DOI QR코드

DOI QR Code

A Study on the Application of FLO-2D Model for Analysis of Debris Flow Damage Area

토석류 피해지역 분석을 위한 FLO-2D 모형의 적용에 관한 연구

  • Jo, Hang-Il (Graduate School of Disaster Prevention, Kangwon National University) ;
  • Jun, Kye-Won (Graduate School of Disaster Prevention, Kangwon National University)
  • 조항일 (강원대학교 방재전문대학원) ;
  • 전계원 (강원대학교 방재전문대학원)
  • Received : 2022.06.20
  • Accepted : 2022.06.29
  • Published : 2022.06.30

Abstract

As the frequency of torrential rains and typhoons increases due to climate change, the frequency of occurrence of debris flow is also increasing. In particular, in the case of Kangwon-do, the occurrence of damage caused by mountain disasters is increasing as it has a topographical characteristic where the mountains and the coast are in contact. In order to analyze the flow characteristics in the sedimentary part of the debris flow, input data were constructed through numerical maps and field data, and a two-dimensional model, FLO-2D, was simulated. The damaged area was divided into the inflow part of the debris flow, the village center, and the vicinity of the port, and the flow center and flow velocity of the debris flow were simulated and compared with field survey data. As a result, the maximum flow depth was found to be 2.4 m at the debris flow inlet, 2.7 m at the center of the village, and 1.4 m at the port adjacent to the port so the results were similar when compared to the field survey. And in the case of the maximum flow velocity, it was calculated as 3.6 m/s at the debris flow inlet, 4.9 m/s in the center of the village and 1.2 m/s in the vicinity of the port, so It was confirmed that the maximum flow center occurred in the section where the maximum flow rate appeared.

기후변화로 인해 집중호우와 태풍의 빈도가 늘어면서 토석류의 발생 빈도가 늘어나고 있다. 특히 강원도의 경우 산지와 해안이 접하는 지형적 특성을 가지고있어 산지재해에 의한 피해발생이 늘어나고 있다. 본 연구에서는 태풍 미탁으로 인해 발생한 강원도 삼척시를 대상으로 토석류 피해지역 분석을 위해 모델링을 수행하였다. 토석류 퇴적부분에서의 유동특성을 분석하기 위해 수치지도와 현장자료를 통해 입력자료를 구축하고 2차원 모델인 FLO-2D를 모의하였다. 피해지역을 토석류 유입부, 마을 중심부, 항구 인접부로 나누어서 토석류의 유동심과 유속을 모의하여 현장 조사한 자료와 비교분석하였다. 그 결과 최대유동심의 경우 토석류 유입부에서는 2.4m 마을 중심부에서는 2.7m, 항구 인접부에서는 1.4m로 나왔으며 현장조사와 비교분석 하였을 때 유사하게 나타났다. 그리고 최대 유속의 경우 토석류 유입부에서는 3.6m/s 마을 중심부에서는 4.9m/s, 항구 인접부에서는 1.2m/s로 산정되었으며 최대유속이 나타난 구간에서 최대유동심이 발생하는 것을 확인하였다.

Keywords

References

  1. Choi, J. R. (2018). An Analysis of Debris-Flow Propagation Characteristics and Assessment of Building Hazard Mapping Using FLO-2D. Crisisonomy. 14(2): 91-99.
  2. Christen, M., Kowalski, J., and Bartelt, P. (2010). RAMMS: Numerical Simulation of Dense Snow Avalanches in Three-dimensional Terrain. Cold Regions Science and Technology. 63(1-2): 1-14. https://doi.org/10.1016/j.coldregions.2010.04.005
  3. FLO-2D (2009). FLO-2D Reference Manual. http://www.flo-2d.com.
  4. Kang, B. D. (2022). Analysis on Characteristics of Debris Flow of Hyper KANAKO Model Considering Buildings. Master Dissertation. Kangwon National University.
  5. Kim, G. J. (2021). A Study on the Analysis of Debris Flow Disaster Area Using Hyper Kanako Model. M. S. Dissertation. Kangwon National University.
  6. Kim, N. G. (2011). A Study on Transport and Diffusion of Debris Flow with FLO-2D. M. S. Dissertation. Kangwon National University.
  7. Kim, S. E., Paik, J. C., and Kim, K. S. (2013). Run-out Modeling of Debris Flows in MT. UMyeon using FLO-2D. Journal of the Korean Society of Civil Engineers. 33(3): 965-974. https://doi.org/10.12652/Ksce.2013.33.3.965
  8. Kim, Y. H. (2017). Sediment Discharge Analysis according to Location Change of Check Dam Using Debris Flow Numerical Model. M. S. Dissertation. Kangwon National University.
  9. O'Brien, J. S. Julien, P. Y., and Fullerton, W. T. (1993). Two-dimensional Water Flood and Mudflow Simulation. Journal of Hydraulic Engineering. 119(2): 244-261. https://doi.org/10.1061/(ASCE)0733-9429(1993)119:2(244)
  10. Oh, C.Y. and Jun, K. W. (2019). Terrain Data Construction and FLO-2D Modeling of the Debris-Flow Occurrences Area Journal Korean Society of Disaster & Security. 12(4): 53-61. https://doi.org/10.21729/KSDS.2019.12.4.53
  11. Peng, S. H. and Lu, S. C. (2013). FLO-2D Simulation of Mudflow Caused by Large Landslide due to Extremely Heavy Rainfall In Southeastern Taiwan during Typhoon Morakot. Journal of Mountain Science. 10(2): 207-218. https://doi.org/10.1007/s11629-013-2510-2
  12. Tak, W. J. (2015). A Study on Transport and Diffusion Range Estimate of Debris Flow using RAMMS. M. S. Dissertation. Kangwon National University.