DOI QR코드

DOI QR Code

Numerical investigation of buckling-restrained steel plate shear wall under fire loading

  • 투고 : 2022.03.10
  • 심사 : 2022.07.09
  • 발행 : 2022.07.25

초록

In this study, the seismic behavior of an all-steel buckling-restrained (AB) steel plate shear wall (SPSW) with incline slits under fire and cyclic loading was investigated. ABSPSW was composed of two thin steel infill plates with a narrow distance from each other, which were embedded with incline slits on each plate. These slits were in opposite directions to each other. The finite element (FE) numerical model was validated with three test specimens and after ensuring the modeling strategy, the parametric study was performed by considering variables such as wall plate thickness, slit width, strip width between two slits, and degree of temperature. A total of 256 FE numerical models were subjected to coupled temperature-displacement analysis. The results of the analysis showed that the high temperature reduced the seismic performance of the ABSPSW so that at 917℃, the load-bearing capacity was reduced by 92%. In addition, with the increase in the temperature, the yield point of the infill plate and frame occurred in a small displacement. The average decrease in shear strength at 458℃, 642℃, and 917℃ was 18%, 46%, and 92%, respectively, compared to the shear strength at 20℃. Also, with increasing the temperature to 917℃, ductility increased by an average of 75%

키워드

참고문헌

  1. Abaqus, V. (2011), 6.14 Documentation, Dassault Systemes Simulia Corp., Providence, RI, U.S.A.
  2. Ahmadi, M. and Ebadi Jamkhaneh, M. (2021), "Numerical investigation of energy dissipation device to improve seismic response of existing steel buildings with soft first story", Int. J. Steel Struct., 21(2), 691-702. https://doi.org/10.1007/s13296-021-00466-1.
  3. Alavi, E. and Nateghi, F. (2013), "Experimental study of diagonally stiffened steel plate shear walls", J. Struct. Eng., 139(11), 1795-1811. https://doi.org/10.1016/j.jcsr.2013.06.005.
  4. Alinia, M.M. and Dastfan, M. (2007), "Cyclic behaviour, deformability and rigidity of stiffened steel shear panels", J. Construct. Steel Res., 63(4), 554-563. https://doi.org/10.1016/j.jcsr.2006.06.005.
  5. Bagheri, M., Jamkhaneh, M.E. and Samali, B. (2018), "Effect of seismic soil pile structure interaction on mid and high rise steel buildings resting on a group of pile foundations", Int. J. Geom., 18(9), 04018103. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001222.
  6. Bahrebar, M., Lim, J.B., Clifton, G.C., Zirakian, T., Shahmohammadi, A. and Hajsadeghi, M. (2020), "Perforated steel plate shear walls with curved corrugated webs under cyclic loading", Structures, 24, 600-609. https://doi.org/10.1016/j.istruc.2020.01.047.
  7. Barua, K. and Bhowmick, A.K. (2019), "Nonlinear seismic performance of code designed perforated steel plate shear walls", Steel Compos. Struct., 31(1), 85-98. http://dx.doi.org/10.12989/scs.2019.31.1.085.
  8. Chen, S.J. and Jhang, C. (2006), "Cyclic behavior of low yield point steel shear walls", Thin Wall Struct., 44(7), 730-738. https://doi.org/10.1016/j.tws.2006.08.002.
  9. Code, P. (2005) Eurocode 8: Design of structures for earthquake resistance-part 1: general rules, seismic actions and rules for buildings, European Committee for Standardization; Brussels, Belgium.
  10. Dai, X.H. and Lam, D. (2012), "Shape effect on the behaviour of axially loaded concrete filled steel tubular stub columns at elevated temperature", J. Construct. Steel Res., 73, 117-127. https://doi.org/10.1016/j.jcsr.2012.02.002.
  11. Dong, Y., Zhu, E. and Prasad, K. (2009), "Thermal and structural response of two-storey two-bay composite steel frames under furnace loading", Fire Safety J., 44(4), 439-450. https://doi.org/10.1016/j.firesaf.2008.09.005.
  12. Ebadi Jamkhaneh, M. and Kafi, M.A. (2018a), "Equalizing octagonal PEC columns with steel columns, experimental and theoretical study", Pract. Period. Struct. Design Construct., 23(3), 04018012. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000375.
  13. Ebadi Jamkhaneh, M. and Kafi, M.A. (2018b), "Experimental and numerical study of octagonal composite column subject to various loading", Period. Polytech. Civil Eng., 62(2), 413-422. https://doi.org/10.3311/PPci.11334.
  14. Ebadi Jamkhaneh, M., Homaioon Ebrahimi, A. and Shokri Amiri, M. (2018c), "Seismic performance of steel-braced frames with an all-steel buckling restrained brace", Pract. Period. Struct. Design Construct., 23(3), 04018016. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000381.
  15. Ebadi Jamkhaneh, M., Kafi, M.A. and Kheyroddin, A. (2019a), "Behavior of partially encased composite members under various load conditions: Experimental and analytical models", Adv. Struct. Eng., 22(1), 94-111. https://doi.org/10.1177/1369433218778725.
  16. Ebadi Jamkhaneh, M., Kafi, M. A., Kheyroddin, A. and Shokri Amiri, M. (2019b), "Progressive collapse resistance of a composite steel and concrete structural frame", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 172(3),197-213. https://doi.org/10.1680/jstbu.17.00149.
  17. Ebadi Jamkhaneh, M., Ebrahimi, A.H. and Amiri, M.S. (2019c), "Experimental and numerical investigation of steel moment resisting frame with U-shaped metallic yielding damper", Int. J. Steel Struct., 19(3), 806-818. https://doi.org/10.1007/s13296-018-0166-z
  18. Ebadi Jamkhaneh, M., Ebrahimi, A.H. and Amiri, M.S. (2019d), "Investigation of the seismic behavior of brace frames with new corrugated all-steel buckling restrained brace", Int. J. Steel Struct., 19(4),1225-1236. https://doi.org/10.1007/s13296-018-00202-2
  19. Ebadi Jamkhaneh, M., Ahmadi, M. and Sadeghian, P. (2020a), "Simplified relations for confinement factors of partially and highly confined areas of concrete in partially encased composite columns", Engineering Structures, 208,110303. https://doi.org/10.1016/j.engstruct.2020.110303
  20. Ebadi Jamkhaneh, M., Ebrahimi, A.H. and Amiri, M.S. (2020b), "Investigation of the behaviour of geosynthetic-reinforced stone columns", Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 173(6),535-545. https://doi.org/10.1680/jgeen.19.00161
  21. Ebadi Jamkhaneh, M., Ebrahimi, A. H. and Amiri, M. S. (2020c), "Numerical investigation of the behavior of MERO joint system under combined loading regarding helical threads of elements", Int. J. Steel Struct., 20(3),897-909. https://doi.org/10.1007/s13296-020-00330-8
  22. Ebadi Jamkhaneh, M., Homaioon Ebrahimi, A. and Kontoni, D.P.N. (2021a), "Numerical finite element study of strengthening of damaged reinforced concrete members with carbon and glass FRP wraps", Comput. Concrete, 28(2), 137-147. http://dx.doi.org/10.12989/cac.2021.28.2.137.
  23. Ebadi-Jamkhaneh, M., Homaioon-Ebrahimi, A., Kontoni, D.P.N. and Shokri-Amiri, M. (2021b), "Numerical FEM assessment of soil-pile system in liquefiable soil under earthquake loading including soil-pile interaction", Geom. Eng., 27(5), 465-479. https://doi.org/10.12989/gae.2021.27.5.465.
  24. Ebadi Jamkhaneh, M., Ahmadi, M. and Shokri Amiri, M. (2021c), "Sustainable reuse of inorganic materials in eco friendly clay bricks, special focus on mechanical and durability assessment", J. Mater. Civil Eng., 33(6), 04021111. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003737.
  25. Ebadi-Jamkhaneh, M., Rezaei, M. and Ahmadi, M. (2021d), "Seismic behavior of steel braced frames equipped with metal foam", Int J Steel Struct, 21(4), 1420-1430. https://doi.org/10.1007/s13296-021-00513-x.
  26. Ebadi-Jamkhaneh, M., Ahmadi, M. and Kontoni, D.N. (2021e), "Experimental study of the mechanical properties of burnt clay bricks incorporated with plastic and steel waste materials", IOP Conference Series: Earth and Environmental Science, 899(1), 012042. https://doi.org/10.1088/1755-1315/899/1/012042.
  27. Ebadi-Jamkhaneh, M. and Ahmadi, M. (2021f), "Comprehensive investigations into the effect of bolt tightness on axial behavior of MERO joint system, experimental, FEM, and soft computing approaches", J. Struct. Eng., 147(12), 04021197. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003168.
  28. Ebadi Jamkhaneh, M. and Kontoni, D.P.N. (2022), "Numerical finite element investigation of thin steel shear walls retrofitted with CFRP layers under reversed cyclic loading", J. Build. Pathol. Rehabil., 7(1), 62. https://doi.org/10.1007/s41024-022-00200-2.
  29. Edalati, S.A., Yadollahi, Y., Pakar, I. and Bayat, M. (2015), "On the effect of GFRP fibers on retrofitting steel shear walls with low yield stress", Earthq. Struct., 8(6), 1453-1461. https://doi.org/10.12989/eas.2015.8.6.1453.
  30. Ghamari, A. and Haeri, H. (2021), "Improving the behavior of high performance steel plate shear walls using low yield point steel", Case Stud. Construct. Mater., 14, e00511. https://doi.org/10.1016/j.cscm.2021.e00511.
  31. Guo, L., Li, R., Rong, Q. and Zhang, S. (2012), "Cyclic behavior of SPSW and CSPSW in composite frame", Thin Wall Struct., 51, 39-52. https://doi.org/10.1016/j.tws.2011.10.014.
  32. Hassani, F. and Javanbakht, Z. (2021), "Effect of geometrical variations on the failure mechanisms of perforated steel plate shear Walls, a parametric study towards a new design", Thin Wall Struct., 159, 107244. https://doi.org/10.1016/j.tws.2020.107244.
  33. Hitaka, T. and Matsui, C. (2003), "Experimental study on steel shear wall with slits", J. Struct. Eng., 129(5), 586-595. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:5(586).
  34. Hoehler, M.S., Smith, C.M., Hutchinson, T.C., Wang, X., Meacham, B.J. and Kamath, P. (2017), "Behavior of steel sheathed shear walls subjected to seismic and fire loads", Fire Safety J., 91, 524-531. https://doi.org/10.1016/j.firesaf.2017.03.021.
  35. Homaioon Ebrahimi, A., Ebadi Jamkhaneh, M. and Shokri Amiri, M. (2018), "3D finite-element analysis of steel moment frames including long-span entrance by strengthening steel cables and diagonal concentrically braced frames under progressive collapse", Pract. Period. Struct. Design Construct., 23(4), 04018025. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000388.
  36. Jamshidi, M., Naserabadi, H.D. and Oliaei, M. (2020), "Performance of steel-plate shear wall at high temperature", J. Struct. Fire Eng., 11, 499-527. https://doi.org/10.1108/jsfe-02-2020-0005.
  37. Koloo, F.A., Badakhshan, A., Fallahnejad, H., Jamkhaneh, M.E. and Ahmadi, M. (2018), "Investigation of proposed concrete filled steel tube connections under reversed cyclic loading", Int. J. Steel Struct., 18(1), 163-177. https://doi.org/10.1007/s13296-018-0313-6.
  38. Krawinkler H. and Applied Technology Council (1992), Guidelines for cyclic seismic testing of components of steel structures, Applied Technology Council, Redwood City, CA, U.S.A.
  39. Liew, J.R. (2008), "Survivability of steel frame structures subject to blast and fire", J. Construct. Steel Res., 64(7-8), 854-866. https://doi.org/10.1016/j.jcsr.2007.12.013.
  40. Luo, Q., Wang, W., Sun, Z., Xu, S. and Wang, B. (2021), "Seismic performance analysis of corrugated steel plate composite shear wall based on corner failure", J. Construct. Steel Res., 180, 106606. https://doi.org/10.1016/j.jcsr.2021.106606.
  41. Monsef Ahmadi, H., Sheidaii, M.R., Tariverdilo, S., Formisano, A. and De Matteis, G. (2021), "Seismic behavior of thin cold formed steel plate shear walls with different perforation patterns", Earthq. Struct., 20(4), 377-388. https://doi.org/10.12989/eas.2021.20.4.377.
  42. Nooralizadeh Keshteli, O., Rahimi, S. and Ebadi Jamkhaneh, M. (2021), "Numerical investigation of steel moment resisting frame on sandy soil under normal fault rupture", Int. J. Steel Struct., 21(2), 703-716. https://doi.org/10.1007/s13296-021-00467-0.
  43. Olabi, M.N., Caglar, N., Kisa, M.H. and Yuksel, S.B. (2021), "Numerical study on the response of composite shear walls with steel sheets under cyclic loading", J. Build. Eng., 34, 102069. https://doi.org/10.1016/j.jobe.2020.102069.
  44. Salimi, S.M., Rahimi, S., Hoseinzadeh, M., Kontoni, D.P.N. and Ebadi Jamkhaneh, M. (2021), "Numerical 3d finite element assessment of bending moment-resisting frame equipped with semi disconnected steel plate shear wall and yielding plate connection", Metals, 11(4), 604. https://doi.org/10.3390/met11040604.
  45. Shekastehband, B., Azaraxsh, A.A. and Showkati, H. (2017), "Hysteretic behavior of perforated steel plate shear walls with beam only connected infill plates", Steel Compos. Struct., 25(4), 505-521. http://dx.doi.org/10.12989/scs.2017.25.4.505.
  46. Soltani, N., Abedi, K., Poursha, M. and Golabi, H. (2017), "An investigation of seismic parameters of low yield strength steel plate shear walls", Earthq. Struct., 12(6), 713-723. https://doi.org/10.12989/eas.2017.12.5.713.
  47. ISO 834-1:1999 (1999), Fire-resistance Tests-Elements of Building Construction-Part 1: General Requirements", ISO; Geneva, Switzerland.
  48. Sun, R., Huang, Z. and Burgess, I.W. (2012), "Progressive collapse analysis of steel structures under fire conditions", Eng. Struct., 34, 400-413. https://doi.org/10.1016/j.engstruct.2011.10.009.
  49. Toric, N., Harapin, A. and Boko, I. (2013), "Experimental verification of a newly developed implicit creep model for steel structures exposed to fire", Eng. Struct., 57, 116-124. https://doi.org/10.1016/j.engstruct.2013.09.024.
  50. Wang, M., Zhang, X., Yang, L. and Yang, W. (2020), "Cyclic performance for low-yield point steel plate shear walls with diagonal T-shaped-stiffener", J. Construct. Steel Res., 171, 106163. https://doi.org/10.1016/j.jcsr.2020.106163.
  51. Wang, P., Xue, Z. and Xiao, S. (2017), "Seismic behavior of self buckling restrained steel plate shear wall made by two incline slotted infill plates", J. Construct. Steel Res., 133, 47-64. https://doi.org/10.1016/j.jcsr.2017.02.001.
  52. Yang, K.C., Chen, S.J., Lin, C.C. and Lee, H.H. (2005), "Experimental study on local buckling of fire resisting steel columns under fire load", J. Construct. Steel Res., 61(4), 553-565. https://doi.org/10.1016/j.jcsr.2004.07.001.
  53. Zarrinkolaei, F.A., Naseri, A. and Gholampour, S. (2021), "Numerical assessment of effect of opening on behavior of perforated steel shear walls", J. Construct. Steel Res., 181, 106587. https://doi.org/10.1016/j.jcsr.2021.106587.
  54. Zhang, C., Wu, H., Zhu, T., Lin, X., Zhao, J. and Wang, Q. (2020), "Accurate prediction of shear buckling capacity of low yield strength steel considering plastic deformations", J. Construct. Steel Res., 172, 106183. https://doi.org/10.1016/j.jcsr.2020.106183.
  55. Zhang, S.M., Wu, Z.J. and Ma, X.B. (2008), "Influence of precast concrete plate on static behavior of steel-concrete composite shear wall", J. Architect. Civil Eng., 25(1), 18-22.