DOI QR코드

DOI QR Code

드론 무선 충전을 위한 고효율 송, 수신 코일 개발에 관한 연구

A Study on The Development of High-Efficiency Transmitting and Receiving Coils For Wireless Charging of Drones

  • 임종균 (한국폴리텍대학 스마트전자과)
  • Lim, Jong-Gyun (Dept. Smart Electronic Engineering, Korea Polytechnics)
  • 투고 : 2021.12.28
  • 심사 : 2022.04.17
  • 발행 : 2022.04.30

초록

본 연구에서는 드론을 무선으로 충전할 수 있는 고효율 무선 전력 전송 송, 수신 코일 개발에 대한 기술을 소개한다. 드론 스테이션은 드론의 배터리를 충전하기 위해 배터리를 분리 할 필요 없이 무선으로 배터리를 충전할 수 있는 기능을 지원한다. 드론의 배터리를 최단 시간 내에 충전하기 위해서는 무선 충전 효율이 높아야 한다. 드론 스테이션의 무선 충전 효율을 높이기 위해 고효율 송, 수신 코일 제작 방법과 성능 측정 방법을 제시하였다. 송, 수신 코일은 드론의 비행에 방해가 되지 않도록 드론의 크기와 무게를 고려하여 PCB 기판을 이용해 제작하였다. 송, 수신 코일 사이의 거리가 40mm 이상 떨어진 거리에서 88% 이상의 효율을 구현하였다.

In this paper, a technology for a high-efficiency wireless power transmission transmitting and receiving coil that can wirelessly charge a drone is introduced. The drone station implements the ability to charge the battery wirelessly without the need to remove the battery to charge the drone's battery. In order to charge the drone's battery in the shortest time, wireless charging efficiency must be high. In order to increase the wireless charging efficiency of the drone station, a method for manufacturing high-efficiency transmitting and receiving coils and a performance measurement method are presented. Transmitting and receiving coils were manufactured considering the size and weight of the drone so as not to interfere with the flight of the drone. Efficiency of 88% or more was realized at a distance of 40mm or more between the transmitting and receiving coils.

키워드

과제정보

위 논문은 "2021년 가을철학술대회 우수논문"입니다.

참고문헌

  1. M. Jeong, "Performance analysis of drone-type base station on the mmwave according to radio resource management policy," J. of the Korea Institute of Electronic Communication Sciences, vol. 14, no. 5, 2019, pp. 917-926.
  2. K. Kim, S. Lee, and Y. Jang, "A study on the measurement of the beam pattern of array antenna for VHF radar using active beam pattern measurement device and drone," J. of the Korea Institute of Electronic Communication Sciences, vol. 14, no. 6, 2019, pp. 1031-1036. https://doi.org/10.13067/JKIECS.2019.14.6.1031
  3. J. Choi, B. Kim, J. Yu, J. Choi, and S. Lee, "PID controled UAV monitoring system for fire-event detection," J. of the Korea Institute of Electronic Communication Sciences, vol. 15, no. 1, 2020, pp. 1-8. https://doi.org/10.13067/JKIECS.2020.15.1.1
  4. K. Nam and M. Jang, "A study on the exploration device of the disaster site using drones," J. of the Korea Institute of Electronic Communication Sciences, vol. 14, no. 3, 2019, pp. 579-586. https://doi.org/10.13067/JKIECS.2019.14.3.579
  5. P. K. Chittoor, B. Chokkalingam, and L. Mihet-Popa, "A review on UAV wireless charging: fundamentals, applications, charging techniques and standards," IEEE Access, vol. 9, May 2021, pp. 69235-69266. https://doi.org/10.1109/ACCESS.2021.3077041
  6. J. Kim, M. Han, and H. Sohn, "Magnetic resonance-nased wireless power transmission through concrete structures," Journal of electromagnetic engineering and science, vol. 15, no. 2, Apr. 2015, pp. 104-110. https://doi.org/10.5515/JKIEES.2015.15.2.104
  7. S. S. Mohan, M. del M. Hershenson, S. P. Boyd, and T. Lee, "Simple accurate expressions for planar spiral inductances," IEEE Journal of Solid-State Circuits, vol. 34, no. 10, Oct. 1999, pp. 1419-1424. https://doi.org/10.1109/4.792620
  8. U. Jow and M. Ghovanloo, "Design and optimization of printed spiral coils for efficient transcutaneous inductive power transmission," IEEE Transactions on Biomedical Circuits and Systems, vol. 1, no. 3, Sept. 2007, pp. 193-202. https://doi.org/10.1109/TBCAS.2007.913130
  9. J. Lim and D. Lee, "A technology trend and analysis of electric vehicle wireless charging system," J. of the Korea Institute of Electronic Communication Sciences, vol. 16, no. 2, 2021, pp. 255-260. https://doi.org/10.13067/JKIECS.2021.16.2.255
  10. A. P. Sample, D. T. Meyer, and J. R. Smith, "Analysis, experimental results, and range adaptation of magnetically coupled resonators for wireless power transfer," IEEE Transactions on Industrial Electronics, vol. 58, no. 2, Feb. 2011, pp. 544-554. https://doi.org/10.1109/TIE.2010.2046002