Structural Engineering and Mechanics

  • 제85권2호
  • /
  • Pages.265-274
  • /
  • 2023
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Innovative simulation method of the spherical steel bearing applied to high-speed railway bridges

  • Renkang, Hu (School of Civil Engineering, Central South University) ;
  • Shangtao, Hu (School of Civil Engineering, Central South University) ;
  • Xiaoyu, Zhang (School of Civil Engineering, Central South University) ;
  • Menggang, Yang (School of Civil Engineering, Central South University) ;
  • Na, Zheng (Luoyang Sunrui Special Equipment Co., Ltd.)
  • 투고 : 2021.06.11
  • 심사 : 2023.01.06
  • 발행 : 2023.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

The spherical steel bearings (SSBs) has been gradually replaced traditional rubber bearings and extensively applied to high-speed railway (HSR) bridges in China, due to their durability and serviceability. Nevertheless, SSB is generally simplified to the ordinary constraints in the finite element model, which cannot reflect its detailed mechanical characteristics, especially its seismic performance. To provide a more precisely simulation, an innovative and simplified finite element simulation method is proposed and the combined element group is developed in ANSYS. The primary parameters were determined by means of the performance test of SSB. The finite element model of SSB applied to a single-span HSR simply supported girder bridge was established through the proposed method. The seismic performance of the SSB was further investigated. A shake table test was conducted to evaluate the accuracy of the proposed simulation method. It is found that the numerical results could have a good agreement with the experiment, namely, the proposed method is feasible and efficient.

키워드

과제정보

The research described in this paper was financially supported by the National Natural Science Foundation of China (grant numbers 51978667 and 52278232), the Science and Technology Research and Development Program Project of China State Railway Group Co., Ltd. (Major Special Project, No. 2021-Special-04-2) and Luoyang Sunrui Special Equipment Co., Ltd.

참고문헌

  1. Campbell, T.I., Green, M.F., Koppens, N.C. and Agarwal, A.C. (1997), "Pressure distribution in sliding interface of spherical bridge bearing", Transp. Res. Rec., 1594(1), 154-162. https://doi.org/10.3141%2F1594-17. https://doi.org/10.3141%2F1594-17
  2. Castaldo, P. and Amendola, G. (2021), "Optimal DCFP bearing properties and seismic performance assessment in nondimensional form for isolated bridges", Earthq. Eng. Struct. Dyn., 50(9), 2442-2461. https://doi.org/10.1002/eqe.3454.
  3. Castaldo, P., Palazzo, B., Alfano, G. and Palumbo, M.F. (2018), "Seismic reliability-based ductility demand for hardening and softening structures isolated by friction pendulum bearings", Struct. Control Hlth. Monit., 25(11), e2256. https://doi.org/10.1002/stc.2256.
  4. Castaldo, P., Ripani, M. and Priore, R.L. (2018), "Influence of soil conditions on the optimal sliding friction coefficient for isolated bridges", Soil Dyn. Earthq. Eng., 111, 131-148. https://doi.org/10.1016/j.soildyn.2018.04.056.
  5. Chen, Z.W., Han, Z.L., Zhai, W.M. and Yang, J.Zh. (2019), "TMD design for seismic vibration control of high-pier bridges in Sichuan-Tibet Railway and its influence on running trains", Vehicle Syst. Dyn., 57(2), 207-225. https://doi.org/10.1080/00423114.2018.1457793.
  6. Deringol, A.H. and Guneyisi, E.M. (2019), "Effect of friction pendulum bearing properties on behaviour of buildings subjected to seismic loads", Soil Dyn. Earthq. Eng., 125, 105746. https://doi.org/10.1016/j.soildyn.2019.105746.
  7. Fan, J., Long, X. and Zhang, Y. (2015), "Optimum design of lead-rubber bearing system with uncertainty parameters", Struct. Eng. Mech., 56(6), 959-982. http://doi.org/10.12989/sem.2015.56.6.959.
  8. Hameed, A., Koo, M.S., Do, T.D. and Jeong, J.H. (2008), "Effect of lead rubber bearing characteristics on the response of seismic-isolated bridges", KSCE J. Civil Eng., 12(3), 187-196. https://10.1007/s12205-008-0187-9.
  9. Han, Q., Wen, J., Du, X., Zhong, Z. and Hao, H. (2018), "Nonlinear seismic response of a base isolated single pylon cable-stayed bridge", Eng. Struct., 175, 806-821. https://doi.org/10.1016/j.engstruct.2018.08.077.
  10. He, X.H., Wu, T., Zou, Y.F., Chen, Y.F., Guo, H. and Yu, Z.W. (2017), "Recent developments of high-speed railway bridges in China", Struct. Infrastr. E, 13(12), 1584-1595. https://doi.org/10.1080/15732479.2017.1304429.
  11. Hedayati Dezfuli, F. and Alam, M.S. (2018), "Smart lead rubber bearings equipped with ferrous shape memory alloy wires for seismically isolating highway bridges", J. Earthq. Eng., 22(6), 1042-1067. https://doi.org/10.1080/13632469.2016.1269692.
  12. Hong, X.M., Guo, W.H. and Wang, Z.H. (2020), "Seismic analysis of coupled high-speed train-bridge with the isolation of friction pendulum bearing", Adv. Civil Eng., 2020, Article ID 8714174. https://doi.org/10.1155/2020/8714174.
  13. Huang, Y., Wang, J.J. and Han, P. (2010), "Seismic response analysis of continuous bridge staking account of bearing failure", Chin. Civil Eng. J., 43(S2), 217-223. https://doi:10.15951/j.tmgcxb.2010.s2.015.
  14. Hwang, J.S., Wu, J.D., Pan, T.C. and Yang, G. (2002), "A mathematical hysteretic model for elastomeric isolation bearings", Earthq. Eng. Struct. Dyn., 31(4), 771-789. http://doi.org/10.1002/eqe.120
  15. Jiang, L.Z, Cao, S.S. and Wei, B. (2019), "Effects of friction-based fixed bearings on seismic performance of high-speed railway simply supported girder bridges and experimental validation", Adv. Struct. Eng., 22(3), 687-701. https://doi.org/10.1177/1369433218798120.
  16. Karabork, T. (2011), "Performance of multi-storey structures with high damping rubber bearing base isolation systems", Struct. Eng. Mech., 39(3), 399-410. http://doi.org/10.12989/sem.2011.39.3.399.
  17. Khan, A., Bhuiyan, M. and Ali, S.B. (2019), "Seismic responses of a bridge pier isolated by high damping rubber bearing: Effect of rheology modeling", Int. J. Civil Eng., 17(11), 1767-1783. https://doi.org/10.1007/s40999-019-00454-x.
  18. Kim, D., Yi, J.H., Seo, H.Y. and Chang, C. (2008), "Earthquake risk assessment of seismically isolated extradosed bridges with lead rubber bearings", Struct. Eng. Mech., 29(6), 689-708. http://doi.org/10.12989/sem.2008.29.6.689.
  19. Koh, C.G. and Kelly, J.M. (1988), "A simple mechanical model for elastomeric bearings used in base isolation", Int. J. Mech. Sci., 30(12), 933-943. https://doi.org/10.1016/0020-7403(88)90075-6.
  20. Li, X.L. and Shi, Y. (2019), "Seismic design of bridges against near-fault ground motions using combined seismic isolation and restraining systems of LRBs and CDRs", Shock Vib., 2019, Article ID 4067915. https://doi.org/10.1007/s40999-019-00454-x.
  21. Misini, M., Ristic, J., Guri, Z., Ristic, D. and Pllana, N. (2020), "Upgrading seismically isolated bridges with space-flange energy-dissipation devices", Proc. Inst. Civil Eng.-Struct. Build., 174(8), 655-669. https://doi.org/10.1680/jstbu.18.00231.
  22. Oh, J., Jang, C. and Kim, J.H. (2015), "A study on the characteristics of bridge bearings behavior by finite element analysis and model test", J. Vibroeng., 17(5), 2559-2571. https://doi.org/10.11112/jksmi.2014.18.5.096.
  23. Roeder, C.W., Stanton, J.F. and Campbell, T.I. (1995), "Rotation of high load multirotational bridge bearings", J. Struct. Eng., 121(4), 747-756. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(747).
  24. Ruano, P.C. and Strauss, A. (2018), "An experimental study on unbonded circular fiber reinforced elastomeric bearings", Eng. Struct., 177, 72-84. https://doi.org/10.1016/j.engstruct.2018.09.062.
  25. Ryan, K.L., Kelly, J.M. and Chopra, A.K. (2005), "Nonlinear model for lead-rubber bearings including axial-load effects", J. Eng. Mech., 131(12), 1270-1278. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:12(1270).
  26. Seo, J., Linzell, D.G. and Hu, J.W. (2013), "Nonlinear seismic response analysis of curved and skewed bridge system with spherical bearings", Adv. Civil Eng., 2013, Article ID 248575. https://doi.org/10.1155/2013/248575.
  27. Tiong, P.L., Kelly, J.M. and Or, T.T. (2017), "Design approach of high damping rubber bearing for seismic isolation", Smart Struct. Syst., 20(3), 303-309. https://doi.org/10.12989/sss.2017.20.3.303.
  28. Wang, G.X., Ding, Y.L., Guo, H. and Zhao, X.X. (2018), "Safety evaluation of the wear life of high-speed railway bridge bearings by monitoring train-induced dynamic displacements", Shock Vib., 2018, Article ID 6479480. https://doi.org/10.1155/2018/6479480.
  29. Wang, J.Q., Li, S., Dezfuli, F.H. and Alam, M.S. (2019), "Sensitivity analysis and multi-criteria optimization of SMA cable restrainers for longitudinal seismic protection of isolated simply supported highway bridges", Eng. Struct., 189, 509-522. https://doi.org/10.1016/j.engstruct.2019.03.091.
  30. Wei, B., Yang, T.H., Jiang, L.Z. and He, X.H. (2018), "Effects of friction-based fixed bearings on the seismic vulnerability of a high-speed railway continuous bridge", Adv. Struct. Eng., 21(5), 643-657. https://doi.org/10.1177%2F1369433217726894. https://doi.org/10.1177%2F1369433217726894
  31. Wei, B., Zuo, C.J., He, X.H., Jiang, L.Z. and Wang, T. (2018), "Effects of vertical ground motions on seismic vulnerabilities of a continuous track-bridge system of high-speed railway", Soil Dyn. Earthq. Eng., 115, 281-290. https://doi.org/10.1016/j.soildyn.2018.08.022.
  32. Yan, B., Dai, G.L. and Hu, N. (2015), "Recent development of design and construction of short span high-speed railway bridges in China", Eng. Struct., 100, 707-717. https://doi.org/10.1016/j.engstruct.2015.06.050.
  33. Yang, M.G., Meng, D.L., Gao, Q., Zhu, Y. and Hu, S.T. (2019), "Experimental study on transverse pounding reduction of a high-speed railway simply-supported girder bridge using rubber bumpers subjected to earthquake excitations", Eng. Struct., 196, 109290. https://doi.org/10.1016/j.engstruct.2019.109290.
  34. Yu, Z.W., Li, H.Y., Wei, B., Jiang, L.Z. and Mao, J.F. (2018), "Numerical analysis on longitudinal seismic responses of high-speed railway bridges isolated by friction pendulum bearings", J. Vibroeng., 20(4), 1748-1760. https://doi.org/10.1016/j.engstruct.2018.08.077.
  35. Zou, S., Wenliuhan, H. and Zhou, F.L. (2019), "Shaking table test of a high-speed railway bridge with a new isolation system", Eng. Struct., 196, 109315. https://doi.org/10.1016/j.engstruct.2019.109315.