Geomechanics and Engineering

  • 제28권6호
  • /
  • Pages.625-636
  • /
  • 2022
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Determining N value from SPT blows for 30 cm penetration in weathered strata

  • Sun, Chang-Guk (Earthquake Research Center, Korea Institute of Geoscience and Mineral Resources) ;
  • Cho, Hyung-Ik (Earthquake Research Center, Korea Institute of Geoscience and Mineral Resources) ;
  • Kim, Han-Saem (Earthquake Research Center, Korea Institute of Geoscience and Mineral Resources) ;
  • Lee, Moon-Gyo (Earthquake Research Center, Korea Institute of Geoscience and Mineral Resources)
  • 투고 : 2021.12.02
  • 심사 : 2022.01.24
  • 발행 : 2022.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

The standard penetration test (SPT) obtaining the N value of the number of blows has been widely used in various subsurface conditions, including in weathered soil and rock on fresh bedrock, in geotechnical studies pertaining to the design of foundations and earth structures. This study examined the applicability of SPTs terminated conventionally after 50 blows for a penetration of less than 30 cm, particularly in weathered strata, at four sites in Korea. The N values obtained during practical SPTs are typically extrapolated linearly at 30 cm penetration, despite the possibility of a nonlinear relationship between blow counts and penetration. Such nonlinearity in weathered strata has been verified by performing special SPTs ensuring 30 cm penetration. To quantify the nonlinearity in dense strata, we conducted statistical regression analyses comparing the differences (DN) between the N values measured by the special SPTs and those extrapolated using the practical approach with the differences (DP) between the 30 cm penetration and the penetration during 50 blows. Bi-linear relationship models between DN and DP were subsequently proposed for determining the N values at 30 cm penetration in weathered strata. The N values reflecting nonlinearity could be determined from the linearly extrapolated N values by adding a modeled DN value.

키워드

과제정보

This research was supported by the Basic Research Project of the Korea Institute of Geoscience and Mineral Resources (KIGAM).

참고문헌

  1. AASHTO (2007), Standard specifications for highway bridge, 18th edition. American Association of State Highway and Transportation Officials, Washington DC, USA.
  2. ASTM (2011), ASTM D6066-11: Standard practice for determining the normalized penetration resistance of sands for evaluation of liquefaction potential. American Society for Testing and Materials International, West Conshohocken, PA, USA.
  3. ASTM (2018), ASTM D1586/D1586M-18: Standard test method for standard penetration test (SPT) and split-barrel sampling of soils. American Society for Testing and Materials International, West Conshohocken, PA, USA.
  4. Anbazhagan, P., Sheikh, M.N. and Parihar, A. (2013), "Influence of rock depth on seismic site classification for shallow bedrock regions", Nat. Hazards Rev., 14(2), 108-121. https://doi.org/10.1061/(ASCE)NH.1527-6996.0000088.
  5. Bajaj, K. and Anbazhagan, P. (2019), "Seismic site classification and correlation between VS and SPT-N for deep soil sites in Indo-Gangetic Basin", J. Appl. Geophys., 163, 55-72. https://doi.org/10.1016/j.jappgeo.2019.02.011.
  6. Bowles, J.E. (1997), Foundation Analysis and Design. McGraw-Hill, Singapore.
  7. BSI (2007), BS EN ISO 22476-3:2005+A1:2001: Geotechnical investigation and testing-Field testing-Part 3: Standard penetration test. British Standards Institution, London, UK.
  8. Cho, H.I., Sun, C.G., Kim, J.H. and Kim, D.S. (2018), "OCR evaluation of cohesionless soil in centrifuge model using shear wave velocity", Geomech. Eng., 15(4), 987-995. https://doi.org/10.12989/gae.2018.15.4.987.
  9. dos Santos, M.D. and Bicalho, K.V. (2017), "Proposals of SPT-CPT and DPL-CPT correlations for sandy soils in Brazil", J. Rock Mech. Geotech. Eng., 9(6), 1152-1158. https://doi.org/10.1016/j.jrmge.2017.08.001.
  10. Dung, N.T., Chung, S.G., Kim, S.R. and Baek, S.H. (2011), "Applicability of the SPT-based methods for estimating toe bearing capacity of driven PHC piles in the thick deltaic deposits", KSCE J. Civil Eng., 15(6), 1023-1031. https://doi.org/10.1007/s12205-011-0801-0.
  11. ErzIn, Y. and Gul, T.O. (2013), "The use of neural networks for the prediction of the settlement of pad footings on cohesionless soils based on standard penetration test", Geomech. Eng., 5(6), 541-564. https://doi.org/10.12989/gae.2013.5.6.541.
  12. FHWA (2006), Soils and foundations: Reference manual -Volume I. National Highway Institute, Federal Highways Administration, Washington DC, USA
  13. Ghali, M., Chekired, M. and Karray, M. (2020), "Framework to improve the correlation of SPT-N and geotechnical parameters in sand", Acta Geotechnica, 15(3), 735-759. https://doi.org/10.1007/s11440-018-0745-3.
  14. Goh, A.T.C., Zhang, R.H., Wang, W., Wang, L., Liu, H.L. and Zhang, W.G. (2020), "Numerical study of the effects of groundwater drawdown on ground settlement for excavation in residual soils", Acta Geotechnica, 15(5), 1259-1272. https://doi.org/10.1007/s11440-019-00843-5.
  15. Gui, M.W., Soga, K., Bolton, M.D. and Hamelin, J.P. (2002), "Instrumented borehole drilling for subsurface investigation", J. Geotech. Geoenviron. Eng., 128(4), 283-291. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:4(283).
  16. Guo, W.D. (2012), Theory and Practice of Pile Foundations, 1st edition. CRC Press, Boca Raton, FL, USA
  17. Han, L., Wang, L., Ding, X., Wen, H., Yuan, X. and Zhang, W. (2022), "Similarity quantification of soil parametric data and sites using confidence ellipses", Geosci. Frontiers, 13(1), 101280. https://doi.org/10.1016/j.gsf.2021.101280.
  18. Jeong, S., Park, J., Ko, J. and Kim, B. (2017), "Analysis of soil resistance on drilled shafts using proposed cyclic p-y curves in weathered soil", Geomech. Eng., 12(3), 505-522. https://doi.org/10.12989/gae.2017.12.3.505.
  19. KSA (2017), KS F 2307: Standard test method for standard penetration test. Korea Standards Association, Seoul, Korea
  20. Kulhawy, F.H. and Mayne, P.W. (1990), "Manual on estimating soil properties for foundation design", Electric Power Research Institute, Palo Alto, CA, USA.
  21. Liao, S.S.C. and Whitman, R.V. (1986), "Overburden correction factors for SPT in sand", J. Geotech. Eng., 112(3), 373-377. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:3(373).
  22. Matsumoto, T., Phan, L.T., Oshima, A. and Shimono, S. (2015), "Measurements of driving energy in SPT and various dynamic cone penetration tests", Soils Found., 55(1), 201-212. https://doi.org/10.1016/j.sandf.2014.12.016.
  23. Mujtaba, H., Farooq, K., Sivakugan, N. and Das, B.M. (2018), "Evaluation of relative density and friction angle based on SPT-N values", KSCE J. Civil Eng., 12(2), 572-581. https://doi.org/10.1007/s12205-017-1899-5.
  24. Muduli, P.K. and Das, S.K. (2015), "Model uncertainty of SPT-based method for evaluation of seismic soil liquefaction potential using multi-gene genetic programming", Soils Found., 55(2), 258-275. https://doi.org/10.1016/j.sandf.2015.02.003.
  25. Oh, S. and Sun, C.G. (2008), "Combined analysis of electrical resistivity and geotechnical SPT blow counts for the safety assessment of fill dam", Environ. Geol., 54(1), 31-42. https://doi.org/10.1007/s00254-007-0790-y.
  26. Robert, Y. (1997), "A few comments on pile design", Can. Geotech. J., 34(4), 560-567. https://doi.org/10.1139/t97-024.
  27. Rogers, J.D. (2006), "Subsurface exploration using the standard penetration test and the cone penetration test", Environ. Eng. Geosci., 12(2), 161-179. https://doi.org/10.2113/12.2.161.
  28. Seo, M.W., Olson, S.M., Sun, C.G. and Oh, M.H. (2012), "Evaluation of liquefaction potential index along western coast of South Korea using SPT and CPT", Mar. Georesour. Geotech., 30(3), 234-260. https://doi.org/10.1080/1064119X.2011.614322.
  29. Skempton, A.W. (1986), "Standard penetration test procedures and the effects in sands of overburden pressure, relative density, particle size, aging and overconsolidation", Geotechnique, 36(3), 425-447. https://doi.org/10.1680/geot.1986.36.3.425.
  30. Sun, C.G. (2015), "Determination of mean shear wave velocity to 30 m depth for site classification using shallow depth shear wave velocity profile in Korea", Soil Dyn. Earthq. Eng., 73, 17-28. https://doi.org/10.1016/j.soildyn.2015.02.011.
  31. Sun, C.G., Cho, C.S., Son, M. and Shin, J.S. (2013), "Correlations between shear wave velocity and in-situ penetration test results for Korean soil deposits", Pure Appl. Geophys., 170(3), 271-281. https://doi.org/10.1007/s00024-012-0516-2.
  32. Sun, C.G., Kim, B.H., Park, K.H. and Chung, C.K. (2015), "Geotechnical comparison of weathering degree and shear wave velocity in the decomposed granite layer in Hongseong, South Korea", Environ. Earth Sci., 74(9), 6901-6917. https://doi.org/10.1007/s12665-015-4692-0.
  33. Sun, C.G., Kim, D.S. and Chung, C.K. (2005), "Geologic site conditions and site coefficients for estimating earthquake ground motions in the inland areas of Korea", Eng. Geol., 81(4), 446-469. https://doi.org/10.1016/j.enggeo.2005.08.002.
  34. Yoon, S., Lee, S.R., Kim, Y.T. and Go, G.H. (2015), "Estimation of saturated hydraulic conductivity of Korean weathered granite soils using a regression analysis", Geomech. Eng., 23(3), 245-259. https://doi.org/10.12989/gae.2020.23.3.245.
  35. Zaid, M., Sadique, M.R., Alam, M.M. and Samanta, M. (2020), "Effect of shear zone on dynamic behaviour of rock tunnel constructed in highly weathered granite", Geomech. Eng., 9(1), 101-113. https://doi.org/10.12989/gae.2015.9.1.101.
  36. Zhang, R., Zhang, W. and Goh, A.T.C. (2021), "Assessment of wall deflections and ground settlements for braced excavations subjected to groundwater drawdown: Numerical simulations and design charts", ISSMGE Int. J. Geoeng. Case Histories, 6(2), 67-80. https://dx.doi.org/10.4417/IJGCH-06-02-04.
  37. Zhang, W.G., Zhang, R.H., Han, L. and Goh, A.T.C. (2019), "Engineering properties of the Bukit Timah Granitic residual soil in Singapore", Undergr. Sp., 4(2), 98-108. https://doi.org/10.1016/j.undsp.2018.07.001.