Acknowledgement
This work was supported by the National Research Foundation of Korea(NRF) grant funded by the Korea government(MSIT). (NRF-2022R1A2C1004599).
References
- "KSC 8321", "KSC 8332", "KSC 4621", "KSC 4613", "IEC 60947-2: Low Voltage Switchgear and Control Gear-part2: Circuit Breakers", "IEC 61008-1: Residual Current Operated Circuit-breakers without Integral Overcurrent Protection for Household and Similar Uses (RCCBs) Part 1: General Rules", "IEC 61009-1: Residual Current Operated Circuit-breakers with Integral Overcurrent Protection for Household and Similar Uses (RCBOs) - Part 1: General Rules"
- A. A. Razi-Kazemi, M. Vakilian, K. Niayesh and M. Lehtonen, "Circuit-Breaker Automated Failure Tracking Based on Coil Current Signature", IEEE Transactions on Power Delivery, Vol. 29, No. 1, pp. 283-290, 2014. https://doi.org/10.1109/TPWRD.2013.2276630
- R. B. Thangarajan, S. Chetwani, V. Shrinet, M. Oak and S. Jain, "A Comparison of Thermoset and Thermoplastic Arc Chutes in Molded-case Circuit Breakers under Fault Clearing", IEEE Electrical Insulation Magazine, Vol. 31, No. 2, pp. 30-35, https://doi.org/10.1109/MEI.2015.7048135
- K. H. Lee, "Experimental Evaluation for the Performance of the old MCCB Installed in Apartment Building Power Distribution Board", Journal of the Korean Institute of IIIuminating and Electrical Installation Engineers, Vol. 30, No. 11, pp. 81-86, 2016. https://doi.org/10.5207/JIEIE.2016.30.11.081
- C. M. Kim, M. I. Choi. et al, "A study on the Real Condition and Life Time of the RCD", The Transactions of the Korean Institute of Electrical Engineers, Vol. 59, No. 4, pp. 467-472, 2010.
- IEEE Approved Draft Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications", IEEE, 2017.
- M. Krasich, "How to Estimate and Use MTTF/MTBF Would the Real MTBF Please Stand Up?", 2009 Annual Reliability and Maintainability Symposium, Fort Worth, TX, pp. 353-359, 2009.
- G. D. Gregory and W. M. Hall, "Predicting Molded-case Circuit Breaker Let-through Characteristics in an Electrical System under Short-circuit Conditions", IEEE Industry Applications Society Annual Meeting, Vol. 2, pp. 1754-1764, 1991.
- Y. K. Choi and S. W. Jee, "The Effect of the Magnetic Grids and Arc Runner on the Arc Plasma Column in the Contact System of a Molded Case Circuit Breaker", IEEE Transactions on Plasma Science, Vol. 46, No. 3, pp. 606-610, 2018. https://doi.org/10.1109/TPS.2018.2801389
- R. Rodrigues, U. Raheja, P. Cairoli, L. Raciti and A. Antoniazzi, "Accelerated aging Test of Solid-State DC Circuit Breaker based on 2.5 kV Reverse Blocking IGCT", IEEE Energy Conversion Congress and Exposition, pp. 6024-6029, 2020.
- IEC 62506:2013 Methods for Product Accelerated Testing IEC.
- S. D. Kang and J. H. Kim, "Investigation on the Insulation Resistance Characteristics of Low Voltage Cable", Energies, Vol. 13, No. 14, 3611, 2020.
- S. G. Burnay and J. Dawson, "Reverse Temperature Effect during Radiation Ageing of XLPE Cable Insulation. In: Mallinson LG (eds) Ageing Studies and Lifetime Extension of Materials", Springer, Boston, MA, 2020.
- M. Celina, K. T. Gillen and R. A. Assink, "Accelerated Aging and Lifetime Prediction: Review of non-Arrhenius Behaviour due to Two Competing Processes", Polym Degrad Stab, Vol. 90, No. 3, pp. 395-404, 2005. https://doi.org/10.1016/j.polymdegradstab.2005.05.004
- L. K. H. Van Beek, "Dielectric Behavior of Curing Phenolic-formal Resins", Journal of Applied Polymer Science, Vol. 8, No. 6, pp. 2843-2851, 1964. https://doi.org/10.1002/app.1964.070080629
- J. D. Jeong, J. Y. Lee, S. D. Kang and J. H. Kim, "Analyzing the Reliability for Life Evaluation of Cables according to Accelerated Degradation Test", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 34, No. 11, pp. 16-22, 2020.
- J. H. Kwon, M. H. Park, K. J. Lim and H. Lee, "Investigation on Electrical Characteristics of HDPE Mixed with EVA Applied for Recycleable Power Cable Insulation", 2012 IEEE International Conference on Condition Monitoring and Diagnosis, pp. 1039-1042, 2012.
- E. Linde and U. W. Gedde, "Plasticizer Migration from PVC Cable Insulation-the Challenges of Extrapolation Methods", Polymer Degradatiom and Stability, No. 101, pp. 24-31, 2014.
- D. W. Jung and J. H. Kim, "A Study on the Operating Characteristics of Molded Case Circuit Breakers according to Temperature Rise", J. Korean Soc. Saf., Vol. 30, No. 5, pp. 8-13, 2015. https://doi.org/10.14346/JKOSOS.2015.30.5.8