과제정보
본 연구는 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 연구 과제입니다(No. 20193110100020).
참고문헌
- ASME BPVCode Sec. III, 2019, "Rules for Construction of Nuclear Facility Components," Americamn Society of Mechanical Engineers, NY.
- IAEA, 2016, "Consideration of the application of the IAEA safety requirements for the design of nuclear power plants," IAEA TECDOC-1791.
- OECD/NEA, 2015, "Interim Report on Metallic Components Margins under High Seismic Loads," NEA/CSNI/R(2015)8.
- Slagies, G.C., 1997, "Evaluation of Seismic Response Data for Piping," WRC Bulletin 423. ISSN 0043-2326
- Nakamura, I., 2019, "Numerical Investigation on Strength of Tee Pipes under In-plane/Out-of-Plane Cyclic Loading," Proc. of the ASME 2019 Conference, San Antonio, TX, PVP2019-93559. https://doi.org/10.1115/PVP2019-93559
- USNRC, 2008, "Seismic Analysis of Large-Scale Piping Systems for the JNES-NUPEC Ultimate Strength Piping Test Program," U.S. Nuclear Regulatory Commission, Washington, DC., NUREG/CR-6983
- Nakamura, I. and Kasahara, N., 2017, "Excitation Tests on Elbow Pipe Specimens to Investigate Failure Behavior under Excessive Seismic Loads," J. Press. Vess.-T ASME, Vol. 139, No. 6, 061802, http://doi.org/10.1115/1.4037952
- Warakabe, T., Tsukimori, K., Kitamura, S., and Morishita, M., 2016, "Ultimate Strength of a Thin Wall Elbow for Sodium Cooled Fast Reactors under Seismic Loads," J. Press. Vess.-T ASME, Vol. 138, No. 3, 021801. http://doi.org/10.1115/1.4031721
- Ravikiran, A., Dubey, P.N., Agrawal, M.K., Reddy, G.R., Singh, R.K., and Vaze, K. K., 2015, "Experimental and Numerical Studies of Ratcheting in a Pressurized Piping System under Seismic Load," J. Press. Vess.-T ASME, Vol. 137, No. 3, 031011. http://doi.org/10.1115/1.402819
- Gupta, S.K., Goyal, S., Bhasin, V., Vaze, K.K., Ghosh, A.K., and Kushwaha, H.S., 2009, "Racheting-Fatigue Failure of Pressurized Elbows made of Carbon Steel," Proc. of SMiRT-20 Conference, Espoo, Finland, Aug. 9-14, Paper 1861.
- JSME, 2019, "Code for Nuclear Power Generation Facilities: Rules on Design and Construction for Nuclear Power Plants," JSME S NC1, NC-CC-008 (in Japanese)
- Varelis, G.E., Karamanos, S.A., and Gresnigt, A.M., 2013, "Pipe Elbows Under Strong Cyclic Loading," J. Press. Vess.-T ASME, Vol. 135, No. 2, 011207. http://doi.org/10.1115/1.4007293
- Jeon, B.G., Kim, S.W., Choi, H.S., Park, D.U., and Kim, N.S., 2017, "A Failure Estimation Method of Steel Pipe Elbows under In-plane Cyclic Loading," Nucl. Eng. Tech., Vol. 49, No.1, pp. 245-253. https://doi.org/10.1016/j.net.2016.07.006
- Hong, J.N., Kim, S.E., Kim, J.W., Lee, D.Y., and Kim, Y.J., 2022, "Very Low-Cycle Fatigue Behaviours of Pipe Elbows: Part I - Experiment of Displacement-Controlled Cyclic Bending," Thin-Walled Struc. (submitted)
- ABAQUS. version 2018, 2018, User's manual, Inc. and Dassault systems.
- Chaboche, J. L., 1991, "On some modifications of kinematic hardening to improve the description of ratcheting effects," Int. J. Plasticity, Vol. 7, pp. 661-667. http://doi.org/10.1016/0749-6419(91)90050-9
- Takahashi, K., Watanabe, S., Ando, K., Urabe, Y., Hidaka, A., Hisatsune, M., and Miyazaki, K., 2009, "Low cycle fatigue behaviors of elbow pipe with local wall thinning," Nucl. Eng. Des., Vol. 239, No. 12, pp. 2719-2727. https://doi.org/10.1016/j.nucengdes.2009.09.011
- Balan, C. and Redekop, D., 2005, "The effect of bi-directional loading on fatigue assessment of pressurized piping elbows with local thinned areas," Int. J. Press. Ves. Pip., Vol. 82, No. 3, pp. 235-242. https://doi.org/10.1016/j.ijpvp.2004.07.020
- Karamanos, S.A., Giakoumatos, E., Gresnigt, and A.M., 2003, "Nonlinear response and failure of steel elbows under in-plane bending and pressure," J. Press. Vess.-T ASME,, Vol. 125, No. 4, pp. 393-402. https://doi.org/10.1115/1.1613949
- Kim, J.Y., Lee, J.M., Kim, Y.J., and Kim, J.W., 2022, "Analysis of the Elbow Thickness Effect on Crack Location and Propagation Direction via Elastic-Plastic Element Analysis," Trans. of the KPVP, Vol. 18, No. 1, pp. 26-35. http://dx.doi.org/10.20466/KPVP.2022.18.1.026
- Stepens, R.I., Fatemi, A., Stepens, R.R., and Fuchs, H.O., 2001, Metal Fatigue in Engineering, 2nd ed., John Wiley & Sons InC.