Advances in aircraft and spacecraft science

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Process of pulsations of the spherical cavity in a liquid under the influence of ultrasonic vibrations

  • Kuznetsova, Elena L. (Department of Engineering Graphics, Moscow Aviation Institute (National Research University)) ;
  • Starovoitov, Eduard I. (Department of Building Mechanics, Belarusian State University of Transport) ;
  • Vakhneev, Sergey (Department of Engineering Graphics, Moscow Aviation Institute (National Research University)) ;
  • Kutina, Elena V. (Department of Advanced Materials and Technologies for Aerospace Applications, Moscow Aviation Institute (National Research University))
  • Received : 2020.08.19
  • Accepted : 2021.05.11
  • Published : 2022.03.25
Download PDF
⟨ Previous Next ⟩

Abstract

The paper investigates the process of pulsation of a spherical cavity (bubble) in a liquid under the influence of a source of ultrasonic vibrations. The process of pulsation of a cavitation pocket in liquid is investigated. The Kirkwood-Bethe model was used to describe the motion. A numerical solution algorithm based on the Runge-Kutta-Felberg method of 4-5th order with adaptive selection of the integration step has been developed and implemented. It was revealed that if the initial bubble radius exceeds a certain value, then the bubble will perform several pulsations until the moment of collapse. The same applies to the case of exceeding the amplitude of ultrasonic vibrations of a certain value. The proposed algorithm makes it possible to fully describe the process of cavitation pulsations, to carry out comprehensive parametric studies and to evaluate the influence of various process parameters on the intensity of cavitation.

Keywords

Acknowledgement

The work was carried out with the financial support of the grant RFBR N 20-08-00707 A.

References

  1. Akhonin, S.V., Berezos, V.O., Bondar, O.I., Glukhenkyi, O.I., Goryslavets, Y.M. and Severin, A.Y. (2021), "Mathematical modeling of hydrodynamic and thermal processes", Paton Weld. J., 8, 38-44.
  2. Antufev, B.A., Egorova, O.V. and Rabinskiy, L.N. (2019b), "Dynamics of a cylindrical shell with a collapsing elastic base under the action of a pressure wave", INCAS Bull., 11, 17-24.
  3. Antufev, B.A., Egorova, O.V., Medvedskii, A.L. and Rabinskiy, L.N. (2019a), "Dynamics of shell with destructive heat-protective coating under running load", INCAS Bull., 11, 7-16.
  4. Babaytsev, A.V., Kuznetsova, E.L., Rabinskiy, L.N. and Tushavina, O.V. (2020), "Investigation of permanent strains in nanomodified composites after molding at elevated temperatures", Periodico Tche Quimica, 17(34), 1055-1067.
  5. Bobyr, S.V. (2021), "Development and application of a simple model for calculating the quantum diffusion parameters of rubidium, hydrogen, and deuterium atoms", Sci. Herald Uzhhorod Univ. Series "Physics", 49, 19-25.
  6. Bodryshev, V.V., Babaytsev, A.V., Orekhov, A.A. and Min, Y.N. (2021), "Digital method for analysing speckle-interferometric images of material deformation", Period. Eng. Nat. Sci., 9(3), 886-900. http://doi.org/10.21533/pen.v9i3.2321.
  7. Bulychev, N.A. and Rabinskiy, L.N. (2019), "Ceramic nanostructures obtained by acoustoplasma technique", Nanos. Tech., 10(3), 279-286. http://doi.org/10.1615/NanoSciTechnolIntJ.2019031161.
  8. Bulychev, N.A., Bodryshev, V.V. and Rabinskiy, L.N. (2019a), "Analysis of geometric characteristics of two-phase polymer-solvent systems during the separation of solutions according to the intensity of the image of micrographs", Periodico Tche Quimica, 16(32), 551-559.
  9. Bulychev, N.A., Kuznetsova, E.L., Rabinskiy, L.N. and Tushavina, O.V. (2019b), "Theoretical investigation of temperature-gradient induced glass cutting", Nanosci. Tech., 10(2), 123-131. http://doi.org/10.1615/NanoSciTechnolIntJ.2019030139.
  10. Burova, A.Y., Ryapukhin, A.V. and Muntyan, A.R. (2020), "Reduced hardware costs with software and hardware implementation of digital methods multistage discrete Fourier transform on programmable logic devices", Amazonia Investiga, 9(27), 227-233. https://doi.org/10.34069/AI/2020.27.03.24.
  11. Dobryanskiy, V.N., Rabinskiy, L.N. and Tushavina, O.V. (2019a), "Validation of methodology for modeling effects of loss of stability in thin-walled parts manufactured using SLM technology", Periodico Tche Quimica, 16(33), 650-656.
  12. Dobryanskiy, V.N., Rabinskiy, L.N. and Tushavina, O.V. (2019b), "Experimental finding of fracture toughness characteristics and theoretical modeling of crack propagation processes in carbon fiber samples under conditions of additive production", Periodico Tche Quimica, 16(33), 325-336.
  13. Egorova, O.V., Rabinskiy, L.N. and Zhavoronok, S.I. (2020), "Use of the higher-order plate theory of I.N. Vekua type in problems of dynamics of heterogeneous plane waveguides", Arch. Mech., 72(1), 3-25. https://doi.org/10.24423/aom.3074.
  14. Kurbatov, A.S., Orekhov, A.A., Rabinskiy, L.N., Tushavina, O.V. and Kuznetsova, E.L. (2020), "Research of the problem of loss of stability of cylindrical thin walled structures under intense local temperature exposure", Periodico Tche Quimica, 17(34), 884-891.
  15. Kuznetsova, E.L. and Rabinskiy, L.N. (2019), "Linearization of radiant heat fluxes in the mathematical modeling of growing bodies by the action of high temperatures in additive manufacturing", Asia Life Sci., 2, 943-954.
  16. Li, Y., Dobryanskiy, V.N. and Orekhov, A.A. (2020), "Modelling of crack development processes in composite elements based on virtual crack closure technique and cohesive zone model", Periodico Tche Quimica, 17(35), 591-598.
  17. Nesterenkov, V.M., Zagornikov, V.I., Orsa, Y.V., Zabolotnyi, S.D. and Belyaev, A.S. (2021), "Investigation of structure, mechanical and thermophysical properties of electron beam modified welds", Paton Weld. J., 3, 36-42.
  18. Orekhov, A.A., Rabinskiy, L.N., Fedotenkov, G.V. and Hein, T.Z. (2021), "Heating of a half-space by a moving thermal laser pulse source", Lobachevskii J. Math., 42(8), 1912-1919. https://doi.org/10.1134/S1995080221080229.
  19. Pirsol, I. (1975), Cavitation, Mir, Moscow.
  20. Pogodin, V.A., Astapov, A.N. and Rabinskiy, L.N. (2020), "CCCM specific surface estimation in process of low-temperature oxidation", Periodico Tche Quimica, 17(34), 793-802.
  21. Rabinskii, L.N. and Tushavina, O.V. (2019a), "Composite heat shields in intense energy fluxes with diffusion", Russ. Eng. Res., 39(9), 800-803. https://doi.org/10.3103/S1068798X1909017X.
  22. Rabinskiy, L.N. and Tushavina, O.V. (2019b), "Investigation of an elastic curvilinear cylindrical shell in the shape of a parabolic cylinder, taking into account thermal effects during laser sintering", Asia Life Sci., 2, 977-991.
  23. Rabinskiy, L.N. and Tushavina, O.V. (2019c), "Problems of land reclamation and heat protection of biological objects against contamination by the aviation and rocket launch site", J. Envir. Manag. Tour., 10(5), 967-973. https://doi.org/10.14505/jemt.v10.5(37).03.
  24. Rabinskiy, L.N., Tushavina, O.V. and Formalev, V.F. (2019), "Mathematical modeling of heat and mass transfer in shock layer on dimmed bodies at aerodynamic heating of aircraft", Asia Life Sci., 2, 897-911.
  25. Rosenberg, L.D. (1968), Cavitation Area, Physics and Technique of Powerful Ultrasound, Book II, Powerful Ultrasonic Fields, Nauka, Moscow.
  26. Rozhdestvensky, V.V. (1977), Cavitation, Shipbuilding, Leningrad.
  27. Sha, M., Volkov, A.V., Orekhov, A.A. and Kuznetsova, E.L. (2021), "Micro-dilatation effectsin a two-layered porous structure under uniform heating", J. Balkan Tribol. Assoc., 27(2), 280-294.
  28. Sun, Y., Antufev, B.A., Orekhov, A.A. and Egorova, O.V. (2020), "Geometrically nonlinear plate bending under the action of moving load", J. Appl. Eng. Sci., 18(4), 665-670. https://doi.org/10.5937/jaes0-28036.
  29. Tsybulevsky, S.E., Murakaev, I.M., Studnikov, P.E. and Ryapukhin, A.V. (2019), "Approaches to the clustering methodology in the rocket and space industry as a factor in the formation of a universal production model for the economic development in the space industry", INCAS Bull., 11, 213-220. https://doi.org/10.13111/2066-8201.2019.11.s.21
  30. Utkin, Y.A., Orekhov, A.A. and Hein, T.Z. (2021), "Tribological properties of polymer composite with impregnated quasicrystal nanoparticles", Int. J. Mech., 15, 189-195. https://doi.org/10.46300/9104.2021.15.22
  31. Zhavoronok, S.I., Kurbatov, A.S., Orekhov, A.A. and Rabinskii, L.N. (2019), "Stability of panels of a thermoelastic shell heated at the edge by a mobile point source", Russian Eng. Res., 39(9), 793-796. https://doi.org/10.3103/S1068798X19090259.
  32. Zhuravlov, O.Y., Shyian, O.V., Shirokov, B.M., Kolodiy, I.V. and Sholohov, S.M. (2021), "Sublimation process for obtaining silicon films from molybdenum and tungsten disilicide", Sci. Herald Uzhhorod Univ. Series "Physics", 49, 48-53.