Ocean Systems Engineering

  • 제13권1호
  • /
  • Pages.43-55
  • /
  • 2023
  • /
  • 2093-6702(pISSN)
  • /
  • 2093-677X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Stress concentration factors in tubular T-joints stiffened with external ring under axial load

  • Hossein Nassiraei (Department of Civil Engineering, Faculty of Engineering, University of Guilan) ;
  • Pooya Rezadoost (Faculty of Civil Engineering, K.N. Toosi University of Technology)
  • 투고 : 2023.01.03
  • 심사 : 2023.03.14
  • 발행 : 2023.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the SCFs in tubular T-joints stiffened with external ring under axial load are studied and discussed. After verification of the present numerical model with the results of several available experimental tests, 156 FE models were generated and analyzed to parametrically evaluate the effect of the joint geometry and the ring geometry on the SCFs. Results indicated that the SCF of the stiffened T-joints at crown point can be down to 24% of the SCF of the corresponding un-reinforced joint at the same point. Also, the effect of the ring on the SCF at saddle point is more remarkable than the effect of the ring on the SCF at crown point. Moreover, against un-reinforced joints under axial load, the SCF at saddle point of the stiffened joint is smaller than the SCF at crown point of that stiffened joint. The ring results in the redistribution of stresses in the ring and metal substrate. Also, the effect of the ring thickness on the decrease of the SCFs is slight and can be ignored. In final step, the geometric parameters affecting the SCFs of the stiffened T-joints are analyzed by multiple nonlinear regression analyses. An accurate formula is proposed for determining the SCFs.

키워드

과제정보

The authors gratefully acknowledge the useful comments of anonymous reviewers on the draft version of this paper.

참고문헌

  1. Ahmadi, H. and Imani, H. (2022), "SCFs in offshore two-planar tubular TT-joints reinforced with internal ring stiffeners", Ocean Syst. Eng., 12(1), 1-22. https://doi.org/10.12989/ose.2022.12.1.001.
  2. American Welding Society (AWS), Structural Welding Code: AWS D 1.1. USA (2015).
  3. Bao, S., Wang, W., Zhou, J., Qi, S. and Li, X. (2022), "Experimental study of hot spot stress for three-planar tubular Y-joint: I. Basic loads", Thin-Wall. Struct., 177, 109418. https://doi.org/10.1016/j.tws.2022.109418.
  4. Bomel Consulting Engineers. (1994), "Assessment of SCF equations using Shell/KSEPL finite element data", C5970R02. 01 REV C.
  5. Cai, Y.Q. and Shao, Y.B. (2011), "Stress concentration factor for circular tubular T-joints with collar plate reinforcement", J. Civ. Eng. Manage, 2(5).
  6. Chang, E. and Dover, W.D. (1999), "Prediction of stress distributions along the intersection of tubular Y and T-joints", Int. J. Fatigue, 21(4), 361-381. https://doi.org/10.1016/S0142-1123(98)00083-8.
  7. Elastic stress concentration factor tests on tubular steel joints - JISSP Wimpey Offshore. (1986).
  8. Fung, T.C., Soh, C.K., Chan, T.K. and Erni (2002), "Stress concentration factors of doubler plate reinforced tubular T joints", J. Struct. Eng., 128(11), 1399-1412. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:11(1399).
  9. Gho, W.M., Gao, F. and Yang, Y. (2006), "Strain and stress concentration of completely overlapped tubular CHS joints under basic loadings", J. Constr. Steel Res., 62(7), 656-674. https://doi.org/10.1016/j.jcsr.2005.11.009.
  10. Hectors, K. and De Waele, W. (2021), "Influence of weld geometry on stress concentration factor distributions in tubular joints", J. Constr. Steel Res., 176, 106376. https://doi.org/10.1016/j.jcsr.2020.106376.
  11. Hosseini, A.S., Bahaari, M.R. and Lesani, M. (2020), "Experimental and parametric studies of SCFs in FRP strengthened tubular T-joints under axially loaded brace", Eng. Struct., 213, 110548. https://doi.org/10.1016/j.engstruct.2020.110548
  12. International Institute of Welding (IIW). (2008), Recommended Fatigue Design Procedure for Welded Hollow Section Joints-part 1: Recommendations, Part 2: Commentary. XV-1035-1099, Cedex, France.
  13. Jiang, Y., Yuan, K. and Cui, H. (2018), "Prediction of stress concentration factor distribution for multi-planar tubular DT-joints under axial loads", Mar. Struct., 61, 434-451. https://doi.org/10.1016/j.marstruc.2018.06.017.
  14. Kratzer, E. (1981), "Schwingfestigkeitsuntersunchungen as Rohrstruktukturelement-modellen von offshore plattformen Report BMFT-FB (M81)". (Cited by UK Health and Safety Executive. Prepared by Lloyd's Register of Shipping).
  15. Liu, P.H., Chen, I.Y., Liu, X.Q., Su, C.K., Hsu, C.W., Dzeng, D.C. and Sung, Y.C. (2022), "Stress influence matrix on hot spot stress analysis for welded tubular joint in offshore jacket structure", Ocean Eng., 251, 111103. https://doi.org/10.1016/j.oceaneng.2022.111103.
  16. Melek, P.G., Gaawan, S. and Osman, A. (2020), "Strengthening steel CHS X-joints subject to compression by outer ring stiffeners", Int. J. Steel Struct., 20, 1115-1134. https://link.springer.com/article/10.1007/s13296-020-00346-0.
  17. Mohamed, H.S., Zhang, L., Shao, Y.B., Yang, X.S., Shaheen, M.A. and Suleiman, M.F. (2022), "Stress concentration factors of CFRP-reinforced tubular K-joints via zero point structural stress approach", Mar. Struct., 84, 103239. https://doi.org/10.1016/j.marstruc.2022.103239.
  18. Musa, I.A., Mashiri, F.R., Zhu, X. and Tong, L. (2018), "Experimental stress concentration factor in concrete-filled steel tubular T-joints", J. Constr. Steel Res., 150, 442-451. https://doi.org/10.1016/j.jcsr.2018.09.001.
  19. Myers, P.T., Brennan, F.P. and Dover, W.D. (2001), "The effect of rack/rib plate on the stress concentration factors in jack-up chords", Mar. Struct., 14(4-5), 485-505. https://doi.org/10.1016/S0951-8339(00)00051-4.
  20. N'diaye, A., Hariri, S., Pluvinage, G. and Azari, Z. (2009), "Stress concentration factor analysis for welded, notched tubular T-joints under combined axial, bending and dynamic loading", Int. J. Fatigue, 31(2), 367-374. https://doi.org/10.1016/j.ijfatigue.2008.07.014.
  21. Nassiraei, H. (2020), "Local joint flexibility of CHS T/Y-connections strengthened with collar plate under in-plane bending load: parametric study of geometrical effects and design formulation", Ocean Eng., 202, 107054. https://doi.org/10.1016/j.oceaneng.2020.107054.
  22. Nassiraei, H. and Rezadoost, P. (2022), "Probabilistic analysis of the SCFs in tubular T/Y-joints reinforced with FRP under axial, in-plane bending, and out-of-plane bending loads", Structures, 35, 1078-1097. https://doi.org/10.1016/j.istruc.2021.06.029.
  23. Nassiraei, H. (2022), "Geometrical effects on the LJF of tubular T/Y-joints with doubler plate in offshore wind turbines", Ships Offshore Struct., 17(3), 481-491. https://doi.org/10.1080/17445302.2020.1835051.
  24. Nassiraei, H. and Rezadoost, P. (2020), "Stress concentration factors in tubular T/Y-joints strengthened with FRP subjected to compressive load in offshore structures", Int. J. Fatigue, 140, 105719. https://doi.org/10.1016/j.ijfatigue.2020.105719.
  25. Nassiraei, H. and Rezadoost, P. (2021a), "Stress concentration factors in tubular T/Y-connections reinforced with FRP under in-plane bending load", Mar. Struct., 76, 102871. https://doi.org/10.1016/j.marstruc.2020.102871.
  26. Nassiraei, H. and Rezadoost, P. (2021b), "Local joint flexibility of tubular X-joints stiffened with external ring or external plates", Mar. Struct., 80, 103085. https://doi.org/10.1016/j.marstruc.2021.103085.
  27. Pan, Z., Wu, G., Si, F., Shang, J., Zhou, H., Li, Q. and Zhou, T. (2022), "Parametric study on SCF distribution along the weld toe of internally ring-stiffened two-planar tubular KK joints under axial loading", Ocean Eng., 248, 110826. https://doi.org/10.1016/j.oceaneng.2022.110826.
  28. Recommended Practice for Planning, Designing and Constructing FIxed Offshore Platforms: Working Stress Design: RP2A-WSD. (2015), twenty-first ed, US, Washington, DC.
  29. Shao, Y.B. (2007), "Geometrical effect on the stress distribution along weld toe for tubular T-and K-joints under axial loading", J. Constr. Steel Res., 63(10), 1351-1360. https://doi.org/10.1016/j.jcsr.2006.12.005.
  30. Shen, W. and Choo, Y.S. (2012), "Stress intensity factor for a tubular T-joint with grouted chord", Eng. Struct., 35, 37-47. https://doi.org/10.1016/j.engstruct.2011.10.014.
  31. Soh, A.K. and Soh, C.K. (1995), "Stress analysis of axially loaded T tubular joints reinforced with doubler plates", Comput. Struct., 55 (1), 141-149. https://doi.org/10.1016/0045-7949(94)00412-V.
  32. Swensson, K.D. and Yura, J.A. (1986), "Stress Concentration Factors in Double-Tee Tubular Joints PMFSEL Report No".
  33. Tong, L.W., Chen, K.P., Xu, G.W. and Zhao, X.L. (2019), "Formulae for hot-spot stress concentration factors of concrete-filled CHS T-joints based on experiments and FE analysis", Thin-Wall. Struct., 136, 113-128. https://doi.org/10.1016/j.tws.2018.12.013.
  34. UK Department of Energy (DoE). (1983), "Background notes to the fatigue guidance of offshore tubular joints".
  35. UKOSRP I final report UKOSRPI I, (1980).
  36. Wordsworth, A.C. (1979), "Stress concentration at tubular Y and oblique X joints Contract No. 62/04150343".
  37. Xu, F., Chen, J., and Jin, W. L. (2015), "Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading", Thin-Wall. Struct., 93, 149-157. https://doi.org/10.1016/j.tws.2015.03.019.
  38. Xu, X., Shao, Y., Gao, X. and Mohamed, H.S. (2022), "Stress concentration factor (SCF) of CHS gap TT-joints reinforced with CFRP", Ocean Eng., 247, 110722. https://doi.org/10.1016/j.oceaneng.2022.110722.
  39. Yang, K., Zhu, L., Bai, Y., Sun, H. and Wang, M. (2018), "Strength of external-ring-stiffened tubular X-joints subjected to brace axial compressive loading", Thin-Wall. Struct., 133, 17-26. https://doi.org/10.1016/j.tws.2018.09.030.
  40. Zhao, L., Zhu, L., Sun, H., Yang, L. and Chen, X. (2020), "Experimental and numerical investigation of axial tensile strength of CHS X-joints reinforced with external stiffening rings", Int. J. Steel Struct., 20(3), 1003-1013. https://doi.org/10.1007/s13296-020-00337-1.
  41. Zhao, X.L., Herion, S., Packer, J.A., Puthli, R., Sedlacek, G., Wardenier, J. and Yeomans, N. (2000), "Design guide for circular and rectangular hollow section joints under fatigue loading. CIDECT, TUV".
  42. Zhu, L., Yang, K., Bai, Y., Sun, H. and Wang, M. (2017), "Capacity of steel CHS X-joints strengthened with external stiffening rings in compression", Thin-Wall. Struct., 115, 110-118. https://doi.org/10.1016/j.tws.2017.02.013.