Journal of the Korean Society of Clothing and Textiles (한국의류학회지)

The Korean Society of Clothing and Textiles (한국의류학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Modeling Design and Dyeability of DLP 3D Printed Textiles

DLP 3D Printed Textile의 유연성 향상을 위한 모델링 디자인 및 염색성 평가

  • Shim, Yeon Je (Dept. of Clothing and Textiles, Sookmyung Women's University) ;
  • Kim, Hyunjin (Dept. of Clothing and Textiles, Sookmyung Women's University) ;
  • Kim, Hye Rim (Dept. of Clothing and Textiles, Sookmyung Women's University/Design Research Institute for Creativity and Convergence, Sookmyung Women's University)
  • 심연제 (숙명여자대학교 의류학과) ;
  • 김현진 (숙명여자대학교 의류학과) ;
  • 김혜림 (숙명여자대학교 의류학과/숙명여자대학교 창의융합 디자인연구소)
  • Received : 2021.06.29
  • Accepted : 2022.03.24
  • Published : 2022.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

3D printing has been considered a key technology, leading the fourth industrial revolution. However, 3D printed textile still has a lot of limitations to overcome before it can be adopted as a clothing material in terms of design, flexibility and dyeability. This study aims to provide modeling design for imparting the flexibility and post-dyeing process for 3D printed textiles. The modeling types were designed to test the flexibility of 3D printed textiles. The post-dyeing process was evaluated through dye absorption depending on the resin and modeling types, respectively. The results were as follows: two types of modeling (Modeling A and B) were designed with a ring structure to test the flexibility of the 3D printed textiles. The 3D printed textiles with ring-based structure Modeling A had flexibility regardless of the hardness of resin types. In the dyeability test, softening resin (S-Resin) and hardening resin (H-Resin) were found to have good dyeability with acid dye and direct dye, respectively. The condition of S-Resin with acid dye and H-Resin with direct dye was controlled by dye absorption rate.

Keywords

References

  1. Aksay, S. (2019). Effects of Al dopant on XRD, FT-IR and UV-vis properties of MgO films. Physica B: Condensed Matter, 570, 280-284. doi:10.1016/j.physb.2019.06.020
  2. Ao, D., Zhang, J., & Liu, H. (2018). Visible-light-driven photocatalytic degradation of pollutants over Cu-doped NH2-MIL-125(Ti). Journal of Photochemistry and Photobiology A: C hemistry, 364, 524-533. doi:10.1016/j.jphotochem.2018.06.044
  3. Azambuja, E. (2017, March 3). 3D printing with cellulose. Electronic Specifier. Retrieved from https://www.electronicspecifier.com/products/3d-printing/3d-printing-with-cellulose
  4. Bai, S.-K. (2004). The study of the dyeability of Brassica Campestris on the cotton fabric. Journal of the Korean Society for Clothing Industry, 6(6), 799-802.
  5. Barkane, A., Platnieks, O., Jurinovs, M., & Gaidukovs, S. (2020). Thermal stability of UV-cured vegetable oil epoxidized acrylate-based polymer system for 3D printing application. Polymer Degradation and Stability, 181:109347. doi:10.1016/j.polymdegradstab.2020.109347
  6. Carlota, V. (2020, March 4). 3D printed shoes: what's available on the market today? 3Dnatives. Retrieved from https://www.3dnatives.com/en/3d-printed-shoes-whats-available-on-the-market-today/#!
  7. Chen, S., Duan, Y., Hua, W., Lin, Q., Qu, B., Wang, R., ... Zhuo, D. (2022). Synthesis of novel acrylic liquid-crystal resin and its in-situ enhancement in light-curing 3D printing performance. Journal of Materials Research and Technology, 17, 2158-2174. doi:10.1016/j.jmrt.2022.01.159
  8. Cho, A. (2003). Fabrics dyeing using natural colorants extracted from American Fleabane (Unpublished master's thesis). Chonnam National University, Gwangju.
  9. Choi, Y. J., & Ryu, H. S. (1995). A study on the dyeability of the aminized cotton fabrics. Journal of the Korean Society of Clothing and Textiles, 19(1), 51-56.
  10. Claesson, H., Scheurer, C., Malmstrom, E., Johansson, M., Hult, A., Paulus, W., & Schwalm, R. (2004). Semi-crystalline thermoset resins: tailoring rheological properties in melt using comb structures with crystalline grafts. Progress in Organic Coatings, 49(1), 13-22. doi:10.1016/j.porgcoat.2003.07.001
  11. Dengate, J. (2016, April 11). New Balance wins race for 3D printed running shoe. Runner's World. Retrieved from https://www.runnersworld.com/news/a20792199/new-balance-wins-race-for-3d-printed-running-shoe/
  12. Du, Y. (2019). A study of fashion design development based on denim recycling (Unpublished master's thesis). Kookmin University, Seoul.
  13. El-Shishtawy, R. M., Nassar, S. H., & Ahmed, N. S. E. (2007). Anionic colouration of acrylic fibre. Part II: Printing with reactive, acid and direct dyes. Dyes and Pigments, 74(1), 215-222. doi:10.1016/j.dyepig.2006.01.036
  14. FacFox. (2021, August 5). How to dye resin 3D prints? FacFox. Retrieved from https://facfox.com/docs/kb/how-to-dye-resin-3d-prints
  15. Han, Y., & Kim, J. (2019). Study on peel strength measurement of 3D printing composite fabric by using FDM. Journal of Fashion Business, 23(2), 77-88. doi:10.12940/JFB.2019.23.2.77
  16. Hornick, J., & Bhushan, A. (2016, October 3). More 3D printing patents are expiring soon: Here's a roundup. 3D Printing Industry. Retrieved from https://3dprintingindustry.com/news/more-3d-printing-patents-are-expiring-soon-heres-a-roundup-96561/
  17. Ji, Z., Yan, C., Yu, B., Wang, X., & Zhou, F. (2017). Multimaterials 3D printing for free assembly manufacturing of magnetic driving soft actuator. Advanced Materials Interfaces, 4(22):1700629. doi:10.1002/admi.201700629
  18. Jin, Y., Qamar, I., Wessely, M., Adhikari, A., Bulovic, K., Punpongsanon, P., & Mueller, S. (2019). Photo-chromeleon: Reprogrammable multi-color textures using photochromic dyes. Proceedings of the 32nd Annual ACM Symposium on User Interface Software and Technology, USA, 701-712. doi:10.1145/3332165.3347905
  19. Jo, J. H. (2006, December 4). 광통신용 고분자 신소재의 연구개발 동향 [R&D trend of new polymer materials for optical communication]. TECHWORLD. Retrieved from http://www.epnc.co.kr/news/articleView.html?idxno=6550
  20. Kabir, S., Kim, H., & Lee, S. (2020). Characterization of 3D printed auxetic sinusoidal patterns/nylon composite fabrics. Fibers and Polymers, 21(6), 1372-1381. doi:10.1007/s12221-020-9507-6
  21. Kim, H., & Lee, S. (2020). Mechanical properties of 3D printed re-entrant pattern with various hardness types of TPU filament manufactured through FDM 3D printing. Textile Scien ce and Engineering, 57(3), 166-176. doi:10.12772/TSE.2020.57.166
  22. Kim, H., Song, J. E., Silva, C., & Kim, H. R. (2020). Production of conductive bacterial cellulose-polyaniline membranes in the presence of metal salts. Textile Research Journal, 90(13-14), 1517-1526. doi:10.1177/0040517519893717
  23. Kim, S. (2019). The textile development using DLP 3D printing system and polyurethane acrylate photopolymer (Unpublished master's thesis). Sookmyung Women's University, Seoul.
  24. Kim, S., & Choi, Y.-L. (2016). 3D printing technology in fashion industry. Fashion Information and Technology, 13, 60-65.
  25. Kim, S. G., & Kim, H. R. (2018). The recent tendency of fashion textiles by 3D printing. Fashion & Textile Research Journal, 20(2), 117-127. doi:10.5805/sfti.2018.20.2.117
  26. Kim, S. G., Song, J. E., & Kim, H. R. (2020). Development of fabrics by digital light processing three-dimensional printing technology and using a polyurethane acrylate photopolymer. Textile Research Journal, 90(7-8), 847-856. doi:10.1177/0040517519881821
  27. Ko, C., & Lee, W. G. (2021). Cleaning behavior of aqueous solution containing amine or carboxylic acid in Cu-interconnection process. Korean Chemical Engineering Research, 59(4), 632-638. doi:10.9713/kcer.2021.59.4.632
  28. Lee, J. H. (2017, June 29). 4차 산업혁명 시대 3D 프린터 창업, 은퇴자들의 희망 될까 [Starting 3D printer business in the era of the 4th industrial revolution, would it be a hope for retirees?]. BRAVO my life. Retrieved from https://bravo.etoday.co.kr/view/atc_view.php?varAtcId=7260
  29. Lee, J. S., & Huh, J. S. (2017). Study of textile structure using 3D printing-focused on the comparison of FDM and DLP-. Korea Science & Art Forum, 31, 329-340. doi:10.17548/ksaf. 2017.12.30.329
  30. Lee, J. S., & Jin, S. M. (2017). Study on fashion design using DLP 3D printing. Journal of Basic Design & Art, 18(5), 449-460.
  31. Lee, S., & Kim, H. (2020). Mechanical properties of 3D printing spacer fabric structures manufactured using fused deposition modeling 3D printing technology. Textile Science and Engineering, 57(2), 77-84, doi:10.12772/TSE.2020.57.077
  32. Lee, S. H. (2015). Morphology and properties of textiles manufactured by three-dimensional printing based on fused deposition modeling. Textile Science and Engineering, 52(4), 272-279. doi:10.12772/TSE.2015.52.272
  33. Lesbani, A., Taher, T., Palapa, N. R., Mohadi, R., Rachmat, A., & Mardiyanto. (2020). Preparation and utilization of Keggin-type polyoxometalate intercalated Ni-Fe layered double hydroxides for enhanced adsorptive removal of cationic dye. SN Applied Sciences, 2(3):470. doi:10.1007/s42452-020-2300-8
  34. Liu, H., Chen, Y., Shi, C., Yang, X., & Han, D. (2020). FT-IR and Raman spectroscopy data fusion with chemometrics for simultaneous determination of chemical quality indices of edible oils during thermal oxidation. LWT - Food Science and Technology, 119:108906. doi:10.1016/j.lwt.2019.108906
  35. Lu, W. H., Xu, W. J., Wu, Y. M., Zhou, X., Lu, Y. B., & Xiong, Y. Q. (2006). Synthesis of dendritic poly(urethane acrylate) used for UV-curable coatings. Progress in Organic Coatings, 56(2-3), 252-255. doi:10.1016/j.porgcoat.2005.10.004
  36. Manufactur3D. (2020, October 15). How Nike is leveraging 3D printing in the footwear industry. Manufactur3D. Retrieved from https://manufactur3dmag.com/how-nike-is-leveraging-3d-printing-in-the-footwear-industry/
  37. Ministry of Science and ICT. (2020, June). 제2차 3D프린팅 산업진흥 기본계획(2020~2022) [Basic plan for promoting 3D printing industry (2020-2022)]. Ministry of Science and ICT. Retrieved from https://www.msit.go.kr/publicinfo/view.do?sCode=user&mPid=62&mId=63&publictSeqNo=246&publictListSeqNo=2&formMode=R&referKey=246,2
  38. Park, Y.-J., Yun, J.-G., Jang, H.-G., & Heo, B.-G. (2005). Effect of dyeing conditions on dyeing characteristics in silk during natural dyeing using the raw juice of indigo plants. Korean Journal of Plant Resources, 18(3), 417-423.
  39. Saunders, S. (2018, June 13). 3D printing viscous materials: Advances toward 3D printed rocket fuel, pharmaceuticals, cookie dough. 3DR Holdings. Retrieved from https://3dprint.com/216640/purdue-3d-print-viscous-materials/
  40. Sobuj, S. R. (2017, January 21). Crystalline and amorphous structure of fiber. Textile Study Center. Retrieved from https://textilestudycenter.com/cry-str-fiber/
  41. Song, C. E., Kim, K. S., Jang, H. G., Yoo, Y. K., Heo, B. G., & Park, Y. J. (2004). Natural dye on dry flower, the Laqurus ovatus using the extract isolated from marigold. Korean Journal of Horticultural Science & Technology, 22(1), 119-124.
  42. Song, J. E., Su, J., Loureiro, A., Martins, M., Cavaco-Paulo, A., Kim, H. R., & Silva, C. (2017). Ultrasound-assisted swelling of bacterial cellulose. Engineering in Life Sciences, 17(10), 1108-1117. doi:10.1002/elsc.201700085
  43. Song, W. S., Kim, I. Y., & Kim, H. R. (2012). Textiles (3rd ed.). Paju: Kyomunsa
  44. Theivandran, G., Mohamed Ibrahim, S., & Murugan, M. (2015). Fourier Transform Infrared (Ft-Ir) spectroscopic analysis of Spirulina Fusiformis. Journal of Medicinal Plants Studies, 3(4), 30-32.
  45. Yoo, H. J., Lee, H.-J., Han, Y., Song, K. H., Kim, J. H., & Ahn, C. (2014). Textile dyeing and finishing. Seoul: Hyungseul Publishing.
  46. Zulkifli, F., Ali, N., Yusof, M. S. M., Isa, M. I. N., Yabuki, A., & Wan Nik, W. B. (2017). Henna leaves extract as a corrosion inhibitor in acrylic resin coating. Progress in Organic Coatings, 105, 310-319. doi:10.1016/j.porgcoat.2017.01.017