초록
철기 문화재 복원에 사용되고 있는 실리카 계열의 무기질 충전제는 열팽창률감소, 흐름성 개선 등의 기능성 부여를 목적으로 사용되고 있다. 그러나 충전제의 양이 많을 수록 복원재의 물성저하 및 황변 현상 촉진의 원인이되며, 결과적으로 재처리로 이어져 유물의 피로도를 상승시키는 결과를 초래한다. 따라서 복원제와 충전제의 혼합 정량화 및 황변성 연구 필요성이 강조될 수 밖에 없다. 이를 보완하기 위해 실리카계 경량 충전제인 Micro Shell을 비교군으로 물성연구를 진행하였다. 실험 결과 기존에 사용하던 충전제에 비해 Micro Shell이 황변도 발생 수치가 최대 34% 낮았으며, 충전제의 배합양에 따라서 공통적으로 접착력과 비중의 물성 수치값이 좋은 것을 확인하였다. 본 연구 결과 Micro Shell의 사용 가능성에 대해 확인하였다.
Silica-based inorganic fillers for restoration of iron objects have been used for the reduction of thermal expansivity and the improvement of melt flow index. However, the higher the amount of filler is applied, the more degradation of mechanical properties and the yellowing occur, which could cause retreatment of the objects with adding stress to them. Thus, research on not only the quantification of a mixture of resin and filler but also the yellowing should be emphasized. Experiments on mechanical properties were carried out with a silica-based light filler, Micro Shell as a comparison group. The results of the experiment showed Micro Shell reduced the number of occurrences of the yellowing by 34% compared to existing fillers. The value of adhesion and specific gravity was also improved depending on the filler amount. The results of this research indicate the possibility of using Micro Shell as a new filler.