Computers and Concrete

  • 제29권4호
  • /
  • Pages.263-278
  • /
  • 2022
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of limestone calcined clay cement (LC3) on the fire safety of concrete structures

  • Gupta, Sanchit (Department of Civil Engineering, Indian Institute of Technology Indore) ;
  • Singh, Dheerendra (Department of Civil Engineering, Indian Institute of Technology Indore) ;
  • Gupta, Trilok (Department of Civil Engineering, College of Technology and Engineering, MPUAT) ;
  • Chaudhary, Sandeep (Department of Civil Engineering, Indian Institute of Technology Indore)
  • 투고 : 2021.05.10
  • 심사 : 2022.04.20
  • 발행 : 2022.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Limestone calcined clay cement (LC3) is a low carbon alternative to conventional cement. Literature shows that using limestone and calcined clay in LC3 increases the thermal degradation of LC3 pastes and can increase the magnitude of fire risk in LC3 concrete structures. Higher thermal degradation of LC3 paste prompts this study toward understanding the fire performance of LC3 concrete and the associated magnitude of fire risk. For fire performance, concrete prepared using ordinary Portland cement (OPC), pozzolanic Portland cement (PPC) and LC3 were exposed to 16 scenarios of different elevated temperatures (400℃, 600℃, 800℃, and 1000℃) for different durations (0.5 h, 1 h, 2 h, and 4 h). After exposure to elevated temperatures, mass loss, residual ultrasonic pulse velocity (rUPV) and residual compressive strength (rCS) were measured as the residual properties of concrete. XRD (X-ray diffraction), TGA (thermogravimetric analysis) and three-factor ANOVA (analysis of variance) are also used to compare the fire performance of LC3 with OPC and PPC. Monte Carlo simulation has been used to assess the magnitude of fire risk in LC3 structures and devise recommendations for the robust application of LC3. Results show that LC3 concrete has weaker fire performance, with average rCS being 11.06% and 1.73% lower than OPC and PPC concrete. Analysis of 106 fire scenarios, in Indian context, shows lower rCS and higher failure probability for LC3 (95.05%, 2.22%) than OPC (98.16%, 0.22%) and PPC (96.48%, 1.14%). For robust application, either LC3 can be restricted to residential and educational structures (failure probability <0.5%), or LC3 can have reserve strength (factor of safety >1.08).

키워드

과제정보

The authors acknowledge the support provided by Dr. Vinod Kumar and Sheetal Kumar Dewangan from the Indian Institute of Technology Indore for conducting the TGA of cement pastes. The authors also acknowledge the material and financial support provided by the Indian Institute of Technology Indore. The authors will also like to mention that this research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.

참고문헌

  1. Antoni, M., Rossen, J., Martirena, F. and Scrivener, K. (2012), "Cement substitution by a combination of metakaolin and limestone", Cement Concrete Res., 42, 1579-1589. https://doi.org/10.1016/j.cemconres.2012.09.006.
  2. Ashish, D.K. and Verma, S.K. (2019a), "Determination of optimum mixture design method for self-compacting concrete: Validation of method with experimental results", Constr. Build. Mater., 217, 664-678. https://doi.org/10.1016/j.conbuildmat.2019.05.034.
  3. Ashish, D.K. and Verma, S.K. (2019b), "Cementing efficiency of flash and rotary-calcined metakaolin in concrete", J. Mater. Civil Eng., 31, 04019307. https://doi.org/10.1061/(asce)mt.1943-5533.0002953.
  4. Ashish, D.K. and Verma, S.K. (2021), "Robustness of selfcompacting concrete containing waste foundry sand and metakaolin: A sustainable approach", J. Hazard. Mater., 401, 123329. https://doi.org/10.1016/j.jhazmat.2020.123329.
  5. Ashteyat, A.M., Ismeik, M. (2018), "Predicting residual compressive strength of self-compacted concrete under various temperatures and relative humidity conditions by artificial neural networks", Comput. Concrete, 21, 47-54. https://doi.org/10.12989/cac.2018.21.1.047.
  6. Babalola, O.E., Awoyera, P.O., Le, D.H. and Bendezu Romero, L.M. (2021), "A review of residual strength properties of normal and high strength concrete exposed to elevated temperatures: Impact of materials modification on behaviour of concrete composite", Constr. Build. Mater., 296, 123448. https://doi.org/10.1016/j.conbuildmat.2021.123448.
  7. Behnam, B., Ronagh, H.R. and Baji, H. (2013), "Methodology for investigating the behavior of reinforced concrete structures subjected to post earthquake fire", Adv. Concrete Constr., 1, 29-44. https://doi.org/10.12989/acc.2013.1.1.029.
  8. Benysek, M., Stefan, R., Prochazka, J. (2020), "Effect of fire model parameter variability on determination of fire resistance of concrete structural members", Solid State Phenom., 309, 208-215. https://doi.org/10.4028/www.scientific.net/SSP.309.208.
  9. Beycioglu, A., Gultekin, A., Aruntas, H.Y., Gencel, O., Dobiszewska, M. and Brostow, W. (2017), "Mechanical properties of blended cements at elevated temperatures predicted using a fuzzy logic model", Comput. Concrete, 20, 247-255. https://doi.org/10.12989/cac.2017.20.2.247.
  10. Blumauer, U., Hozjan, T., Trtnik, G. (2020), "Prediction of mechanical properties of limestone concrete after high temperature exposure with artificial neural networks", Adv. Concrete Constr., 10, 247-256. https://doi.org/10.12989/acc.2020.10.3.247.
  11. Cai, B., Hao, L., Fu, F. (2020), "Postfire reliability analysis of axial load bearing capacity of CFRP retrofitted concrete columns", Adv. Concrete Constr., 10, 289-299. https://doi.org/10.12989/acc.2020.10.4.289.
  12. Chen, Y., Romero Rodriguez, C., Li, Z., Chen, B., Copuroglu, O., Schlangen, E. (2020), "Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing" Cement Concrete Compos., 114. https://doi.org/10.1016/j.cemconcomp.2020.103708.
  13. EN 1991-1-7 (2006), Eurocode 1, Actions on structures-Part 1-7: General actions-Accidental actions, European Committee for Standardization, Brussels, Belgium.
  14. Ez-Zaki, H., Mwiti Marangu, J., Bellotto, M., Dalconi, M.C., Artioli, G. and Valentini, L. (2021), "A fresh view on limestone calcined clay cement (LC3) pastes", Mater., 14(11), 3037. https://doi.org/10.3390/ma14113037.
  15. Gettu, R., Patel, A., Rathi, V., Prakasan, S., Basavaraj, A.S., Palaniappan, S. and Maity, S. (2019), "Influence of supplementary cementitious materials on the sustainability parameters of cements and concretes in the Indian context", Mater. Struct. Constr., 52, 1-11. https://doi.org/10.1617/s11527-019-1321-5.
  16. Ghosh, P., Konecny, P., Lehner, P. and Tikalsky, P.J. (2017), "Probabilistic time-dependent sensitivity analysis of HPC bridge deck exposed to chlorides", Comput. Concrete, 19, 305-313. https://doi.org/10.12989/cac.2017.19.3.305.
  17. Gupta, S. and Chaudhary, S. (2020), "State of the art review on Supplementary Cementitious Materials in India-I: An overview of legal perspective, governing organizations, and development patterns", J. Clean. Prod., 261, 121203. https://doi.org/10.1016/j.jclepro.2020.121203.
  18. Gupta, T., Patel, K.A., Siddique, S., Sharma, R.K. and Chaudhary, S. (2019), "Prediction of mechanical properties of rubberised concrete exposed to elevated temperature using ANN", Meas. J. Int. Meas. Confed., 147, 106870. https://doi.org/10.1016/j.measurement.2019.106870.
  19. Gupta, T., Siddique, S., Sharma, R.K. and Chaudhary, S. (2017), "Effect of elevated temperature and cooling regimes on mechanical and durability properties of concrete containing waste rubber fiber", Constr. Build. Mater., 137, 35-45. https://doi.org/10.1016/j.conbuildmat.2017.01.065.
  20. Hay, R., Li, L. and Celik, K. (2022), "Shrinkage, hydration, and strength development of limestone calcined clay cement (LC3) with different sulfation levels", Cement Concrete Compos., 127, 104403. https://doi.org/10.1016/j.cemconcomp.2021.104403.
  21. Ibrahimbegovic, A., Boulkertous, A., Davenne, L., Muhasilovic, M. and Pokrklic, A. (2010), "On modeling of fire resistance tests on concrete and reinforced-concrete structures", Comput. Concrete, 7, 285-301. https://doi.org/10.12989/cac.2010.7.4.285.
  22. IS 10262 (2019), Concrete Mix Proportioning-Guidelines, Bureau of Indian Standards, New Delhi, India.
  23. IS 10331-1 (1992), Method of Non-Destructive Testing of Concrete, Part 1: Ultrasonic Pulse Velocity, Bureau of Indian Standards, New Delhi, India.
  24. IS 1641 (2013), Fire safety of buildings (general): General Principles of Fire Grading and Classification-Code of Practice, Bureau of Indian Standards, New Delhi, India.
  25. Krishnan, S. and Bishnoi, S. (2018), "Understanding the hydration of dolomite in cementitious systems with reactive aluminosilicates such as calcined clay", Cement Concrete Res., 108, 116-128. https://doi.org/10.1016/j.cemconres.2018.03.010.
  26. Krishnan, S. and Bishnoi, S. (2020), "A numerical approach for designing composite cements with calcined clay and limestone", Cement Concrete Res., 138, 106232. https://doi.org/10.1016/j.cemconres.2020.106232.
  27. Krishnan, S., Kanaujia, S.K., Mithia, S. and Bishnoi, S. (2018), "Hydration kinetics and mechanisms of carbonates from stone wastes in ternary blends with calcined clay", Constr. Build. Mater., 164, 265-274. https://doi.org/10.1016/j.conbuildmat.2017.12.240.
  28. Lin, R.S., Han, Y. and Wang, X.Y. (2021), "Macro-meso-micro experimental studies of calcined clay limestone cement (LC3) paste subjected to elevated temperature", Cement Concrete Compos., 116, 103871. https://doi.org/10.1016/j.cemconcomp.2020.103871.
  29. Ma, Q., Guo, R., Zhao, Z., Lin, Z. amd He, K. (2015), "Mechanical properties of concrete at high temperature-A review", Constr. Build. Mater., 93, 371-383. https://doi.org/10.1016/j.conbuildmat.2015.05.131.
  30. Malik, M., Bhattacharyya, S.K. and Barai, S.V. (2021), "Thermal and mechanical properties of concrete and its constituents at elevated temperatures: A review", Constr. Build. Mater., 270, 121398. https://doi.org/10.1016/j.conbuildmat.2020.121398.
  31. McNamee, M. et al. (2019), "IAFSS agenda 2030 for a fire safe world", Fire Saf. J., 110, 102889. https://doi.org/10.1016/j.firesaf.2019.102889.
  32. Mehra, P., Gupta, R.C. and Thomas, B.S. (2016), "Assessment of durability characteristics of cement concrete containing jarosite", J. Clean. Prod., 119, 59-65. https://doi.org/10.1016/j.jclepro.2016.01.055.
  33. Ministry of Home Affairs (2001), "Houselisting and Housing Census Data-2011", H-3B; Office of the Registrar General and Census Commissioner, Ministry of Home Affairs, India.
  34. Mohamedbhai, G.T.G. (1986), "Effect of exposure time and rates of heating and cooling on residual strength of heated concrete", Mag. Concrete Res., 38, 151-158. https://doi.org/10.1680/macr.1986.38.136.151.
  35. Nas, M. and Kurbetci, S. (2018), "Mechanical, durability and microstructure properties of concrete containing natural zeolite", Comput. Concrete, 22, 449-459. https://doi.org/10.12989/cac.2018.22.5.449.
  36. NCRB (2021), Accidental Deaths and Suicides in India (ADSI); National Crime Records Bureau, New Delhi, India.
  37. Rentier, G., Lelieveldt, H. and Kramer, G.J. (2019), "Varieties of coal-fired power phase-out across Europe", Ener. Policy, 132, 620-632. https://doi.org/10.1016/j.enpol.2019.05.042.
  38. Rodriguez, C. and Tobon, J.I. (2020), "Influence of calcined clay/limestone, sulfate and clinker proportions on cement performance", Constr. Build. Mater., 251, 119050. https://doi.org/10.1016/j.conbuildmat.2020.119050.
  39. Sahani, A.K., Samantaa, A.K. and Roy, D.K.S. (2019), "Influence of mineral by-products on compressive strength and microstructure of concrete at high temperature", Adv. Concrete Constr., 7, 263-275. https://doi.org/10.12989/acc.2019.7.4.263.
  40. Santarpia, L., Bologna, S., Ciancio, V., Golasi, I. and Salata, F. (2019), "Fire temperature based on the time and resistance of buildings-predicting the adoption of fire safety measures", Fire, 2, 1-12. https://doi.org/10.3390/fire2020019.
  41. Saridhe, S.P. and Selvaraj, T. (2021), "Reporting the ancient green construction technology of limecrete slabs adopted in Udaipur, Rajasthan", J. Clean. Prod., 279, 123682. https://doi.org/10.1016/j.jclepro.2020.123682.
  42. Savva, A., Manita, P. and Sideris, K.K. (2005), "Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates", Cement Concrete Compos., 27, 239-248. https://doi.org/10.1016/j.cemconcomp.2004.02.013.
  43. Scrivener, K., Martirena, F., Bishnoi, S. and Maity, S. (2018), "Calcined clay limestone cements (LC3)", Cement Concrete Res., 114, 49-56. https://doi.org/10.1016/j.cemconres.2017.08.017.
  44. Sharma, M., Bishnoi, S., Martirena, F. and Scrivener, K. (2021), "Limestone calcined clay cement and concrete: A state-of-the-art review", Cement Concrete Res., 149, 106564. https://doi.org/10.1016/j.cemconres.2021.106564.
  45. Shin, H., Kim, T.H., Kim, H., Lee, S. and Kim, W. (2019), "Environmental shutdown of coal-fired generators for greenhouse gas reduction: A case study of South Korea", Appl. Ener., 252, 113453. https://doi.org/10.1016/j.apenergy.2019.113453.
  46. SP 7 (2005), National Building Code of India 2005, Bureau of Indian Standards, New Delhi, India.
  47. WBCSD (2018), "Low Carbon Technology Roadmap for the Indian Cement Sector : Status Review 2018", World Buisness Council for Sustainable Development.
  48. Yu, J., Wu, H.L., Mishra, D.K., Li, G. and Leung, C.K. (2021), "Compressive strength and environmental impact of sustainable blended cement with high-dosage Limestone and Calcined Clay (LC2)", J. Clean. Prod., 278, 123616. https://doi.org/10.1016/j.jclepro.2020.123616.
  49. Zhang, D., Jaworska, B., Zhu, H., Dahlquist, K. and Li, V.C. (2020), "Engineered Cementitious Composites (ECC) with limestone calcined clay cement (LC3)", Cement Concrete Compos., 114, 103766. https://doi.org/10.1016/j.cemconcomp.2020.103766.