Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Prestressing Inducing Effect of Continuous Open-top Steel Box Girder Using Modular CFT Members

모듈형 CFT부재를 이용한 개구제형 연속 강박스 거더의 프리스트레싱 도입 효과

  • 이학준 (경상국립대학교 건설시스템공학과) ;
  • 김련학 (경상국립대학교 건설시스템공학과) ;
  • 조광일 ((주)택한 연구개발팀) ;
  • 안진희 (경상국립대학교 건설시스템공학과)
  • Received : 2022.04.28
  • Accepted : 2022.06.24
  • Published : 2022.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The increasing sectional stiffness and inducing prestress method of continuous steel box girder using modular CFT members use the restoring force of the CFT module generated from removing the prestressing bars in the CFT module after integrating the prestressed CFT module with the lower steel plate of the steel box girders as a prestressing force. The integrated CFT module in the steel box girder can improve the sectional stiffness of the continuous steel box girder section. To examine the applicability of the introduction of prestressing to the integrated steel box girder using the CFT module, in this study, inducing prestressing tests were conducted using CFT modules for steel plate specimens simulating the lower steel plate of the continuous steel box girder, and FE analyses were conducted for inducing prestressing tests. In addition, to confirm the effect of inducing prestress to the actual steel box girder and increasing sectional stiffness by the CFT modules, FE analyses for the actually applicable continuous steel box section were carried out depending on prestressing force and sectional conditions of the CFT modules, FE analysis results were compared.

모듈형 CFT 부재를 이용한 연속 강박스 거더의 단면강성 증대 및 프리스트레싱 공법은 긴장재로 프리스트레싱된 CFT 모듈을 강박스 거더 하부플랜지와 일체화한 후 긴장재를 제거함으로써 발생하는 CFT 모듈의 복원력을 강박스 거더 하부플랜지의 프리스트레싱력으로 이용하고 일체화된 CFT 모듈이 강박스 거더의 단면 강성을 향상시킨다. 본 연구에서는 CFT 모듈을 이용하여 일체화된 강박스 거더에 대한 프리스트레싱 도입의 적용성을 검토하기 위하여 하부플랜지를 모사한 실험체를 대상으로 CFT 모듈을 이용하여 프리스트레싱 도입 실험을 실시하고 유한요소해석으로 도입 프리스트레스를 평가하였다. 또한 실제 강박스 거더에 대한 프리스트레스 도입과 CFT 모듈을 통한 단면강성 증대효과를 확인하기 위하여 연속지점부에 적용 가능한 강박스 단면에 대하여 CFT 모듈에 도입된 프리스트레싱력 및 CFT 모듈의 단면제원에 따른 유한요소해석을 실시하고 이를 비교하였다.

Keywords

Acknowledgement

본 연구는 국토교통부 국토교통기술촉진연구사업(과제번호: 22CTAP-C163558-02)의 연구비 지원으로 수행되었으며, 이에 감사드립니다.

References

  1. Jeong, U. Y., and Lee, S. C. (2003), Introduction of design specification on open-top steel box girder bridge with inclined web, Magazine and Journal of Korean Society of Steel Construction, 15(4), 107-120.
  2. Saul, R. (1996), Bridges with double composite action, Structural Engineering International, Structural Engineering International, 6(1), 32-36. https://doi.org/10.2749/101686696780496067
  3. Choi, J. H., Shin, D. H., Joo, Y. T., and Lee, Y. H. (2002), Flexural Behaviors of Double Composite Steel Box Girders, Journal of the Korean Society of Civil Engineers A, 22(3A), 469-477.
  4. Yang, B. H., and Choi, H. Y. (2011), Double Composite Box Girder Bridges, Magazine and Journal of Korean Society of Steel Construction, 23(1), 80-82.
  5. Han, N. H., Jang, I. G., and Park, D. S. (2017), Introduction of DCB Girder Bridge, Journal of the Korean Society of Civil Engineers, 65(2), 84-86.
  6. Shim, J. S., and Han, D. J. (2011), A Study on the Strength Evaluation of Rectangular Steel Tubular Columns Infilled with High Strength Concrete, Journal of the Korea Institute for Structural Maintenance and Inspection, 15(1), 95-102. https://doi.org/10.11112/JKSMI.2011.15.1.095
  7. Lee, Y. H., Lee, T., Jeong, J. H., Kim, H. J., Park, K. T. (2014), Interface Behavior of Conctete Infilled Steel Tube Composite Beam, Journal of the Korea Institute for Structural Maintenance and Inspection, 18(5), 9-18. https://doi.org/10.11112/JKSMI.2014.18.5.009
  8. Chung, H. J. and Paik, K. H. (2018), Analysis on Flexural Behavior of Hollow Prestressed Concrete Filled Steel Tube Piles, Journal of the Korea Institute for Structural Maintenance and Inspection, 22(2), 133-140. https://doi.org/10.11112/JKSMI.2018.22.2.133
  9. ABAQUS, (2014), Abaqus/CAE User's Guide, Dassault Systems Simulia Corp.
  10. Teng, T. L. and Lin, C. C. (1998), Effect of welding conditions on residual stresses due to butt welds, International Journal of Pressure vessels and piping, 75(12), 857-864. https://doi.org/10.1016/S0308-0161(98)00084-2
  11. Lee, J. S. (2011), Deformation Characteristics of Intermittent Fillet Welding, Journal of Ocean Engineering and Technology, 25(6), 105-109. https://doi.org/10.5574/KSOE.2011.25.6.105
  12. Korean Society of Steel Construction (2017), KDS 14 31 10 : 2017, Design standard for Steel structural members (Load & Resistance Factor Design), Korea Construction Standard Center, Korean Design Standard.