한국의류산업학회지 (Fashion & Textile Research Journal)

  • 제25권2호
  • /
  • Pages.221-229
  • /
  • 2023
  • /
  • 1229-2060(pISSN)
  • /
  • 2287-5743(eISSN)
한국의류산업학회 (The Society of Fashion and Textile Industry)
권호 표지
DOI QR코드

DOI QR Code

3D 프린팅 패드를 활용한 무릎 보호대의 설계 및 평가

Design and Evaluation of a Knee Protector using a 3D Printing Pad

  • Xi Yu Li (Dept. of Clothing & Textiles, Pusan National University) ;
  • Jung Hyun Park (Dept. of Clothing & Textiles, Paichai University) ;
  • Jeong Ran Lee (Dept. of Clothing & Textiles, Pusan National University)
  • 투고 : 2023.03.22
  • 심사 : 2023.04.19
  • 발행 : 2023.04.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study aims to develop knee protectors that provide high safety and fitness, while incorporating a motion-adaptable 3D-printed pad. These protectors were evaluated by individuals who experience knee discomfort or pain. The results are as follows. First, the 3Dprinted pad design of a hexagonal mesh structure, which is modeled for excellent appearance and knee movement. Each unit of the mesh has a outer layer of 2mm thick, a spacer layer of 1 mm in diameter, and is connected by a 1.5 mm bridge. The bridge was extended up to 1.2 cm. Second, the knee brace was designed in three types - cylinder, strap, and combination by Universal design. Impact protection measurements of the three knee protectors demonstrated roughly 80% reduction in impact. Third, based on usability evaluation, cylinder type protectors have the highest ratings in most areas, primarily because of their ease of use. The strap type protector received positive reviews in terms of appearance and care, and the combination type provided stable knee protection. This study demonstrated the potential industrial application of 3D printing technology by designing and evaluating protective products for the human body. The results of this study are expected to aid knee protector manufacturers in developing practical products and promoting the development of protective equipment for other body parts or purposes.

키워드

과제정보

이 논문은 2018년도 정부(교육부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(No. 2018R1D1A1A09082741).

참고문헌

  1. Jang, J. H., Jung, H. K., Park, J. H., & Lee, J. R. (2020). An analysis on the changes of knees and hip joint surface according to elderly women's movements. Fashion & Textile Research Journal, 22(2), 222-232. doi:10.5805/SFTI.2020.22.2.222
  2. Jung, H. J., Lee, H. R., Chung, I. H. (2022). Development of the 3D knee protector for yoga. Journal of the Korean Society of Clothing and Textiles, 46(4), 657-671. doi:10.5850/JKSCT.2022.46.4.657
  3. Kim, J. H. (2015). The development of protective clothing pattern for riot police woman using 3D printing. Unpublished doctoral dissertation, Konkuk University, Seoul.
  4. Kim, S. B., & Lee, Y. S. (2007). The evaluation of women empolyees of department store about the characteristics, the movement adaptability and the fitness of their uniform. Fashion & Textile Research Journal, 9(5), 528-537.
  5. Kim, S. Y., & Nam, Y. J. (2012). A study on establishing of fit test conditions for slacks. Fashion & Textile Research Journal, 14(3), 454-464. doi:10.5805/KSCI.2012.14.3.454
  6. 'Knee protector'. (n. d.). KIPRIS. Retrieved April 12, 2020, from http://www.kipris.or.kr/kportal/search/total_search.do
  7. 'Knee assistance device'. (n. d.). KIPRIS, Retrieved April 12, 2020, from http://www.kipris.or.kr/kportal/search/total_search.do
  8. Koo, D. S., & Lee, J. R. (2017). The development of a wrist brace using 3D scanner and 3D printer. Fashion & Textile Research Journal, 19(3), 312-319. doi:10.5805/SFTI.2017.19.3.312
  9. Korean Agency for Technology and Standards. (2015). The 7th Size Korea 3D scan & measurement technology report. Seoul: Government Printing Office. Retrieved June 29, 2020, from http://sizekorea.kats.go.kr
  10. Kweon, S., & Sohn, B. H. (2010). A study on body satisfaction and fitness apparel based on body type by body mass index - In women 20-50's years of age. Journal of the Korean Home Economics Association, 48(6), 1-8. doi:10.6115/khea.2010.48.6.001
  11. Lee, K. S., & Choi, J. W. (2014). Development of Jeggings pattern considering body fit-focus on 20-24 year old females. Journal of the Korean Society of Clothing and Textiles, 38(5), 675-689. doi:10.5850/JKSCT.2014.38.5.675
  12. Lee, H. J., Kim, N. Y., Hong, K. H., & Lee, Y. J. (2015). Selection and design of functional area of compression garment for improvement in knee protection. Korean Journal of Human Ecology, 24(1), 97-109. doi:10.5934/kjhe.2015.24.1.97
  13. Lee, H., & Lee, Y. (2017). Segmental hard shell design of knee protector for children using 3D printing. Journal of Fashion Business, 21(4), 116-126. doi:10.12940/jfb.2017.21.4.116
  14. Lee, S. H., Jung, B. K., & Park, S. Y. (2013). Korean translation and psychometric properties of Quebec user evaluation of satisfaction assistive technology 2.0. Journal of the Korea Academia-Industrial Cooperation Society, 14(7), 3284-3292. doi:10.5762/KAIS.2013.14.7.3284
  15. Oh, H. A., Mun, K. R., Chun, S. K., Choi, S. J., Jeong, H. S., & Kim, J. W. (2017). Patella shape extraction from 3D point cloud data for personalized knee brace. Proceeding of the Korean Society for Precision Engineering, Spring Conference, Korea, pp. 291-291.
  16. Park, J. H., Jung, H. K., & Lee, J. R. (2017). Structure design of fall impact protection pad using 3D printing technology and comparison of characteristics according to filament material. Journal of the Korean Society of Clothing and Textiles, 41(5), 939-949. doi:10.5850/JKSCT.2017.41.5.939
  17. Park, J. H., Jung, H. K., & Lee, J. R. (2018). Design of fall impact protection pads using 3D printing technology and comparison of characteristics according to structure. Journal of the Korean Society of Clothing and Textiles, 42(4), 612-625. doi:10.5850/JKSCT.2018.42.4.612
  18. Park, J. H., Jung, H. K., & Lee, J. R. (2019a). Development and evaluation of fall impact protection pads using additive manufacturing. Materials, 12(20), 3440. doi:10.3390/ma12203440
  19. Park, S. Y., Lee, H. R., & Lee, Y. J. (2019b). Suggestion of crotch protector prototype for cyclewear based on 3D modeling and printing. Korean Journal of Human Ecology, 28(2), 147-157. doi:10.5934/kjhe.2019.28.2.147
  20. Rhee, J, S. (2010). A Study on the public facility design guidelines mainly with universal design. Journal of Korea Design Knowledge, 16, 101-110. doi:10.17246/jkdk.2010..16.011
  21. Seo, W. S. (2016) Changes in distal migration of knee orthoses and joint range of motion according to the cuff material. Unpublished master's thesis, Catholic University, Seoul.
  22. Shin, I. (2020). Design Research of knee Brace for usability improvement - Focused on angle control and wearing system. Unpublished master's thesis, Inje University, Kimhae.
  23. Shin, S, H., Kwon, J, D., Yu, Mi., Yu, C, H., Kwon, T, K., & Hong, J, P. (2015). Study on the design development of a trunk stabilization training device with a universal design. Archives of Design Research, 28(4), 211-220. doi:10.15187/adr.2015.11.28.4.211
  24. Yeom, J. H. (2020). Falls among Korean older adults - A study of recovery, disablement, and death. Korea Journal of Population Studies, 43(2), 103-127. doi:10.31693/KJPS.2020.06.43.2.103