DOI QR코드

DOI QR Code

Equivalent boundary conditions to analyze the realistic fatigue behaviors of a bridge RC slab

  • Khan, Arslan Q. (Department of Civil Engineering, The University of Lahore) ;
  • Deng, Pengru (Faculty of Engineering, Hokkaido University) ;
  • Matsumoto, Takashi (Faculty of Engineering, Hokkaido University)
  • 투고 : 2020.11.08
  • 심사 : 2022.03.21
  • 발행 : 2022.05.10

초록

In this study, an equivalent boundary conditions (BCs) determination method is developed numerically for a panel reinforced concrete (RC) slab to realistically analyze the deformation and fatigue behaviors of a bridge RC slab. For this purpose, a finite element analysis of a bridge RC slab is carried out beforehand to calculate the stiffness of the bridge RC slab, and then the equivalent BCs for the panel RC slab are determined to achieve the same stiffness at the BCs to the obtained stiffness of the bridge RC slab at the corresponding locations of the bridge RC slab. Moreover, for the simulation of fatigue behaviors, fatigue analysis of the panel RC slab is carried out employing a finite element method based on a numerical model that considers the bridging stress degradation. Both the determined equivalent BCs and the BCs that have been typically applied in past studies are employed. The analysis results confirm that, in contrast to the panel RC slab with typically used BCs, the panel RC slab with equivalent BCs simulate the same bending moment distribution and deformation behaviors of the bridge RC slab. Furthermore, the equivalent BCs reproduce the extensive grid crack pattern in the panel RC slab, which is alike the pattern normally witnessed in a bridge RC slab. Conclusively, the panel RC slab with equivalent BCs behaves identical to the bridge RC slab, and, as a result, it shows more realistic fatigue behaviors observed in the bridge RC slab.

키워드

과제정보

The authors would like to acknowledge the Japan Bridge Engineering Center (JBEC) for supporting this study through "Grant-in-aid for research and development related to bridge technology".

참고문헌

  1. Deng, P. and Matsumoto, T. (2018), "Determination of dominant degradation mechanisms of RC bridge deck slabs under cyclic moving loads", Int. J. Fatigue, 112, 328-340. https://doi.org/10.1016/j.ijfatigue.2018.03.033.
  2. Deng, P. and Matsumoto, T. (2020), "Fracture mechanics-based fatigue life prediction method for RC slabs in punching shear failure mode", J. Struct. Eng., 146(1), 04019186. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002504.
  3. Deng, P., Kakuma, K., Mitamura, H. and Matsumoto, T. (2020), "Fatigue analysis of partly damaged RC slabs repaired with overlaid UHPFRC", Struct. Eng. Mech., 75(1), 19-32. https://doi.org/10.12989/sem.2020.75.1.019.
  4. Drar, A.A.M. and Matsumoto, T. (2016), "Fatigue analysis of RC slabs reinforced with plain bars based on the bridging stress degradation concept", J. Adv. Concrete Technol., 14(1), 21-34. https://doi.org/10.3151/jact.14.21.
  5. Drar, A.A.M., Matsumoto, T., Hayashikawa, T. and He, X. (2015), "Development of a numerical model to predict the fatigue behaviors of RC slabs", J. JSCE A2, 71(2), 805-812. https://doi.org/10.2208/jscejam.71.I_805.
  6. Frederick, G.R. (1997), "Experimental and analytical investigation of load distribution in concrete slab bridges", Proceedings of the Spring Conference of Society for Experimental Mechanics, Bellevue, Washington, June.
  7. Graddy, J.C., Kim J., Whitt J.H., Burns N.H. and Richard, E.K. (2002), "Punching-shear behavior of bridge decks under fatigue loading", ACI Struct. J., 99, 257-266. https://doi.org/10.14359/11909.
  8. Ho, I. and Shahrooz, B.M. (1998), "Finite element modeling of a deteriorated RC slab bridge: Lessons learned and recommendations", Struct. Eng. Mech., 6(3), 259-274. http://doi.org/10.12989/sem.1998.6.3.259.
  9. JBA (2018), Road Guide v. Nov. 2017: Composite Bridge Design Examples and Explanations, Japan Bridge Association, Tokyo, Japan. (in Japanese)
  10. Khan, A.Q., Deng, P. and Matsumoto, T. (2020a), "Approximate analytical conditions of a panel RC slab for reproducing the fatigue behaviors of a real bridge RC slab", J. Adv. Concrete Technol., 18(1), 1-16. https://doi.org/10.3151/jact.18.1.
  11. Khan, A.Q., Deng, P. and Matsumoto, T. (2020b), "Development of a numerical method for capturing the deformation behaviors of real bridge RC slabs", Proceedings of the Japan Society of Civil Engineers Hokkaido Branch, Sapporo, Japan, January.
  12. Li, V.C. and Matsumoto, T. (1998), "Fatigue crack growth analysis of fiber reinforced concrete with effect of interfacial bond degradation", Cement Concrete Compos., 20(5), 339-351. https://doi.org/10.1016/S0958-9465(98)00010-9.
  13. Mabsout, M., Tarhini, K., Jabakhanji, R. and Awwad, E. (2004), "Wheel load distribution in simply supported concrete slab bridges", J. Brid. Eng., 9(2), 147-155. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:2(147).
  14. Maeda, Y. and Matsui, S. (1984), "Fatigue of reinforced concrete slabs under trucking wheel load", Proceedings of the Japan Concr. Institute, 6, 221-224. (in Japanese)
  15. Maekawa, K., Pimanmas, A. and Okamura, H. (2003), Nonlinear Mechanics of Reinforced Concrete, Spon Press, London, UK.
  16. MARC (2018), Advanced Nonlinear Simulation Solution Programming Software MARC v. 2018, MSC Corporation, Newport Beach, California, USA. https://www.mscsoftware.com/product/marc.
  17. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending", Proceedings of the IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Lisbon, Portugal, September.
  18. Mitamura, H., Syakushiro, K., Matsumoto, T. and Matsui, S. (2012), "Experimental study on fatigue durability of RC deck slabs with overlay retrofit", J. Struct. Eng., 58(A), 1166-1177. https://doi.org/10.11532/structcivil.58A.1166.
  19. Muspratt, M.A. (1978), "Elastic analysis of slabs", Build. Environ., 13(1), 51-59. https://doi.org/10.1016/0360-1323(78)90008-2.
  20. NILIM (2015), Technical Note No. 844: Research on Fatigue Durability Evaluation for Highway Bridge Concrete Slabs, National Institute for Land and Infrastructure Management, Tokyo. (in Japanese)
  21. Okada, K., Okamura, H. and Sonoda, K. (1978), "Fatigue failure mechanism of reinforced concrete bridge deck slabs", Proceedings of the Brid. Eng. Conf., 1, 136-144.
  22. Park, N.H., Kang, Y.J., Choi, J.Y. and Lim, N.H. (2003), "Analytical and experimental study on the behavior of elastically supported reinforced concrete decks", Struct. Eng. Mech., 15(6), 629-651. https://doi.org/10.12989/sem.2003.15.6.629.
  23. Pedikaris, P.C., Beim, S.R. and Bousias, S.N. (1989), "Slab continuity effect on ultimate and fatigue strength of reinforced concrete bridge deck models", ACI Struc. J., 86(4), 483-491.
  24. Perdikaris, P.C. and Beim, S.R. (1988), "RC bridge decks under pulsating and moving load." J. Struct. Eng., 114(3), 591-607. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:3(591).
  25. Schlafli, M. and Bruhwiler, E. (1998), "Fatigue of existing reinforced concrete bridge deck slabs", Eng. Struct., 20(11), 991-998. https://doi.org/10.1016/S0141-0296(97)00194-6.
  26. Shakushiro, K., Mitamura, H., Watanabe, T. and Kishi, N. (2011), "Experimental study on fatigue durability of RC slabs reinforced with round steel bars", J Struct. Eng., 57(A), 1297-1304. https://doi.org/10.11532/structcivil.57A.1297.
  27. Suthiwarapirak, P. and Matsumoto, T. (2006), "Fatigue analysis of RC slabs and repaired RC slabs based on crack bridging degradation concept", J Struct. Eng., 132(6), 939-948. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:6(939).
  28. Yin, X., Liu, Y. and Kong, B. (2016), "Vibration behaviors of a damaged bridge under moving vehicular loads", Struct. Eng. Mech., 58(2), 199-216. https://doi.org/10.12989/sem.2016.58.2.199.
  29. Zhang, J. (1998), "Fatigue fracture of fiber reinforced concrete - an experimental and theoretical study", Ph.D. Thesis, Department of Structural Engineering, Technical University of Denmark.
  30. Zhang, J., Stang, H. and Li, V.C. (2001), "Crack bridging model for fibre reinforced concrete under fatigue tension", Int. J. Fatigue, 23(8), 655-670. https://doi.org/10.1016/S0142-1123(01)00041-X.