bedia, E.A.A., Mahmoud, S.R., Benrahou Kouider, H. and Tounsi, A. (2020), "Stability and dynamic analyses of SW-CNT reinforced concrete beam resting on elastic-foundation", Comp. Concrete, 25(6), 485-495. https://doi.org/10.12989/CAC.2020.25.6.485.
  27. Bousahla Abdelmoumen, A., Bourada, F., Mahmoud, S.R., Tounsi, A., Algarni, A., Bedia, E.A.A. and Tounsi, A. (2020), "Buckling and dynamic behavior of the simply supported CNTRC beams using an integral-first shear deformation theory", Comp. Concrete, 25(2), 155-166. https://doi.org/10.12989/CAC.2020.25.2.155.
  28. Casari, F., Tassan, M., Messina, A. and Molinari, A. (2006), "Effect of punch diameter, grid dimension, and lubrication on forming limit diagram", J. Test. Eval., 34(1), 24-30. https://doi.org/10.1520/JTE12669.
  29. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 284, 115195. https://doi.org/10.1016/j.compstruct.2022.115195.
  30. Chen, X., Fan, L., Ji, D. and Lin, P. (2023), "The capability of coupled fuzzy logic and adaptive neural network in the formability prediction of steel sheets", Wave. Random Complex Media, 1-19. https://doi.org/10.1080/17455030.2022.2162154.
  31. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.W., Habibi, M. and Safarpour, M. (2020), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Based Des. Struct. Machines, 50(4), 1-24. https://doi.org/10.1080/15397734.2020.1744005.
  32. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175. https://doi.org/10.12989/anr.2021.10.2.175.
  33. Dai, Z., Tang, H., Wu, S., Habibi, M., Moradi, Z. and Ali, H.E. (2023a), "Nonlinear consecutive dynamic instabilities of thermally shocked composite circular plates on the softening elastic foundation", Thin-Wall. Struct., 186, 110645. https://doi.org/10.1016/j.tws.2023.110645.
  34. Dai, Z., Wu, S., Habibi, M. and Ali, H.E. (2023b), "Application of point interpolation mesh-free method for magneto/electro rheological vibrations of sandwich conical panels", Aerosp. Sci. Tech., 135, 108180. https://doi.org/10.1016/j.ast.2023.108180.
  35. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  36. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021c), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  37. Do, D.T.T., Nguyen-Xuan, H. and Lee, J. (2020), "Material optimization of tri-directional functionally graded plates by using deep neural network and isogeometric multimesh design approach", Appl. Math. Model., 87, 501-533. https://doi.org/10.1016/j.apm.2020.06.002.
  38. Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TEGDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound. Elem., 138, 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017.
  39. Duong, H.T., Phan, H.C., Tran, T.M. and Dhar, A.S. (2021), "Assessment of critical buckling load of functionally graded plates using artificial neural network modeling", Neur. Comp. Appl., 33(23), 16425-16437. https://doi.org/10.1007/s00521-021-06238-6.
  40. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019a), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comp., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4.
  41. Ebrahimi, F., Hajilak, Z.E., Habibi, M. and Safarpour, H. (2019b), "Buckling and vibration characteristics of a carbon nanotube-reinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions", Proceedings Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 233(13), 4590-4605. https://doi.org/10.1177/0954406219832323.
  42. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020a), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Tech., 26(2), 461-473. https://doi.org/10.1007/s00542-019-04542-9.
  43. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2019c), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Wave. Random Complex Media, 31(6), 1-27. https://doi.org/10.1080/17455030.2019.1694729.
  44. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020b), "Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer", Eur. Phys. J. Plus, 135(2), 144. https://doi.org/10.1140/epjp/s13360-020-00217-x.
  45. El Fakir, O., Wang, L., Balint, D., Dear, J.P. and Lin, J. (2014), "Predicting effect of temperature, strain rate and strain path changes on forming limit of lightweight sheet metal alloys", Procedia Eng., 81, 736-741. https://doi.org/10.1016/j.proeng.2014.10.069.
  46. Esfahani, R.T., Golabi, S.i. and Zojaji, Z. (2016), "Optimization of finite element model of laser forming in circular path using genetic algorithms and ANFIS", Soft Comp., 20(5), 2031-2045. https://doi.org/10.1007/s00500-015-1622-8.
  47. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Based Des. Struct. Machines, 47(5), 521-545. https://doi/10.1080/15397734.2019.1566743.
  48. Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022a), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518.
  49. Fan, L., Kong, D., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022b), "Optimization dynamic responses of laminated multiphase shell in thermo-electro-mechanical conditions", Adv. Nano Res., 13(1), 29-45. https://doi.org/10.12989/anr.2022.13.1.029.
  50. Fang, Z., Zhu, Z., Wu, P. and Moradi, Z. (2023), "Vibration and damping analysis of sandwich electrorheological fluid deep arches with bi-directional FGM containers", Eng. Struct., 276, 115325. https://doi.org/10.1016/j.engstruct.2022.115325.
  51. Fazaeli, A., Habibi, M. and Ekrami, A. (2016), "Experimental and finite element comparison of mechanical properties and formability of dual phase steel and ferrite-pearlite steel with the same chemical composition", Metallurgical Eng., 19(2), 84-93. http://dx.doi.org/10.22076/me.2017.41458.1064.
  52. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Based Des. Struct. Machines, 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310.
  53. Graf, A. and Hosford, W. (1994), "The influence of strain-path changes on forming limit diagrams of A1 6111 T4", Int. J. Mech. Sci., 36(10), 897-910. https://doi.org/10.1016/0020-7403(94)90053-1.
  54. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comp., 38(5), 1-22. https://doi.org/10.1007/s00366-021-01433-4.
  55. Guo, Y., Mi, H. and Habibi, M. (2021b), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Sys. Signal Pr., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723.
  56. Habibi, M., Darabi, R., Sa, J.C.D. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proceedings Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 235(8), 1937-1951. https://doi.org/10.1177/14644207211024686.
  57. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech Eng. 48(4), 141-144. https://doi.org/10.22060/MEJ.2016.664.
  58. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019a), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Eur Phys. J. Plus, 134(6), 307. https://doi.org/10.1140/epjp/i2019-12742-7.
  59. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proceedings Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 232(8), 625-636. https://doi.org/10.1177/1464420716642258.
  60. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Performance, 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1.
  61. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Process, 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009.
  62. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019b), "Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell", J. Braz. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x.
  63. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2019c), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Based Des. Struct. Machines, 49(6), 1-30. https://doi.org/10.1080/15397734.2019.1701490.
  64. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019d), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Based Des. Struct. Machines, 49(5), 1-19. https://doi.org/10.1080/15397734.2019.1697932.
  65. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Based Des. Struct. Machines, 50(7), 1-22. https://doi.org/10.1080/15397734.2020.1779086.
  66. Habibi, M., Taghdir, A. and Safarpour, H. (2019e), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B: Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125.
  67. Hashemi, H.R., Alizadeh, A.a., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Wave Random Complex Media, 31(6), 1-27. https://doi.org/10.1080/17455030.2019.1662968.
  68. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin-Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019.
  69. Heidari, F., Taheri, K., Sheybani, M., Janghorban, M. and Tounsi, A. (2021), "On the mechanics of nanocomposites reinforced by wavy/defected/aggregated nanotubes", Steel Compos. Struct., 38(5), 533-545.
  70. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comp., 38(4), 3217-3235. https://doi.org/10.1007/s00366-021-01456-x.
  71. Hsu, E., Carsley, J.E. and Verma, R. (2008), "Development of Forming Limit Diagrams of Aluminum and Magnesium Sheet Alloys at Elevated Temperatures", J. Mater. Eng. Performance, 17(3), 288-296. https://doi.org/10.1007/s11665-007-9196-y.
  72. Hu, P., Moradi, Z., Ali, H.E. and Foong, L.K. (2022), "Metaheuristic-reinforced neural network for predicting the compressive strength of concrete", Smart Struct. Sys., 30(2), 195-207.
  73. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021a), "Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem", Eng. Comp., 38(5), 4163-4179. https://doi.org/10.1007/s00366-021-01399-3.
  74. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2022), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comp., 38(3), 2481-2498. https://doi.org/10.1007/s00366-021-01395-7.
  75. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021b), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comp., 1-13. https://doi.org/10.1007/s00366-021-01320-y.
  76. Huang, Y., Karami, B., Shahsavari, D. and Tounsi, A. (2021c), "Static stability analysis of carbon nanotube reinforced polymeric composite doubly curved micro-shell panels", Arch. Civil Mech. Eng., 21(4), 139. https://doi.org/10.1007/s43452-021-00291-7.
  77. Jiao, J., Ghoreishi, S.-m., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magneto-electro-elastic nanosystem", Eng. Comp., 1-15. https://doi.org/10.1007/s00366-021-01391-x.
  78. Jie, M., Cheng, C.H., Chan, L.C. and Chow, C.L. (2009), "Forming limit diagrams of strain-rate-dependent sheet metals", Int. J. Mech. Sci., 51(4), 269-275. https://doi.org/10.1016/j.ijmecsci.2009.01.007.
  79. Jin, X., Moradi, Z. and Rashidi, R. (2023), "Optimal operation of distributed generations in four-wire unbalanced distribution systems considering different models of loads", Int. Transactions Elec. Energy Sys., 2023. https://doi.org/10.1155/2023/8763116.
  80. Khishe, M. and Mosavi, M.R. (2020), "Chimp optimization algorithm", Expert Sys. Appl., 149, 113338. https://doi.org/10.1016/j.eswa.2020.113338.
  81. Kong, F., Dong, F., Duan, M., Habibi, M., Safarpour, H. and Tounsi, A. (2022), "On the vibrations of the Electrorheological sandwich disk with composite face sheets considering pre and post-yield regions", Thin-Wall. Struct., 179, 109631. https://doi.org/10.1016/j.tws.2022.109631.
  82. Kotkunde, N., Deole, A.D. and Gupta, A.K. (2014), "Prediction of forming limit diagram for ti-6al-4v alloy using artificial neural network", Procedia Mater. Sci., 6, 341-346. https://doi.org/10.1016/j.mspro.2014.07.043.
  83. Kumar, Y., Gupta, A. and Tounsi, A. (2021), "Size-dependent vibration response of porous graded nanostructure with FEM and nonlocal continuum model", Adv. Nano Res., 11(1), 1-17.
  84. Li, J., Tang, F. and Habibi, M. (2020a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNP-reinforced composite nanostructure", Eng. Comp., 38, 1599-1580. https://doi.org/10.1007/s00366-020-01110-y.
  85. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020b), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comp., 38(1), 703-724. https://doi.org/10.1007/s00366-020-01166-w.
  86. Lingamdinne, L.P., Amelirad, O., Koduru, J.R., Karri, R.R., Chang, Y.-Y., Dehghani, M.H. and Mubarak, N.M. (2023), "Functionalized bentonite for removal of Pb(II) and As(V) from surface water: Predicting capability and mechanism using artificial neural network", J. Water Process Eng., 51, 103386. https://doi.org/10.1016/j.jwpe.2022.103386.
  87. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021a), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comp., 38, 3977-3991. https://doi.org/10.1007/s00366-021-01316-8.
  88. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021b), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comp., 38(5), 4181-4196. https://doi.org/10.1007/s00366-021-01419-2.
  89. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021c), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comp., 38(4), 3631-3653. https://doi.org/10.1007/s00366-021-01454-z.
  90. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020a), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Based Des. Struct. Machines, 50(8), 2688-2713. https://doi.org/10.1080/15397734.2020.1784201.
  91. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020b), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermomechanical loadings", Mech. Based Des. Struct. Machines, 50(11), 3722-3746. https://doi.org/10.1080/15397734.2020.1815544.
  92. Lori, E.S., Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer", Eng. Comp., 37, 3489-3508. https://doi.org/10.1007/s00366-020-01004-z
  93. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022a), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech. A-Solid, 94, 104581. https://doi.org/10.1016/j.euromechsol.2022.104581
  94. Luo, J., Wu, S., Hou, S., Moradi, Z., Habibi, M. and Khadimallah, M.A. (2022b), "Thermally nonlinear thermoelasticity of a one-dimensional finite domain based on the finite strain concept", Eur. J. Mech. A-Solid, 96, 104726. https://doi.org/10.1016/j.euromechsol.2022.104726
  95. Ma, L., Liu, X. and Moradi, Z. (2021a), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comp., 1-25. https://doi.org/10.1007/s00366-020-01210-9
  96. Ma, R., Karimzadeh, M., Ghabussi, A., Zandi, Y., Baharom, S., Selmi, A. and Maureira-Carsalade, N. (2021b), "Assessment of composite beam performance using GWO-ELM metaheuristic algorithm", Eng. Comp., 38, 2083-2099. https://doi.org/10.1007/s00366-021-01363-1
  97. Matouk, H., Bousahla Abdelmoumen, A., Heireche, H., Bourada, F., Bedia, E.A.A., Tounsi, A., Mahmoud, S.R., Tounsi, A. and Benrahou, K.H. (2020), "Investigation on hygro-thermal vibration of P-FG and symmetric S-FG nanobeam using integral Timoshenko beam theory", Adv. Nano Res., 8(4), 293-305. https://doi.org/10.12989/anr.2020.8.4.293
  98. Michael, M., Meyyazhagan, A., Velayudhannair, K., Pappuswamy, M., Maria, A., Xavier, V., Balasubramanian, B., Baskaran, R., Kamyab, H. and Vasseghian, Y. (2022), "The Content of Heavy Metals in Cigarettes and the Impact of Their Leachates on the Aquatic Ecosystem", Sustain., 14(8), 4752. https://doi.org/10.3390/su14084752.
  99. Mirjalili, S. and Lewis, A. (2016), "The whale optimization algorithm", Adv. Eng. Software, 95, 51-67. https://doi.org/10.1016/j.advengsoft.2016.01.008.
  100. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020a), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(01), 2050010. https://doi.org/10.1142/S1758825120500106.
  101. Moayedi, H., Ebrahimi, F., Habibi, M., Safarpour, H. and Foong, L.K. (2020b), "Application of nonlocal strain-stress gradient theory and GDQEM for thermo-vibration responses of a laminated composite nanoshell", Eng. Comp., 37, 3359-3374. https://doi.org/10.1007/s00366-020-01002-1.
  102. Moayedi, H., Habibi, M., Safarpour, H., Safarpour, M. and Foong, L. (2019), "Buckling and frequency responses of a graphene nanoplatelet reinforced composite microdisk", Int. J. Appl. Mech., 11(10), 1950102. https://doi.org/10.1142/S1758825119501023.
  103. Mohammadgholiha, M., Shokrgozar, A., Habibi, M. and Safarpour, H. (2019), "Buckling and frequency analysis of the nonlocal strain-stress gradient shell reinforced with graphene nanoplatelets", J. Vib. Control, 25(19-20), 2627-2640. https://doi.org/10.1177/1077546319863251.
  104. Mohammadi, A., Lashini, H., Habibi, M. and Safarpour, H. (2019), "Influence of viscoelastic foundation on dynamic behaviour of the double walled cylindrical inhomogeneous micro shell using MCST and with the aid of GDQM", J. Solid Mech., 11(2), 440-453. https://doi.org/10.22034/JSM.2019.665264.
  105. Moradi, H., Atashi, P., Amelirad, O., Yang, J.-K., Chang, Y.-Y. and Kamranifard, T. (2022a), "Machine learning modeling and DOE-assisted optimization in synthesis of nanosilica particles via Stober method ", Adv. Nano Res., 12(4), 387-403. https://doi.org/10.12989/anr.2022.12.4.387
  106. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1926572
  107. Moradi, Z., Ebrahimi, F. and Davoudi, M. (2022b), "Coupled Newmark beta technique and GDQ method for energy harvesting and vibration control of the piezoelectric MEMS/NEMS subjected to a blast load", Eng. Anal. Boundary Elem., 144, 492-506. https://doi.org/10.1016/j.enganabound.2022.08.021.
  108. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D.W. and Nabipour, N. (2020), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomol. Struct. Dyn., 39(7), 2543-2554. https://doi.org/10.1080/07391102.2020.1751297.
  109. Oyarhossein, M.A., Alizadeh, A.., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Sci. Reports, 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w.
  110. Peng, S., Habibi, M. and Pourjabari, A. (2023), "Generalized differential quadrature element solution, swarm, and GA optimization technique to obtain the optimum frequency of the laminated rotary nanostructure", Eng. Anal. Boundary Elem., 151, 101-114. https://doi.org/10.1016/j.enganabound.2023.02.052
  111. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comp. Math. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041.
  112. Rouabhia, A., Chikh, A., Bousahla, A.A., Bourada, F., Heireche, H., Tounsi, A., Kouider Halim, B., Tounsi, A. and Al-Zahrani, M.M. (2020), "Physical stability response of a SLGS resting on viscoelastic medium using nonlocal integral first-order theory", Steel Compos. Struct., 37(6), 695-709. https://doi.org/10.12989/scs.2020.37.6.695.
  113. Sabzevari, F., Amelirad, O., Moradi, Z. and Habibi, M. (2023), "Artificial intelligence evaluation of COVID-19 restrictions and speech therapy effects on the autistic children's behavior", Sci. Reports, 13(1), 4312. https://doi.org/10.1038/s41598-022-25902-y.
  114. Safarpour, H., Ghanizadeh, S.A. and Habibi, M. (2018), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Eur. Phys. J. Plus, 133(12), 532. https://doi.org/10.1140/epjp/i2018-12385-2.
  115. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019a), "A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8.
  116. Safarpour, H., Pourghader, J. and Habibi, M. (2019b), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator", J. Vib. Control, 25(9), 1543-1557. https://doi.org/10.1177/1077546319828465.
  117. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comp., 37(3), 2369-2388. https://doi.org/10.1007/s00366-020-00949-5.
  118. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3.
  119. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2020a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comp., 37, 3629-3648. https://doi.org/10.1007/s00366-020-01024-9.
  120. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020b), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Mater., 13(7), 1707. https://doi.org/10.3390/ma13071707.
  121. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020c), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetr., 12(4), 586. https://doi.org/10.3390/sym12040586.
  122. Shariati, M., Kamyab, H., Habibi, M., Ahmadi, S., Naghipour, M., Gorjinezhad, F., Mohammadirad, S. and Aminian, A. (2023), "Sulfuric acid resistance of concrete containing coal waste as a partial substitute for fine and coarse aggregates", Fuel, 348, 128311. https://doi.org/10.1016/j.fuel.2023.128311.
  123. Shokrgozar, A., Safarpour, H. and Habibi, M. (2020), "Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator", Proceedings Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 234(2), 512-529. https://doi.org/10.1177/0954406219883312.
  124. Signorelli, J., Bertinetti, M. and Turner, P. (2009), "Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model", Int. J. Plasticity, 25(1), 1-25. https://doi.org/10.1016/j.ijplas.2008.01.005.
  125. Stoughton, T.B. and Yoon, J.W. (2012), "Path independent forming limits in strain and stress spaces", Int. J. Solids Struct., 49(25), 3616-3625. https://doi.org/10.1016/j.ijsolstr.2012.08.004.
  126. Taghavi, M. and Khishe, M. (2019), "A Modified Grey Wolf Optimizer by Individual Best Memory and Penalty Factor for Sonar and Radar Dataset Classification", Iran. J. Marine Tech., 6(1), 120-130. https://www.sid.ir/paper/747128/en.
  127. Turan, M., Uzun Yaylaci, E. and Yaylaci, M. (2022), "Free vibration and buckling of functionally graded porous beams using analytical, finite element, and artificial neural network methods", Arch. Appl. Mech., 93(4), 1351-1372. https://doi.org/10.1007/s00419-022-02332-w.
  128. Van Vinh, P. and Tounsi, A. (2021), "The role of spatial variation of the nonlocal parameter on the free vibration of functionally graded sandwich nanoplates", Eng. Comp., 38(5), 4301-4319. https://doi.org/10.1007/s00366-021-01475-8.
  129. Wang, P., Gao, Z., Pan, F., Moradi, Z., Mahmoudi, T. and Khadimallah, M.A. (2022a), "A couple of GDQM and iteration techniques for the linear and nonlinear buckling of bidirectional functionally graded nanotubes based on the nonlocal strain gradient theory and high-order beam theory", Eng. Anal. Boundary Elem., 143, 124-136. https://doi.org/10.1016/j.enganabound.2022.06.007.
  130. Wang, X., Wu, S., Yin, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2023), "On the electromechanical energy absorption of the reinforced composites piezoelectric MEMS via Adaptive neuro-fuzzy inference system and MCS theory", Compos. Struct., 303, 116246. https://doi.org/10.1016/j.compstruct.2022.116246
  131. Wang, Y., Shih, Y.Y.I. and Lee, Y.-s. (2021), "Vibration-assisted insertion of flexible neural microelectrodes with bio-dissolvable guides for medical implantation", Int. Manuf. Sci. Eng. Conference, Online, June. https://doi.org/10.1115/MSEC2021-63952
  132. Wang, Y., Yang, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022b), "Nonlinear dynamic analysis of thermally deformed beams subjected to uniform loading resting on nonlinear viscoelastic foundation", Eur. J. Mech. A-Solids, 95, 104638. https://doi.org/10.1016/j.euromechsol.2022.104638.
  133. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 29(10), 1475-1488. https://doi.org/10.1080/15376494.2020.1824284.
  134. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultrafast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comp., 38(5), 4127-4143. https://doi.org/10.1007/s00366-021-01396-6.
  135. Wu, P., Neale, K., Van der Giessen, E., Jain, M., MacEwen, S. and Makinde, A. (1998), "Crystal plasticity forming limit diagram analysis of rolled aluminum sheets", Metall. Mater. Trans. A, 29(2), 527-535. https://doi.org/10.1007/s11661-998-0134-x.
  136. Xiang, J., Lai, Y., Moradi, Z. and Khorami, M. (2023), "Wave propagation phenomenon of functionally graded graphene oxide powder-strengthened nanocomposite curved beam", Solid State Comm., 115193. https://doi.org/10.1016/j.ssc.2023.115193
  137. Xie, Y., Wu, Y., Jalali, A., Zhou, H. and Amine Khadimallah, M. (2022), "Effects of thickness reduction in cold rolling process on the formability of sheet metals using ANFIS", Sci. Reports, 12(1), 10434. https://doi.org/10.1038/s41598-022-13694-0.
  138. Xiong, Q.-M., Chen, Z., Huang, J.-T., Zhang, M., Song, H., Hou, X.-F., Li, X.-B. and Feng, Z.-J. (2020), "Preparation, structure and mechanical properties of Sialon ceramics by transition metal-catalyzed nitriding reaction", Rare Met., 39(5), 589-596. https://doi.org/10.1007/s12598-020-01385-6.
  139. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 275, 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  140. Yang, C., Su, C., Hu, H., Habibi, M., Safarpour, H. and Khadimallah, M.A. (2023), "Performance optimization of photovoltaic and solar cells via a hybrid and efficient chimp algorithm", Solar Energy, 253, 343-359. https://doi.org/10.1016/j.solener.2023.02.036.
  141. Yang, N., Moradi, Z., Arvin, H., Muhsen, S. and Khadimallah, M.A. (2022a), "A study on small scale thermal dynamic instability of rotating GPL-reinforced microbeams under principal parametric resonance stimulation of axial and transversal modes regarding the proportional damping", ThinWall. Struct., 180, 109806. https://doi.org/10.1016/j.tws.2022.109806.
  142. Yang, N., Moradi, Z., Khadimallah, M.A. and Arvin, H. (2022b), "Application of the Chebyshev-Ritz route in determination of the dynamic instability region boundary for rotating nanocomposite beams reinforced with graphene platelet subjected to a temperature increment", Eng. Anal. Boundary Elem., 139, 169-179. https://doi.org/10.1016/j.enganabound.2022.03.013.
  143. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic high-order computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Sys. Signal Processing, 165, 108373. https://doi.org/10.1016/j.ymssp.2021.108373.
  144. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Sys., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469.
  145. Zerrouki, R., Karas, A., Zidour, M., Bousahla, A.A., Tounsi, A., Bourada, F., Tounsi, A., Benrahou, K.H. and Mahmoud, S. (2021), "Effect of nonlinear FG-CNT distribution on mechanical properties of functionally graded nano-composite beam", Struct. Eng. Mech., Int. J., 78(2), 117-124. http://dx.doi.org/10.12989/sem.2021.78.2.117.
  146. Zhang, L., Chen, Z., Habibi, M., Ghabussi, A. and Alyousef, R. (2021a), "Low-velocity impact, resonance, and frequency responses of FG-GPLRC viscoelastic doubly curved panel", Compos. Struct., 269, 114000. https://doi.org/10.1016/j.compstruct.2021.114000.
  147. Zhang, P., Gao, Y., Moradi, Z., Ali, Y.A. and Khadimallah, M.A. (2022), "A semi-analytical procedure for cross section effect on the buckling and dynamic stability of composite imperfect truncated conical microbeam", Steel Compos. Struct., 44(3), 357-374. https://doi.org/10.12989/scs.2022.44.3.371.
  148. Zhang, S., Lai, Y., Chen, K., Habibi, M., Khorami, M. and Haider Mussa, Z. (2023), "Influence of MWCNT's waviness and aggregation factors on wave dispersion response of MWCNT-strengthened nanocomposite curved beam", Struct., 53, 1239-1249. https://doi.org/10.1016/j.istruc.2023.04.024.
  149. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021b), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1948627.
  150. Zhao, H., Li, C., Fu, Y., Oyarhossein, M.A., Habibi, M. and Safarpour, H. (2023), "Quasi-static indentation, low-velocity impact, and resonance responses of the laminated double-curved panel considering various boundary conditions", Thin-Wall. Struct., 183, 110360. https://doi.org/10.1016/j.tws.2022.110360.
  151. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. (2021), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comp., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  152. Zheng, W., Liu, J., Oyarhossein, M.A., Safarpour, H. and Habibi, M. (2023), "Prediction of nth-order derivatives for vibration responses of a sandwich shell composed of a magnetorheological core and composite face layers", Eng. Anal. Boundary Elem., 146, 170-183. https://doi.org/10.1016/j.enganabound.2022.10.019.
  153. Zheng, Y., Jin, H., Jiang, C., Moradi, Z., Khadimallah, M.A. and Moayedi, H. (2022), "Analyzing behavior of circular concrete-filled steel tube column using improved fuzzy models", Steel Compos. Struct., 43(5), 625-637. https://doi.org/10.12989/scs.2022.43.5.625.
  154. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano. Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.
  155. Zhou, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022a), "Intelligent modeling to investigate the stability of a two-dimensional functionally graded porosity-dependent nanobeam", Comp. Concrete, 30(2), 85-97.
  156. Zhou, L., Moradi, Z., Al-Tamimi, H.M. and Ali, H.E. (2022b), "On propagation of elastic waves in an embedded sigmoid functionally graded curved beam", Steel and Composite Structures, 44(1), 17.
  157. Zhu, L., Ren, H., Habibi, M., Mohammed, K.J. and Khadimallah, M.A. (2022), "Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm", J. Clean. Prod., 365, 132697. https://doi.org/10.1016/j.jclepro.2022.132697.