Acknowledgement
본 연구는 산업통상자원부(MOTIE)와 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 연구 과제입니다(No. 20193110100020).
References
- USNRC, 1989, "Erosion/corrosion-induced pipe wall hinning in US NPPs", NUREG-1344.
- Lee, S. H., Lee, Y. S., Kim, H. D., Lee, K. S. and Hwang, K. M., 2015, "Review on the Integrity Evaluation and Maintenance of Wall-Thinned Pipe," Trans. of the KPVP, Vol. 11, No. 2, pp. 51-60. doi:https://doi.org/10.20466/KPVP.2015.11.2.051
- Seo, K. W., Gim, J. M., and Kim, Y. J., 2021, "Effect of Local Wall Thinning on Pipe Elastic Bending Compliance," Trans. of the KPVP, Vol. 17, No. 2, pp. 83-89. doi:https://dx.doi.org/10.20466/KPVP.202.17.2.083
- Kim, K. S., Kim, M. K., Cho, D. H., and Jeong, J. J., 2021, "Evaluation of the Burst Pressure for Rectangular Wall-thinning of CANDU Feeder Pipe," Trans. of the KPVP, Vol. 17, No. 1, pp. 28-35. doi: https://dx.doi.org/10.20466/KPVP.202.17.1.028
- Park, C. Y., Lee, S. H., Kim, T. R., and Park, S. K., 2008, "Development of PiTEP for Integrity Evaluation of Wall Thinned Pipes," Trans. of the KPVP, Vol. 4, No. 1, pp. 37-44.
- ASME Boiler and Pressure Vessel Code, Section III, 2015, "Rules for Construction of Nuclear Power Plant Components," American Society of Mechanical Engineers, NY.
- Kim, J. S., Jang, J. H., and Kim, Y. J., 2022, "Efficient Elastic Stress Analysis Method for Piping System With Wall-thinning and Reinforcement," Nucl. Eng. Des, Vol. 54, pp. 732-740. doi: https://doi.org/10.1016/j.net.2021.08.026
- Jang, J. H., Kim, J. S., and Kim, Y. J., 2022, "Analytical Equivalent Stiffness Analysis for Various Reinforcements of Wall-thinned Pipe," Trans. of the KPVP, Vol. 18, No. 1, pp. 11-18. doi:http://dx.doi.org/10.20466/ KPVP.202.18.1.011
- ASME Section XI Code Case N-786-3, 2017, "Alternative Requirements for Sleeve Reinforcement of Class 2 and 3 Moderate-Energy Carbon Steel Piping for Raw Water Service," American Society of Mechanical Engineers, NY, USA.
- ASME Section XI Code Case N-789-3, 2017, "Alternative Requirements for Pad Reinforcement of Class 2 and 3 Moderate-Energy Carbon Steel Piping," American Society of Mechanical Engineers, NY, USA.