DOI QR코드

DOI QR Code

Moment-Curvature behavior of steel and GFRP reinforced beam using AE and DIC Techniques

  • Sharma, Gaurav (Civil Engineering Department, Amity University) ;
  • Sharma, Shruti (Civil Engineering Department, Thapar Institute of Engineering and Technology) ;
  • Sharma, Sandeep K. (Mechanical Engineering Department, Thapar Institute of Engineering and Technology)
  • 투고 : 2021.10.25
  • 심사 : 2022.09.15
  • 발행 : 2022.10.25

초록

Using non-destructive Acoustic Emission (AE) and optical Digital Image Correlation (DIC) methods, the moment-curvature behavior of steel and GFRP bars reinforced concrete beams under flexure was explored in this study. In the tension zone, laboratory studies were carried out on steel-RC and GFRP-RC beams with varying percentages of longitudinal reinforcement ratios of 0.33 %, 0.52%, and 1.11%. The distinct mechanism of cracking initiation and fracture progression of failure in steel-RC and GFRP-RC beams were effectively correlated and picked up using AE waveform characteristics of the number of AE hits and their amplitudes, AE energy as well as average frequency and duration. AE XY event plots and longitudinal strain profiles using DIC gives an online and real-time visual display of progressive AE activity and strains respectively to efficaciously depict the crack evolution and their advancement in steel-RC and GFRP-RC beams. They display a close matching with the micro and macro-cracks visually observed in the actual beams at various stages of loading.

키워드

과제정보

The authors would like to thank the Thapar Institution of Engineering and Technology (T.I.E.T) Civil Engineering Department for their cooperation in conducting the experiments at the institute laboratory. The support from the Department of Science and Technology, Government of India, ECR Grant No: SERB/F/1265/2017-2018, is gratefully acknowledged.

참고문헌

  1. ACI 318 (2008), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, MI, USA.
  2. ACI 440.1R-06 (2006), Guide for the Design and Construction of Concrete Reinforced with FRP Bar, American Concrete Institute, Farmington Hills, MI, USA.
  3. Aggelis, D.G., Verbruggen, S., Tsangouri, E., Tysmans, T. and Van Hemelrijck, D. (2013), "Characterization of mechanical performance of concrete beams with external reinforcement by acoustic emission and digital image correlation", Constr. Build. Mater., 47(10), 1037-1045. https://doi.org/10.1016/j.conbuildmat.2013.06.005.
  4. Aghlara, R., Abdullah, R. and Md Tahir, M. (2012), "Mapping full-field bond stress distribution on concrete using digital image correlation results", J. Appl. Sci., 12(21), 2235-2243. https://doi.org/10.1177/0731684414541017.
  5. Ascione, L., Mancusi, G. and Spadea, S. (2010), "Flexural behaviour of concrete beams reinforced with GFRP bars", Strain, 46(5), 460-469. https://doi.org/10.1111/j.1475-1305.2009.00662.x.
  6. ASTM D7205 (2006), Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars, ASTM International, West Conshohocken, Pennsylvania, USA.
  7. Bhowmik, S., Dubey, S. and Ray, S. (2019), "Investigation on fracture processes of concrete", Frattura ed Integrita Strutturale, 13(48), 419-428. https://doi.org/10.3221/IGF-ESIS.48.40.
  8. Blaber, J., Adair, B. and Antoniou, A. (2015), "Ncorr: open-source 2D digital image correlation matlab software", Exp. Mech., 55(6), 1105-1122. https://doi.org/10.1007%2Fs11340-015-0009-1. https://doi.org/10.1007%2Fs11340-015-0009-1
  9. De Sutter, S., Verbruggen, S., Tysmans, T. and Aggelis, D.G. (2017), "Fracture monitoring of lightweight composite-concrete beams", Compos. Struct., 167(2), 11-19. https://doi.org/10.1016/j.compstruct.2017.01.024.
  10. Di Benedetti, M., Loreto, G., Matta, F. and Nanni, A. (2019), "Acoustic emission monitoring of reinforced concrete under accelerated corrosion", J. Mater. Civil Eng., 25(8) 1022-1029. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000647.
  11. Dulude, C., Ahmed, E., El-Gamal, S. and Benmokrane, B. (2011), "Testing of large-scale two-way concrete slabs reinforced with GFRP bars", Adv. FRP Compos. Civil Eng., 287-291.
  12. Eaton, M. (2007), Acoustic Emission (AE) Monitoring of Buckling and Failure in Carbon Fibre Composite Structures, Cardiff University, UK.
  13. Fayyad, T.M. and Lees, J.M. (2017), "Experimental investigation of crack propagation and crack branching in lightly reinforced concrete beams using digital image correlation", Eng. Fract. Mech., 182(1), 487-505. https://doi.org/10.1016/j.engfracmech.2017.04.051.
  14. Goldston, M., Remennikov, A. and Sheikh, M.N. (2016), "Experimental investigation of the behaviour of concrete beams reinforced with GFRP bars under static and impact loading", Eng. Struct., 113(2), 220-232. https://doi.org/10.1016/j.engstruct.2016.01.044.
  15. Hu, B. and Wu, Y.F. (2017), "Quantification of shear cracking in reinforced concrete beams", Eng. Struct., 147(10), 666-678. https://doi.org/10.1016/j.engstruct.2017.06.035.
  16. IS 10262 (2009), Indian Standard Code for Concrete Mix Proportioning Guidelines (First Revision), Bureau of Indian Standards, New Delhi, India.
  17. IS 1708 (2008), High Strength Deformed Steel Bars and Wires for Concrete Reinforcement-Specification, Bureau of Indian Standards, New Delhi, India.
  18. Jiang, Y., Jin, Z., Zhao, T., Chen, Y. and Chen, F. (2017), "Strain field of reinforced concrete under accelerated corrosion by digital image correlation technique", J. Adv. Concrete Technol., 15(7), 290-299. https://doi.org/10.3151/jact.15.290.
  19. Krasniqi, C., Kabashi, N., Krasniqi, E. and Kaqi, V. (2018), "Comparison of the behavior of GFRP reinforced concrete beams with conventional steel bars", Pollack Periodica, 13(3), 141-150. https://doi.org/10.1556/606.2018.13.3.14.
  20. Manalo, A., Benmokrane, B., Park, K.T. and Lutze, D. (2014), "Recent developments on FRP bars as internal reinforcement in concrete structures", Concrete Australia, 40(2), 46-56.
  21. Ohtsu, M. and Suzuki, T. (2005), "Quantitative damage estimation of concrete core based on AE rate process analysis", J. AE, 22(1), 30-38.
  22. Ohtsu, M., Mori, K. and Kawasaki, Y. (2011), "Corrosion process and mechanisms of corrosion-induced cracks in reinforced concrete identified by AE analysis", Strain, 47, 179-186. https://doi.org/10.1111/j.1475-1305.2010.00754.x.
  23. Prem, P.R. and Murthy, A.R. (2017), "Acoustic emission monitoring of reinforced concrete beams subjected to four-point-bending", Appl. Acoust., 117(2), 28-38. https://doi.org/10.1016/j.apacoust.2016.08.006.
  24. Ramos, T., Furtado, A., Eslami, S., Alves, S., Rodrigues, H., Arede, A., ... & Moreira, P.M.G.P. (2015), "2D and 3D digital image correlation in civil engineering-measurements in a masonry wall", Procedia Eng., 114(5), 215-222. https://doi.org/10.1016/j.proeng.2015.08.061.
  25. Roberts, T. and Talebzadeh, M. (2003), "Acoustic emission monitoring of fatigue crack propagation", J. Constr. Steel Res., 59(6), 695-712. https://doi.org/10.1016/S0143-974X(02)00064-0.
  26. Sagar, R.V. (2017), "Acoustic emission characteristics of reinforced concrete beams with varying percentage of tension steel reinforcement under flexural loading", Case Stud. Constr. Mater., 6(1), 162-176. https://doi.org/10.1016/j.cscm.2017.01.002.
  27. Saikia, B., Kumar, P., Thomas, J., Rao, K.N. and Ramaswamy, A. (2007), "Strength and serviceability performance of beams reinforced with GFRP bars in flexure", Constr. Build. Mater., 21(8), 1709-1719. https://doi.org/10.1016/j.conbuildmat.2006.05.021.
  28. Saleh, Z., Goldston, M., Remennikov, A.M. and Sheikh, M.N. (2019), "Flexural design of GFRP bar reinforced concrete beams: An appraisal of code recommendations", J. Build. Eng., 25(6), 100794. https://doi.org/10.1016/j.jobe.2019.100794.
  29. Shah, S.G. and Chandra Kishen, J.M. (2011), "Fracture properties of concrete-concrete interfaces using digital image correlation", Exp. Mech., 51(3), 303-313. https://doi.org/10.1007/s11340-010-9358-y
  30. Sharma, A., Sharma, S., Sharma, S. and Mukherjee, A. (2018), "Monitoring invisible corrosion in concrete using a combination of wave propagation techniques", Cement Concrete Compos., 90(7), 89-99. https://doi.org/10.1016/j.cemconcomp.2018.03.014.
  31. Sharma, G., Sharma, S. and Sharma, S.K. (2020), "Monitoring structural behaviour of concrete beams reinforced with steel and GFRP bars using acoustic emission and digital image correlation techniques", Struct. Infrastr. Eng., 22(10), 1-16. https://doi.org/10.1080/15732479.2020.1836661.
  32. Sharma, G., Sharma, S. and Sharma, S.K. (2021), "Fracture monitoring of steel and GFRP reinforced concrete beams using acoustic emission and digital image correlation techniques", Struct. Concrete, 22(4), 1962-1976. https://doi.org/10.1002/suco.202000650.
  33. Shih, M.H. and Sung, W.P. (2013), "Application of digital image correlation method for analysing crack variation of reinforced concrete beams", Sadhana, 38(4), 723-741. https://doi.org/10.1007/s12046-013-0141-5.
  34. Sudarsanan, N., Arulrajah, A., Karpurapu, R. and Amrithalingam, V. (2019), "Digital image correlation technique for measurement of surface strains in reinforced asphalt concrete beams under fatigue loading", J. Mater. Civil Eng., 31(8), 04019135. https://doi.org/0401913510.1061/(ASCE)MT.1943-5533.0002743.
  35. Verbruggen, S., Aggelis, D.G., Tysmans, T. and Wastiels, J. (2014), "Bending of beams externally reinforced with TRC and CFRP monitored by DIC and AE", Compos. Struct., 112(2), 113-121. https://doi.org/10.1016/j.compstruct.2014.02.006.
  36. Verbruggen, S., De Sutter, S., Iliopoulos, S., Aggelis, D.G. and Tysmans, T. (2016), "Experimental structural analysis of hybrid composite-concrete beams by digital image correlation (DIC) and acoustic emission (AE)", J. Nondestr. Eval., 35(1), 2. https://doi.org/10.1007%2Fs10921-015-0321-9. https://doi.org/10.1007%2Fs10921-015-0321-9
  37. Vona, M. and Manganelli, B. (2022), "The historical and cultural value of RC constructions and the main critical issues for rehabilitation", Infrastruct., 7(3), 35. https://doi.org/10.3390/infrastructures7030035.
  38. Wilbur, P.C. (2011), Damage Identification in Reinforced Concrete Beams using Digital Image Correlation, University of Windsor, Published Heritage Branch, Ontario, Canada.
  39. Wu, Z., Wang, X., Zhao, X. and Noori, M. (2014), "State-of-the-art review of FRP composites for major construction with high performance and longevity", Int. J. Sustain. Mater. Struct. Syst., 1(3), 201-231. https://doi.org/10.1504/IJSMSS.2014.062757.
  40. Zhang, J.Z. and Zhou, X.P. (2020), "Forecasting catastrophic rupture in brittle rocks using precursory AE time series", J. Geophys. Res.: Solid Earth, 125(8), e2019JB019276. https://doi.org/10.1029/2019JB019276
  41. Zhang, J.Z., Zhou, X.P., Zhou, L.S. and Berto, F. (2019), "Progressive failure of brittle rocks with non-isometric flaws: Insights from acousto-optic-mechanical (AOM) data", Fatig. Fract. Eng. Mater. Struct., 42(8), 1787-1802. https://doi.org/10.1111/ffe.13019.
  42. Zhang, R., Castel, A. and Francois, R. (2010), "Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process", Cement Concrete Res., 40(3), 415-425. https://doi.org/10.1016/j.cemconres.2009.09.026.
  43. Zhou, X.P. and Zhang, J.Z. (2021), "Damage progression and acoustic emission in brittle failure of granite and sandstone", Int. J. Rock Mech. Min. Sci., 143, 104789. https://doi.org/10.1016/j.ijrmms.2021.104789.
  44. Zhou, X.P., Lian, Y.J., Wong, L.N.Y. and Berto, F. (2018), "Understanding the fracture behavior of brittle and ductile multi-flawed rocks by uniaxial loading by digital image correlation", Eng. Fract. Mech., 199, 438-460. https://doi.org/10.1016/j.engfracmech.2018.06.007.
  45. Zhou, X.P., Wang, Y.T., Zhang, J.Z. and Liu, F.N. (2019), "Fracturing behavior study of three-flawed specimens by uniaxial compression and 3D digital image correlation: Sensitivity to brittleness", Rock Mech. Rock Eng., 52(3), 691-718. https://doi.org/10.1007/s00603-018-1600-4.
  46. Zhou, X.P., Zhang, J.Z., Qian, Q.H. and Niu, Y. (2019), "Experimental investigation of progressive cracking processes in granite under uniaxial loading using digital imaging and AE techniques", J. Struct. Geol., 126, 129-145. https://doi.org/10.1016/j.jsg.2019.06.003.
  47. Zhu, H., Wu, G., Shi, J., Liu, C. and He, X. (2014), "Digital image correlation measurement of the bond-slip relationship between fiber-reinforced polymer sheets and concrete substrate", J. Reinf. Plast. Compos., 33(17), 1590-1603. https://doi.org/10.1177/0731684414541017.