Advances in concrete construction

  • 제16권2호
  • /
  • Pages.91-96
  • /
  • 2023
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Procedure for the correct placement of Long-Thread Short-Thread couplers in mechanical connections of reinforcing bars

  • Enrique Hernandez-Montes (School of Civil Engineers, University of Granada) ;
  • Fouzia Larbi-Chaht (Material's Laboratory (LABMAT), Department of Civil Engineering, National Polytechnic School of Oran (ENPO)) ;
  • Mohamed Mouli (Material's Laboratory (LABMAT), Department of Civil Engineering, National Polytechnic School of Oran (ENPO)) ;
  • Lahouari Mammar (Civil Engineering Department, USTOran) ;
  • Sadek Mahdjouba (Civil Engineering Department, USTOran) ;
  • Ahmed M. Mohamed (Material's Laboratory (LABMAT), Department of Civil Engineering, National Polytechnic School of Oran (ENPO)) ;
  • Abdelkader Medjahed (Material's Laboratory (LABMAT), Department of Civil Engineering, National Polytechnic School of Oran (ENPO)) ;
  • Ahmed Messaoud-Djebara (Material's Laboratory (LABMAT), Department of Civil Engineering, National Polytechnic School of Oran (ENPO)) ;
  • Luisa Maria Gil-Martin (School of Civil Engineers, University of Granada)
  • 투고 : 2021.03.03
  • 심사 : 2023.09.22
  • 발행 : 2023.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present work provides a new solution to both the correct execution and quality control of straight thread couplers for reinforcing bars under monotonic loading conditions. A random survey on already constructed couplers together with a new mechanical model, adjusted with an experimental campaign, led us to present this new procedure in reinforced concrete construction. Formulation and methodology for a correct placement of straight thread couplers is presented.

키워드

과제정보

The authors would like to acknowledge ERSI Group for their support during the development of the project, and the financial support provided to the Atarcher project by the Spanish governmental institution CDTI (Centro para el Desarrollo Tecnologico Industrial) and by Directorate-General of Scientific Research and Technological Development (DGRSDT) of Algeria. The authors would also like to thank the engineer Dehamchia Loubna of ATA enterprise for her time and helpfulness in the development of the project.

참고문헌

  1. Al-Azzawi, A.A., Daud, R.A. and Daud, S.A. (2020), "Behavior of tension lap spliced sustainable concrete flexural members", Adv. Concrete Constr., Int. J., 9(1), 83-92. https://doi.org/10.12989/acc.2020.9.1.083 
  2. American Association of State Highway and Transportation (2014), AASHTO Guide Specifications for LRFD Seismic Bridge Design, Washington, D.C., USA. 
  3. Bompa, D.V. and Elghazouli, A.Y. (2019), "Inelastic cyclic behaviour of RC members incorporating threaded reinforcement couplers", Eng. Struct., 180, 468-483. https://doi.org/10.1016/j.engstruct.2018.11.053 
  4. Canbay, E. (2007), "Comparison of code provisions on lap splices", Struct. Eng. Mech., Int. J., 27(1), 63-75. https://doi.org/10.12989/sem.2007.27.1.063 
  5. CRSI (2020), Concrete Reinforcing Steel Institute; Splicing Bar.
  6. Karabinis, A.I. (2002), "Reinforced concrete beam-column joints with lap splices under cyclic loading", Struct. Eng. Mech., Int. J., 14(6), 649-660. https://doi.org/10.12989/sem.2002.14.6.649 
  7. Karkarna, Y.M., Bahadori-Jahromi, A., Jahromi, H., Halliwell, E. and Goodchild, C. (2020), "Comparative study of factors influencing tension lap splices in reinforced concrete beams", Adv. Concrete Constr., Int. J., 10(4), 279-287. https://doi.org/10.12989/acc.2020.10.4.279 
  8. Kim, H.K. and Lee, S.H. (2012), "Lateral confining action of mortar-filled sleeve reinforcement splice", Struct. Eng. Mech., Int. J., 41(3), 379-393. https://doi.org/10.12989/sem.2012.41.3.379 
  9. Lu, Z., Huang, J., Li, Y., Dai, S., Peng, Z., Liu, X. and Zhang, M. (2019), "Mechanical behaviour of grouted sleeve splice under uniaxial tensile loading", Eng. Struct., 186, 421-435. https://doi.org/10.1016/j.engstruct.2019.02.033 
  10. Ma, F., Deng, M., Ma, Y., Lu, H., Yang, Y. and Sun, H. (2021), "Experimental study on interior precast concrete beam-column connections with lap-spliced steel bars in field-cast RPC", Eng. Struct., 228, 111481. https://doi.org/10.1016/j.engstruct.2020.111481 
  11. Pimanmas, A. and Thai, D.X. (2011), "Response of lap splice of reinforcing bars confined by FRP wrapping: application to nonlinear analysis of RC column", Struct. Eng. Mech., Int. J., 37(1), 111-129. https://doi.org/10.12989/sem.2011.37.1.111 
  12. Safan, M.A. (2012), "Behaviour of fiber reinforced concrete beams with spliced tension steel reinforcement", Struct. Eng. Mech., Int. J., 43(5), 623-636. https://doi.org/10.12989/sem.2012.43.5.623 
  13. Sharbatdar, M.K., Jafari, O.M. and Karimi, M.S. (2018), "Experimental evaluation of splicing of longitudinal bars with forging welding in flexural reinforced concrete beams", Adv. Concrete Constr., Int. J., 6(5), 509-525. https://doi.org/10.12989/acc.2018.6.5.509 
  14. Tazarv, M. and Saiidi, M.S. (2016), "Seismic design of bridge columns incorporating mechanical bar splices in plastic hinge regions", Eng. Struct., 124, 507-520. https://doi.org/10.1016/j.engstruct.2016.06.041 
  15. Turk, K. and Yildirim, M.S. (2003), "Bond strength of reinforcement in splices in beams", Struct. Eng. Mech., Int. J., 16(4), 469-478. https://doi.org/10.12989/sem.2003.16.4.469