Steel and Composite Structures

  • 제44권2호
  • /
  • Pages.271-281
  • /
  • 2022
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Field trial of expandable profile liners in a deep sidetrack well section and optimizable schemes approach for future challenges

  • Zhao, Le (Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Institute of Deep Earth Sciences and Green Energy, College of Civil and Transportation Engineering, Shenzhen University) ;
  • Tu, Yulin (SINOPEC Tech Middle East LLC) ;
  • Xie, Heping (Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Institute of Deep Earth Sciences and Green Energy, College of Civil and Transportation Engineering, Shenzhen University) ;
  • Gao, Mingzhong (Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Institute of Deep Earth Sciences and Green Energy, College of Civil and Transportation Engineering, Shenzhen University) ;
  • Liu, Fei (College of Emergency Management, Nanjing Tech University)
  • 투고 : 2021.09.27
  • 심사 : 2022.07.07
  • 발행 : 2022.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study discusses challenges of running expandable profile liners (EPLs) to isolate trouble zones in directional section of a deep well, and summary the expandable profile liner technology (EPLT) field trial experience. Technically, the trial result reveals that it is feasible to apply the EPLT solving lost-circulation control problem and wellbore instability in the deep directional section. Propose schemes for optimizing the EPLT operation procedure to break through the existing bottleneck of EPLT in the deep directional section. Better-performing transition joints are developed to improve EPL string reliability in high borehole curvature section. High-performing and reliable expanders reduce the number of trips, offer excellent mechanical shaping efficiency, simplify the EPLT operation procedure. Application of the expansion and repair integrated tool could minimize the risk of insufficient expansion and increase the operational length of the EPL string. The new welding process and integrated automatic welding equipment improve the welding quality and EPL string structural integrity. These optimization schemes and recent new advancements in EPLT can bring significant economic benefits and promote the application of EPLT to meet future challenges.

키워드

과제정보

This paper has been supported by a project of the SINOPEC Research Institute of Petroleum Engineering. In addition, support from the program for Shenzhen National Science Fund for Distinguished Young Scholars (RCJC 20210706091948015) is gratefully acknowledged.

참고문헌

  1. Abaqus (2020), Velizy-Villacoublay, France: Dassault Systemes.
  2. Abdrakhmanov, G.S., Khamityanov, N.K., Vildanov, N.N. (2006), "New expandable-profile liners used in iran", China, Tatarstan. Oil Gas J., 114(13), 45-50.
  3. Agata, J., Tsuru, E., Sawamura, M., Asahi, H. and Tsugihara, H. (2013), "An experimental and numerical approach to the prediction of expandability and collapse resistance for solid expandable tubulars", SPE J., 18(03), 406-415. https://doi.org/10.2118/139939-PA.
  4. Al-Karawi, H. (2022), "Material and residual stress improvement in S355 welded structural steel using mechanical and thermal post-weld treatment methods", Steel Construct., 15, 51-54. https://doi.org/10.1002/stco.202100012.
  5. Albattat R. and Hoteit H. (2020), "A semi-analytical approach to model drilling fluid leakage into fractured formation", Rheologica Acta. 60, 353-370. http://dx.doi.org/10.1007/s00397-021-01275-3.
  6. Bai Y. G., Liu C.T. and Sun J.S. (2022), "High temperature resistant polymer gel as lost circulation material for fractured formation during drilling", Colloids Surfaces Physicocheemic. Eng. Aspects, 637. https://doi.org/10.1016/j.colsurfa.2021.128244.
  7. Cai, W.J, Deng, J.G. and Feng, Y.C. (2022), "Developing a geomechanics-modeling based method for lost circulation risk assessment: A case study in Bohai Bay, China", J. Petroleum Sci. Eng., 210. https://doi.org/10.1016/j.petrol.2021.110045.
  8. Feng Y.C. and Gray K.E. (2018), "Modeling lost circulation through drilling-induced fractures", SPE J., 23, 205-223. https://doi.org/10.2118/187945-PA.
  9. Fernandez-Perez J., Diaz-Alvarez J., Miguelez M.H. and Cantero J.L. (2021), "Combined analysis of wear mechanisms and delamination in CFRP drilling", Compos. Struct., 255, 112774. https://doi.org/10.1016/j.compstruct.2020.112774.
  10. Gao, M.Z., Yang, B.G., Xie, J., Ye, S.Q., Liu, J.J., Liu, Y.T. and Zhou, X.M. (2022), "The mechanism of microwave rock breaking and its potential application to rock-breaking technology in drilling", Petrol. Sci., https://doi.org/10.1016/j.petsci.2021.12.031.
  11. Hu, Y., Tu, Y. and Tao, X. (2013), "Application of the U149.2 mm Expandable Bellows in Sidetracked Wells of Tahe Oilfield", China Petrol. Machin. 41(1), 27-30.
  12. Kim S.E. and Vu Q.V. (2020), "Effect of residual stress and geometric imperfection on the strength of steel box girders", Steel Compos. Struct., 34(3), 423-440. http://dx.doi.org/10.12989/scs.2020.34.3.423.
  13. Kim, S.E., Choi, J.H., Pham, T.H., Truong, V.H., Kong, Z. and Vu, Q.V. (2020), "Behavior of composite CFST beam-concrete column joints", Steel Compos. Struct., 37(1), 75-90. http://dx.doi.org/10.12989/scs.2020.37.1.075.
  14. Li, J., Li, S., Pan, L., Gao, W., Sun, J. and Qin, M. (2021), "Thiefzone plugging mechanism and application of calcite particles in fractured formations", J. Petroleum Explor. Product. Technol., 11(6), 2823-2832. https://doi.org/10.1007/s13202-021-01205-2.
  15. Mardanirad S., Wood D. A. and Zakeri H. (2021), "The application of deep learning algorithms to classify subsurface drilling lost circulation severity in large oil field datasets", SN Appl. Sci., 3(9), 1-22. http://dx.doi.org/10.1007/s42452-021-04769-0.
  16. Mehrabian A., Jamison D.E. and Sorin G.T. (2015), "Geomechanics of lost-Circulation Events and Wellbore-Strengthening Operations", SPE J. 20, 1305-1316. https://doi.org/10.2118/174088-PA.
  17. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. http://dx.doi.org/10.12989/scs.2020.35.2.279.
  18. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.1115/1.4049942.
  19. Nasiri, A., Ghaffarkhah, A., Moraveji, M.K., Gharbanian, A. and Valizadeh, M. (2017), "Experimental and field test analysis of different loss control materials for combating lost circulation in bentonite mud", J. Nat. Gas Sci. Eng., 44, 1-8. https://doi.org/10.1016/j.jngse.2017.04.004.
  20. Peng, L.I.U., Bairu, X.I.A. and Xinghua, T.A.O. (2016), "Weld defects detection and weld's performance evaluation of solid expandable profile liner technology", Sci. Technol. Eng., 16(32), 22-27.
  21. Peng, L.I.U., Bairu, X.I.A., Xinghua, T.A.O., Yanfeng, H.U. and Yulin, T.U. (2017), "The application of solid expandable liners in directional well sections of the Daniudi gas field", Petrol. Drill. Tech., 45(2), 61-67. https://doi.org/10.11911/syztjs.201702010.
  22. Peter G. and Alessandro F. (2021), "Residual stress evolution in partial and full axisymmetric forming processes", CIRP Annals, 70(1), 227-230. https://doi.org/10.1016/j.cirp.2021.03.003.
  23. Sameer, V. and Vijay, K.D. (2021), "Optimization of process parameters of submerged arc welding by Taguchi Method", Mater. Today: Proce., 47(19), 7067-7072. https://doi.org/10.1016/j.matpr.2021.06.141.
  24. Sarfarazi V., Abharian S. and Ghorbani A., (2021), "Physical test and PFC modelling of rock pillar failure containing two neighboring joints and one hole", Smart Struct. Syst., 27(1), 123-137. http://dx.doi.org/10.12989/sss.2021.27.1.123.
  25. Sayantan D.B., Suranjit K. and Pawan K.S. (2021), "Distortion and residual stresses in thick plate weld joint of austenitic stainless steel: Experiments and analysis", J. Mater. Proce. Technol., 289, 116944. https://doi.org/10.1016/j.jmatprotec.2020.116944.
  26. Sonmez, A., Kok, M.V., Bal, B., Bagatir, G. and Gucuyener, I.H. (2021), "Comprehensive approach to torque and lost circulation problems in geothermal wells in terms of drilling fluid", Geothermics, 95, 102126. https://doi.org/10.1016/j.geothermics.2021.102126.
  27. Tabatabaei, M., Taleghani, A.D., Li, G. and Zhang, T. (2021), "Shape memory polymers as lost circulation materials for sealing wide-opened natural fractures", SPE Drilling Completion, 36(04), 931-942. https://doi.org/10.2118/205514-PA.
  28. Takhautdinov, S., Abdrakhmanov, G.S., Kaveev, K.Z. (2002), "Liners extend casing Length Without Wellbore Diameter Loss. Oil Gas J. 100(32), 41-44.
  29. Takhautdinov, S.F., Ibragimov, N.G., Abdrakhmanov, G.S. and Yusupov, I.G. (2003), "Expandable liners protect permeable zones in Russian oil wells", Oil Gas J., 101(1), 39-39.
  30. Vivas, C. and Salehi, S. (2022), "Screening of lost circulation materials for geothermal applications: Experimental study at high temperature", J. Energy Resour. Technol., 144(3). https://doi.org/10.1115/1.4053071.
  31. Wang Y.J., Kang Y.L., You L.J., Xu, C.Y., Yan X.P. and Chong L. (2021), "Multiscale formation damage mechanisms and control technology for deep tight clastic gas reservoirs", SPE J. https://doi.org/10.2118/205492-PA.
  32. Xie, H.P., Liu, T., Gao, M.Z., Chen, L., Zhou, H.W., Ju, Y. and Zhao, Z.Y. (2021), "Research on in-situ condition preserved coring and testing systems", Petrol. Sci., 18(6), 1840-1859. https://doi.org/10.1016/j.petsci.2021.11.003.
  33. Xu, C., Kang, Y., You, L. and You, Z. (2017), "Lost-circulation control for formation-damage prevention in naturally fractured reservoir: Mathematical model and experimental study", SPE J., 22(05), 1654-1670. https://doi.org/10.2118/182266-PA.
  34. Zhang, H., Wang, J. and Wang, X. (2015), "Application of expandable convoluted tubing technique in easy collapsed formation of highly deviated well", Fault-Block Oil Gas Field 22(3), 394-397.
  35. Zhao L. and Duan Q.Q. (2021), "Forming optimisation and mechanical analysis of an expandable profile liner for leakage plugging in oil and gas wells", Int. J. Oil Gas Coal Technol., 28(2):192-209. https://doi.org/10.1504/IJOGCT.2021.10039052.
  36. Zhao, L., Zhang, H., Duan, Q. and Tang, G. (2020), "Failure analysis of large-diameter coiled tubing based on diameter growth", J. Pressure Vessel Technol., 142(3), 031301. https://doi.org/10.1115/1.4045511.
  37. Zhao, L., Zhang, H., Tu, Y. and Duan, Q. (2019), "Research on testing a prototype of an expandable profile liner in a directional-well section in a high-fidelity laboratory environment", SPE J., 24(05), 2047-2063. https://doi.org/10.2118/194200-PA