과제정보
This research was supported in part by Key Project of Scientific Research Fund (grant No.17A071) from Education Department of Hunan Province, the independent research project fund from the State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body in Hunan University (grant No. 71865006) and the Fundamental Research Funds for the Central Universities (grant No. 531118010047).
참고문헌
- Ahmad, J., Cheng, S. and Ghrib, F. (2018), "Combined effect of external damper and crosstie on the modal response of hybrid two-cable networks", J. Sound Vib., 417, 132-148. https://doi.org/10.1016/j.jsv.2017.12.023
- Aly, A.M., Zasso, A. and Resta, F. (2011), "On the dynamics of a very slender building under winds: response reduction using M R dampers with lever mechanism", Struct. Des. Tall Special Build., 20(5), 539-551. https://doi.org/10.1002/tal.647
- Benavent-Climent, A. (2011), "An energy based method for seismic retrofit of existing frames using hysteretic dampers", Soil Dyn. Earthq. Eng., 31(10), 1385-1396. https://doi.org/10.1016/j.soildyn.2011.05.015
- Caracoglia, L. and Jones, N.P. (2007), "Passive hybrid technique for the vibration mitigation of systems of interconnected stays", J. Sound Vib., 307(3-5), 849-864. https://doi.org/10.1016/j.jsv.2007.07.022
- Chen, Z.Q., Wang, X.Y., Ko, J.M., Ni, Y.Q., Spencer Jr, B.F., Yang, G. and Hu, J.H. (2004), "MR damping system for mitigating wind-rain induced vibration on Dongting Lake Cable-Stayed Bridge", Wind Struct., Int. J., 7(5), 293-304. https://doi.org/10.12989/was.2004.7.5.293
- Choi, S.-W. and Kim, H.-K. (2008), "Design of aerodynamic stabilizing cables for a cable-stayed bridge during construction", Wind Struct., Int. J., 11(5), 391-411. https://doi.org/10.12989/was.2008.11.5.391
- Duan, Y., Ni, Y.-Q., Zhang, H., Spencer, B.F.J., Ko, J.-M. and Fang, Y. (2019), "Design formulas for vibration control of taut cables using passive MR dampers", Smart Struct. Syst., Int. J., 23(6), 521-536. https://doi.org/10.12989/sss.2019.23.6.521
- Ernst, J.H. (1965), "Der E-modul von seilen under berucksichtigung des durchhanges", Bauing, 40(2), 52-55.
- Fan, S. (1989), "A new extracting formula and a new distinguishing means on the one variable cubic equation", J. Hainan Normal Univ. (Nat. Sci.), 2(2), 91-98.
- Feng, Z.Q., Zhao, B., Hua, X.G. and Chen, Z.Q. (2019), "Enhanced EMD-RDT Method for Output-Only Ambient Modal Identification of Structures", J. Aerosp. Eng., 32(4), 04019046. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001034
- Gao, H., Wang, H., Li, J., Wang, Z., Liang, R., Xu, Z. and Ni, Y. (2021), "Optimum design of viscous inerter damper targeting multi-mode vibration mitigation of stay cables", Eng. Struct., 226, 111375. https://doi.org/10.1016/j.engstruct.2020.111375
- Huang, Z.W., Hua, X.G., Chen, Z.Q. and Niu, H.W. (2018), "Modeling, Testing, and Validation of an Eddy Current Damper for Structural Vibration Control", J. Aerosp. Eng., 31(5), 04018063. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000891
- Huang, Z., Hua, X., Chen, Z. and Niu, H. (2019), "Performance evaluation of inerter-based damping devices for structural vibration control of stay cables", Smart Struct. Syst., Int. J., 23(6), 615-626. https://doi.org/10.12989/sss.2019.23.6.615
- Ikago, K., Saito, K. and Inoue, N. (2012a), "Seismic control of single-degree-of-freedom structure using tuned viscous mass damper", Earthq. Eng. Struct. Dyn., 41(3), 453-474. https://doi.org/10.1002/eqe.1138
- Ikago, K., Sugimura, Y., Saito, K. and Inoue, N. (2012b), "Modal Response Characteristics of a Multiple-Degree-Of-Freedom Structure Incorporated with Tuned Viscous Mass Dampers", J. Asian Architect. Build. Eng., 11(2), 375-382. https://doi.org/10.3130/jaabe.11.375
- Kim, H.-K., Kim, K.-T., Lee, H. and Kim, S. (2013), "Performance of Unpretensioned Wind Stabilizing Cables in the Construction of a Cable-Stayed Bridge", J. Bridge Eng., 18(8), 722-734. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000405
- Lazar, L.F., Neild, S.A. and Wagg, D.J. (2014), "Using an inerter-based device for structural vibration suppression", Earthq. Eng. Struct. Dyn., 43(8), 1129-1147. https://doi.org/10.1002/eqe.2390
- Li, H., Liu, M., Li, J., Guan, X. and Ou, J. (2007), "Vibration Control of Stay Cables of the Shandong Binzhou Yellow River Highway Bridge Using Magnetorheological Fluid Dampers", J. Bridge Eng., 12(4), 401-409. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:4(401)
- Li, L., Song, G. and Ou, J. (2011), "Hybrid active mass damper (AMD) vibration suppression of nonlinear high-rise structure us-ing fuzzy logic control algorithm under earthquake excitations", Struct. Control Health Monitor., 18(6), 698-709. https://doi.org/10.1002/stc.402
- Liang, L., Feng, Z. and Chen, Z. (2019), "Seismic control of SDOF systems with nonlinear eddy current dampers", Appl. Sci., 9(16), 3427. https://doi.org/10.3390/app9163427
- Lin, W.-H. and Chopra, A.K. (2002), "Earthquake response of elastic SDF systems with non-linear fluid viscous dampers", Earthq. Eng. Struct. Dyn., 31(9), 1623-1642. https://doi.org/10.1002/eqe.179
- Lin, W., Song, G. and Chen, S. (2017), "PTMD Control on a Benchmark TV Tower under Earthquake and Wind Load Excitations", Appl. Sci.-Basel, 7(4), 425. https://doi.org/10.3390/app7040425
- Liu, W., Guo, Y., Dong, X. and He, W. (2019), "Earthquake response control of a super high-rise structure subjected to long-period ground motions via a novel viscous damped system with multilever mechanism", Struct. Des. Tall Special Build., 28(7), e1600. https://doi.org/10.1002/tal.1600
- Lu, X., Zhang, Q., Weng, D., Zhou, Z., Wang, S., Mahin, S.A., Ding, S. and Qian, F. (2017), "Improving performance of a super tall building using a new eddy-current tuned mass damper", Struct. Control Health Monitor., 24(3), e1882. https://doi.org/10.1002/stc.1882
- Mao, J.-X., Wang, H., Feng, D.-M., Tao, T.-Y. and Zheng, W.-Z. (2018), "Investigation of dynamic properties of long-span cable stayed bridges based on one-year monitoring data under normal operating condition", Struct. Control Health Monitor., 25(5), e2146. https://doi.org/10.1002/stc.2146
- Ni, Y.Q., Wang, J.Y. and Lo, L.C. (2005), "Influence of Stabilizing Cables on Seismic Response of a Multispan Cable Stayed Bridge", Comput.-Aided Civil Infrastruct. Eng., 20(2), 142-153. https://doi.org/10.1111/j.1467-8667.2005.00383.x
- Niu, H., Chen, Z., Hua, X. and Zhang, W. (2018), "Mitigation of wind-induced vibrations of bridge hangers using tuned mass dampers with eddy current damping", Smart Struct. Syst., Int. J., 22(6), 727-741. https://doi.org/10.12989/sss.2018.22.6.727
- Pan, C. and Zhang, R. (2018), "Design of structure with inerter system based on stochastic response mitigation ratio", Struct. Control Health Monitor., 25(6), e2169. https://doi.org/10.1002/stc.2169
- Pan, C., Zhang, R., Luo, H., Li, C. and Shen, H. (2018), "Demand-based optimal design of oscillator with parallel-layout viscous in-erter damper", Struct. Control Health Monitor., 25(1), e2051. https://doi.org/10.1002/stc.2051
- Roy, S., Park, Y.C., Sause, R. and Fisher, J.W. (2012), "Fatigue Performance of Stiffened Pole-to-Base Plate Socket Connections in High-Mast Structures", J. Struct. Eng., 138(10), 1203-1213. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000554
- Shen, W., Niyitangamahoro, A., Feng, Z. and Zhu, H. (2019), "Tuned inerter dampers for civil structures subjected to earthquake ground motions: optimum design and seismic performance", Eng. Struct., 198, 109470. https://doi.org/10.1016/j.engstruct.2019.109470
- Shi, X., Zhu, S., Li, J.-Y. and Spencer Jr., B.F. (2016), "Dynamic behavior of stay cables with passive negative stiffness dampers", Smart Mater. Struct., 25(7), 075044. https://doi.org/10.1088/0964-1726/25/7/075044
- Sorace, S. and Terenzi, G. (2012a), "The damped cable system for seismic protection of frame structures - Part I: General concepts, testing and modeling", Earthq. Eng. Struct. Dyn., 41(5), 915-928. https://doi.org/10.1002/eqe.1166
- Sorace, S. and Terenzi, G. (2012b), "The damped cable system for seismic protection of frame structures - Part II: Design and appli-cation", Earthq. Eng. Struct. Dyn., 41(5), 929-947. https://doi.org/10.1002/eqe.1165
- Suarez, E., Roldan, A., Gallego, A. and Benavent-Climent, A. (2017), "Entropy analysis for damage quantification of hysteretic dampers used as seismic protection of buildings", Appl. Sci., 7(6), 628. https://doi.org/10.3390/app7060628
- Sun, C., Jahangiri, V. and Sun, H. (2019a), "Performance of a 3D pendulum tuned mass damper in offshore wind turbines under multiple hazards and system variations", Smart Struct. Syst., Int. J., 24(1), 53-65. https://doi.org/10.12989/sss.2019.24.1.053
- Sun, H., Zuo, L., Wang, X., Peng, J. and Wang, W. (2019b), "Exact H 2 optimal solutions to inerter-based isolation systems for building structures", Struct. Control Health Monitor., 26(6), e2357. https://doi.org/10.1002/stc.2357
- Wang, Z., Gao, H., Xu, Y., Chen, Z. and Wang, H. (2019a), "Impact of cable sag on the efficiency of an inertial mass damper in controlling stay cable vibrations", Smart Struct. Syst., Int. J., 24(1), 83-94. https://doi.org/10.12989/sss.2019.24.1.083
- Wang, Z.H., Xu, Y.W., Gao, H., Chen, Z.Q., Xu, K. and Zhao, S.B. (2019b), "Vibration control of a stay cable with a rotary electromagnetic inertial mass damper", Smart Struct. Syst., Int. J., 23(6), 627-639. https://doi.org/10.12989/sss.2019.23.6.627
- Wen, Y., Chen, Z. and Hua, X. (2017), "Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures", J. Struct. Eng., 143(4), 04016207. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001680
- Yamaguchi, H. and Nagahawatta, H.D. (1995), "Damping effects of cable cross ties in cable-stayed bridges", J. Wind Eng. Indust. Aerodyn., 54-55, 35-43. https://doi.org/10.1016/0167-6105(94)00027-B
- Yu, J., Tang, Y., Zhu, Y., Yu, P. and Wang, X. (2014), "A compound damping cable system", Chinese Invention Patent, CN104404886B.
- Yu, J., Duan, Z., Zhang, X., Peng, J., Zhao, Y. (2021), "Wind-Induced Vibration Control of High-Rise Structures Using Compound Damping Cables", Shock Vib., 2021, 5537622. https://doi.org/10.1155/2021/5537622
- Zahrai, S.M. and Froozanfar, M. (2019), "Performance of passive and active MTMDs in seismic response of Ahvaz cable-stayed bridge", Smart Struct. Syst., Int. J., 23(5), 449-466. https://doi.org/10.12989/sss.2019.23.5.449
- Zhang, P., Song, G., Li, H.-N. and Lin, Y.-X. (2013), "Seismic Control of Power Transmission Tower Using Pounding TMD", J. Eng. Mech., 139(10), 1395-1406. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000576
- Zhang, Z., Nielsen, S.R.K., Basu, B. and Li, J. (2015), "Nonlinear modeling of tuned liquid dampers (TLDs) in rotating wind turbine blades for damping edgewise vibrations", J. Fluids Struct., 59, 252-269. https://doi.org/10.1016/j.jfluidstructs.2015.09.006
- Zhang, Z., Staino, A., Basu, B. and Nielsen, S.R.K. (2016), "Performance evaluation of full-scale tuned liquid dampers (TLDs) for vibration control of large wind turbines using real time hybrid testing", Eng. Struct., 126, 417-431. https://doi.org/10.1016/j.engstruct.2016.07.008
- Zhang, R., Ni, Y.-Q., Duan, Y. and Ko, J.-M. (2019a), "Development of a full-scale magnetorheological damper model for open-loop cable vibration control", Smart Struct. Syst., Int. J., 23(6), 553-564. https://doi.org/10.12989/sss.2019.23.6.553
- Zhang, R., Zhao, Z. and Dai, K. (2019b), "Seismic response mitigation of a wind turbine tower using a tuned parallel inerter mass system", Eng. Struct., 180, 29-39. https://doi.org/10.1016/j.engstruct.2018.11.020
- Zhou, H., Yang, X., Sun, L. and Xing, F. (2015), "Free vibrations of a two-cable network with near-support dampers and a crosslink", Struct. Control Health Monitor., 22(9), 1173-1192. https://doi.org/10.1002/stc.1738
- Zuo, L., Chen, X. and Nayfeh, S. (2011), "Design and Analysis of a New Type of Electromagnetic Damper with Increased Energy Density", J. Vib. Acoust., 133(4), 041006. https://doi.org/10.1115/1.4003407.
- Zuo, H., Bi, K. and Hao, H. (2017), "Using multiple tuned mass dampers to control offshore wind turbine vibrations under multi-ple hazards", Eng. Struct., 141, 303-315. https://doi.org/10.1016/j.engstruct.2017.03.006