Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Induction of Electromagnetic Field by Partitioned Coils on Fracture Energy of Steel Fiber Reinforced Mortar

분할된 코일을 이용한 전자기장 유도가 강섬유보강몰탈의 파괴에너지에 미치는 영향

  • Received : 2022.08.23
  • Accepted : 2022.09.23
  • Published : 2022.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this experimental study, the effect of continuously changing the position of electromagnetic force using several coils and a relay switch on fracture energy was investigated. Normal mortar and steel slag mortar specimens in which 50 % and 100 % of sand was replaced with steel slag were cast and exposed to electromagnetic field. The electric field was induced by one coil without a relay switch as an existing method and by partitioning the coil and continuously changing the position using a relay switch. The fracture energy was calculated from the load-vertical displacement curve obtained from the experiment and compared with each other. As a result of the experiment, it was confirmed that the method of partitioning the coil and changing the position of electromagnetic force by using a relay switch is effective in increasing the fracture energy even if the same amount of power is used.

본 실험적 연구에서는 수개의 코일과 릴레이 스위치를 활용하여 전자기력 위치를 지속적으로 교란하는 방법이 파괴에너지에 미치는 영향을 분석하였다. 마이크로 강섬유와 일반 후크 강섬유로 보강된 일반몰탈, 모래의 50 %와 100 %를 스틸슬래그로 치환한 스틸슬래그 몰탈을 제작하고, 전자기에 노출하였다. 전자기력이 유도방식은 기존의 방식인 한 개의 코일을 사용하고 릴레이 스위치 없이 일정한 전자기력을 유도하는 기존의 방법과 이를 상과 하로 두 개로, 상중하 세 개로 분할하고 릴레이 스위치를 두어 지속적으로 변화시키는 방법으로 하였다. 실험결과로부터 획득한 하중-수직변위곡선으로부터 파괴에너지를 계산하고 이를 상호 비교하였다. 실험결과, 동일한 전력량을 사용하더라도 코일을 분리하고 릴레이 스위치를 활용하여 전자기력을 교란하는 방식이 파괴에너지를 증가시키는데 효과적인 것으로 확인되었다.

Keywords

Acknowledgement

이 논문은 한국연구재단 이공분야기초연구사업 중 기본연구지원사업(과제번호: 2020R1F1A1076566)의 연구비 지원으로 수행, 작성되었으며, 이에 감사합니다.

References

  1. Abdallah, S., Rees, D.W., Ghaffar, S.H., Fan, M. (2018). Understanding the effects of hooked-end steel fibre geometry on the uniaxial tensile behaviour of self-compacting concrete, Construction and Building Materials, 178, 484-494. https://doi.org/10.1016/j.conbuildmat.2018.05.191
  2. Blanco, A., Pujadas, P., De la Fuente, A., Cavalaro, S.H.P., Aguado, A. (2015). Assessment of the fibre orientation factor in SFRC slabs, Composites Part B: Engineering, 68, 343-354. https://doi.org/10.1016/j.compositesb.2014.09.001
  3. Ferrandez, D., Saiz, P., Moron, C., Dorado, M. G., Moron, A. (2019). Inductive method for the orientation of steel fibers in recycled mortars, Construction and Building Materials, 222, 243-253. https://doi.org/10.1016/j.conbuildmat.2019.06.113
  4. Hajforoush, M., Kheyroddin, A., Rezaifar, O. (2020). Investigation of engineering properties of steel fiber reinforced concrete exposed to homogeneous magnetic field, Construction and Building Materials, 252, 119064. https://doi.org/10.1016/j.conbuildmat.2020.119064
  5. Huang, H., Gao, X., Li, L., Wang, H. (2018). Improvement effect of steel fiber orientation control on mechanical performance of UHPC, Construction and Building Materials, 188, 709-721. https://doi.org/10.1016/j.conbuildmat.2018.08.146
  6. Javahershenas, F., Gilani, M.S., Hajforoush, M. (2021). Effect of magnetic field exposure time on mechanical and microstructure properties of steel fiber-reinforced concrete (SFRC), Journal of Building Engineering, 35, 101975. https://doi.org/10.1016/j.jobe.2020.101975
  7. Kazemi, M.T., Fazileh, F., Ebrahiminezhad, M.A. (2007). Cohesive crack model and fracture energy of steel-fiber-reinforcedconcrete notched cylindrical specimens, Journal of Materials in Civil Engineering, 19(10), 884-890. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:10(884)
  8. Li, B., Xu, L., Shi, Y., Chi, Y., Liu, Q., Li, C. (2018). Effects of fiber type, volume fraction and aspect ratio on the flexural and acoustic emission behaviors of steel fiber reinforced concrete, Construction and Building Materials, 181, 474-486. https://doi.org/10.1016/j.conbuildmat.2018.06.065
  9. Michels, J., Gams, M. (2016). Preliminary study on the influence of fibre orientation in fibre reinforced mortars, Gradevinar, 68(8), 645-655.
  10. Manaf, A.F.A., Shahidan, S., Mazlan, M.F.N., Ramasamy, S., Zuki, S.S.M., Azmi, M.A.M., ... Rahim, M.A. (2021). Strength Capacity of Concrete Using Micro Steel Fiber: A Review, IOP Conference Series: Materials Science and Engineering, 1144(1), 012023. https://doi.org/10.1088/1757-899X/1144/1/012023
  11. Mu, R., Qiu, X., Zhao, Q., Li, H. (2015). Aligned steel fibre reinforced cement based composites (I), orientation control of steel fibres, Journal of Building Materials, 18(2), 208-213.
  12. Mu, R., Xue, Y., Qing, L., Li, H., Zhao, Y., Zhou, J., Su, J. (2019). Preparation and mechanical performance of annularly aligned steel fiber reinforced cement-based composite pipes, Construction and Building Materials, 211, 167-173. https://doi.org/10.1016/j.conbuildmat.2019.03.146
  13. Shin, S.C., Mukharromah, N.I., Moon, D.Y., Park, D.W. (2022). Double punch tensile strength of cylindrical mortar with steel fibers aligned in circumferential direction by electro-magnetic field, Journal of the Korean Recycled Construction Resources Institute, 10(1), 40-47. https://doi.org/10.14190/JRCR.2022.10.1.40