과제정보
The first author acknowledges the Ministry of Education, Government of India, for Prime Minister's Research Fellowship grant.
참고문헌
- Abe, K., Nakamura, S., Nakamura, H. and Shiomi, K. (2017), "Numerical study on dynamic behavior of slope models including weak layers from deformation to failure using material point method", Soils Found., 57(2), 155-175. https://doi.org/10.1016/j.sandf.2017.03.001.
- Bishop, A.W. (1955), "The use of the slip circle in the stability analysis of slopes", Geotechnique, 5(1), 7-17. https://doi.org/10.1680/geot.1955.5.1.7.
- Cheng, Y.M. and Au, S.K. (2005), "Solution of the bearing capacity problem by the slip line method", Can. Geotech. J., 42(4), 1232-1241. https://doi.org/10.1139/t05-037.
- Cheng, Y.M., Li, L. and Chi, S.C. (2007), "Performance studies on six heuristic global optimization methods in the location of critical slip surface", Comput. Geotech., 34(6), 462-484. https://doi.org/10.1016/j.compgeo.2007.01.004.
- Choudhury, D., Basu, S. and Bray, J.D. (2007), "Behaviour of slopes under static and seismic conditions by limit equilibrium method", Proceedings of Geo-Denver 2007: New Peaks in Geotechnics, Denver, Colorado, February.
- Cui, H., Ji, J., Song, J. and Huang, W. (2022), "Limit state linebased seismic stability charts for homogeneous earth slopes", Comput. Geotech., 146, 104749. https://doi.org/10.1016/j.compgeo.2022.104749.
- Erzin, Y. and Cetin, T. (2014), "The prediction of the critical factor of safety of homogeneous finite slopes subjected to earthquake forces using neural networks and multiple regressions", Geomech. Eng., 6(1), 1-15. https://doi.org/10.12989/gae.2014.6.1.001.
- Eurocode 8 (2004), Design of structures for earthquake resistance. Part 5: Foundations, retaining structures and geotechnical aspects, European Committee for Standardization; Brussels, Belgium.
- Fellenius, W. (1936), "Calculation of the stability of earth dams", Proceedings of Transactions of the 2nd Congress on Large Dams, International Commission on Large Dams of the World Power Conference, Washington, DC, December.
- Florkiewicz, A. and Kubzdela, A. (2013), "Factor of safety in limit analysis of slopes", Geomech. Eng., 5(5), 485-497. https://doi.org/10.12989/gae.2013.5.5.485.
- Ghanbari, A., Khalilpasha, A., Sabermahani, M. and Heydari, B. (2013), "An analytical technique for estimation of seismic displacements in reinforced slopes based on horizontal slices method (HSM)", Geomech. Eng., 5(2), 143-164. https://doi.org/10.12989/gae.2013.5.2.143.
- Graham, J. (1968), "Plane plastic failure in cohesionless soils", Geotechnique, 18(3), 301-316. https://doi.org/10.1680/geot.1968.18.3.301.
- Gray, D.H. (2013), "Influence of slope morphology on the stability of earthen slopes", Proceedings of the Geo-Congress 2013: Stability and Performance of Slopes and Embankments, San Diego, California, March.
- Greco, V.R. (2008), "Discussion of seismic active earth pressure behind a nonvertical retaining wall using pseudo-dynamic analysis", Can. Geotech. J., 45(12), 1795-1797. https://doi.org/10.1139/T08-099.
- Griffiths, D.V. and Lane, P.A. (1999), "Slope stability analysis by finite elements", Geotechnique, 49(3), 387-403. https://doi.org/10.1680/geot.1999.49.3.387.
- Hill, R. (1950), The Mathematical Theory of Plasticity, Oxford University Press, Oxford, UK.
- Huang, C.C. (2019), "Experimental verification of seismic bearing capacity of near-slope footings using shaking table tests", J. Earthq. Eng., https://doi.org/10.1080/13632469.2019.1665148.
- IS 1893 (2016), Criteria for earthquake resistant design of structures. Part 1: General provisions and buildings, Bureau of Indian Standards; New Delhi, India.
- Jeldes, I.A., Drumm, E.C. and Yoder, D.C. (2015), "Design of stable concave slopes for reduced sediment delivery", J Geotech. Geoenviron. Eng., 141(2), 04014093-1-10. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001211.
- Keshavarz, A. and Kumar, J. (2017), "Bearing capacity computation for a ring foundation using the stress characteristics method", Comput. Geotech., 89, 33-42. https://doi.org/10.1016/j.compgeo.2017.04.006.
- Khosravi, M., Leshchinsky, D., Meehan, C.L. and Khosravi, A. (2013), "Stability analysis of seismically loaded slopes using finite element techniques", Proceedings of the Geo-Congress 2013: Stability and Performance of Slopes and Embankments, San Diego, California, March.
- Kolathayar, S. and Ghosh, P. (2009), "Seismic active earth pressure on walls with bilinear backface using pseudo-dynamic approach", Comput. Geotech., 36(7), 1229-1236. https://doi.org/10.1016/j.compgeo.2009.05.015.
- Krabbenhoft, K., Lyamin, A. and Krabbenhoft, J. (2015), Optum Computational Engineering (OptumG2). https://optumce.com
- Kumar, J. and Ghosh, P. (2007), "Ultimate bearing capacity of two interfering rough strip footings", Int. J. Geomech., 7(1), 53-62. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:1(53).
- Lee, M.G., Ha, J.G., Jo, S.B., Park, H.J. and Kim, D.S. (2017), "Assessment of horizontal seismic coefficient for gravity quay walls by centrifuge tests", Geotechnique Lett., 7(2), 211-217. https://doi.org/10.1680/jgele.17.00005.
- Leshchinsky, D., Ebrahimi, S., Vahedifard, F. and Zhu, F. (2012), "Extension of Mononobe-Okabe approach to unstable slopes", Soils Found., 52(2), 239-256. https://doi.org/10.1016/j.sandf.2012.02.004.
- Li, C., Jiang, P. and Zhou, A. (2019), "Rigorous solution of slope stability under seismic action", Comput. Geotech., 109, 99-107. https://doi.org/10.1016/j.compgeo.2019.01.018.
- Li, S., Shangguan, Z., Duan, H., Liu, Y. and Luan, M. (2009), "Searching for critical failure surface in slope stability analysis by using hybrid genetic algorithm", Geomech. Eng., 1(1), 85-96. https://doi.org/10.12989/gae.2009.1.1.085.
- Li, X. (2007), "Finite element analysis of slope stability using a nonlinear failure criterion", Comput. Geotech., 34(3), 127-136. https://doi.org/10.1016/j.compgeo.2006.11.005.
- Lu, L., Wang, Z., Huang, X., Zheng, B. and Arai, K. (2014), "Dynamic and static combination analysis method of slope stability analysis during earthquake", Math. Probl. Eng., Article ID 573962. https://doi.org/10.1155/2014/573962.
- Majumdar, D.K. (1971), "Stability of soil slopes under horizontal earthquake force", Geotechnique, 21(1), 84-88. https://doi.org/10.1680/geot.1971.21.1.84.
- Makdisi, F.I. and Seed, H.B. (1978), "Simplified procedure for estimating dam and embankment earthquake-induced deformations", J. Geotech. Eng. Div., 104(7), 849-867. https://doi.org/10.1061/AJGEB6.0000668.
- Mononobe, N. and Matsuo, H. (1929), "On the determination of earth pressures during earthquakes", Proceedings of the World Engineering Conference, Tokyo.
- Nandi, S., Santhoshkumar, G. and Ghosh, P. (2021a), "Determination of critical slope face in c-ϕ soil under seismic condition using method of stress characteristics", Int. J. Geomech., 21(4), 04021031-1-13. https://https://doi.org/10.1061/(ASCE)GM.1943-5622.0001976.
- Nandi, S., Santhoshkumar, G. and Ghosh, P. (2021b), "Development of limiting soil slope profile under seismic condition using slip line theory", Acta Geotechnica, 16(11), 3517-3531. https://doi.org/10.1007/s11440-021-01251-4.
- Nasiri, F., Javdanian, H. and Heidari, A. (2020), "Seismic response analysis of embankment dams under decomposed earthquakes", Geomech. Eng., 21(1), 35-51. https://doi.org/10.12989/gae.2020.21.1.035.
- Newmark, N.M. (1965), "Effects of earthquakes on dams and embankments", Geotechnique, 15(2), 139-160. https://doi.org/10.1680/geot.1965.15.2.139.
- Okabe, S. (1926), "General theory of earth pressures", J. Japan Soc. Civ. Eng., 12, 1277-1323.
- Peng, M.X. and Chen, J. (2013), "Slip-line solution to active earth pressure on retaining walls", Geotechnique, 63(12), 1008-1019. https://doi.org/10.1680/geot.11.P.135.
- Prisco, C.di., Pastor, M. and Pisano, F. (2012), "Shear wave propagation along infinite slopes: a theoretically based numerical study", Int. J. Numer. Anal. Meth. Geomech., 36(5), 619-642. https://doi.org/10.1002/nag.1020.
- Qian. Z.H. and Zou, J.F. (2022), "Three-dimensional rigorous upper-bound limit analysis of soil slopes subjected to variable seismic excitations", Comput. Geotech., 147, 104714. https://doi.org/10.1016/j.compgeo.2022.104714.
- Qin, C.-B. and Chian, S.C. (2018), "Kinematic analysis of seismic slope stability with a discretisation technique and pseudodynamic approach: a new perspective", Geotechnique, 68(6), 492-503. https://doi.org/10.1680/jgeot.16.P.200.
- Rieke-Zapp, D.H. and Nearing, M.A. (2005), "Slope shape effects on erosion: a laboratory study", Soil Sci. Soc. Am. J., 69(5), 1463-1471. https://doi.org/10.2136/sssaj2005.0015.
- Sahoo, P.P. and Shukla, S.K. (2019), "Taylor's slope stability chart for combined effects of horizontal and vertical seismic coefficients", Geotechnique, 69(4), 344-354. https://doi.org/10.1680/jgeot.17.P.222.
- Sarkar, S. and Chakraborty, M. (2019), "Pseudostatic slope stability analysis in two-layered soil by using variational method", Proceedings of the 7th International Conference on Earthquake Geotechnical Engineering, Rome, Italy, June.
- Sarma, S.K. (1973), "Stability analysis of embankments and slopes", Geotechnique, 23(3), 423-433. https://doi.org/10.1680/geot.1973.23.3.423.
- Schor, H.J. and Gray, D.H. (2007), Landforming: An Environmental Approach to Hillside Development, Mine Reclamation and Watershed Restoration, Wiley, Hoboken, NJ.
- Sokolovski, V.V. (1960), Statics of Soil Media, Butterworths Scientific Publications, London, UK.
- Su, Z. and Shao, L. (2021), "A three-dimensional slope stability analysis method based on finite element method stress analysis", Eng. Geol., 280(105910), 1-12. https://doi.org/10.1016/j.enggeo.2020.105910.
- Taylor, D.W. (1937), "Stability of earth slopes", J. Boston Soc. Civil Engineers, 24, 197-246.
- Terzaghi, K. (1950), Mechanisms of Landslides, Geological Society of America, Berkeley Volume.
- Terzi, N.U. and Selcuk, M.E. (2015), "Nonlinear dynamic behavior of Pamukcay earthfill dam", Geomech. Eng., 9(1), 83-100. https://doi.org/10.12989/gae.2015.9.1.083.
- Utili, S. and Nova, R. (2007), "On the optimal profile of a slope", Soils Found., 47(4), 717-729. https://doi.org/10.3208/sandf.47.717.
- Vahedifard, F., Shahrokhabadi, S. and Leshchinsky, D. (2016), "Optimal profile for concave slopes under static and seismic conditions", Can. Geotech. J., 53(9), 1522-1532. https://doi.org/10.1139/cgj-2016-0057.
- Veiskarami, M., Eslami, A. and Kumar, J. (2011), "End-bearing capacity of driven piles in sand using the stress characteristics method: analysis and implementation", Can. Geotech. J., 48(10), 1570-1586. https://doi.org/10.1139/t11-057.
- Wasowski, J., Keefer, D.K. and Lee, C.T. (2011), "Toward the next generation of research on earthquake-induced landslides: current issues and future challenges", Eng. Geol., 122(1-2), 1-8. https://doi.org/10.1016/j.enggeo.2011.06.001.
- Yang, X., Zhai, E., Wang, Y. and Hu, Z. (2018), "A comparative study of pseudo-static slope stability analysis using different design codes", Water Sci. Eng., 11(4), 310-317. https://doi.org/10.1016/j.wse.2018.12.003.
- Yuan, R., Deng, Q., Cunningham, D., Han, Z., Zhang, D. and Zhang, B. (2016), "Newmark displacement model for landslides induced by the 2013 Ms 7.0 Lushan earthquake, China", Front. Earth Sci., 10(4), 740-750. https://doi.org/10.1007/s11707-015-0547-y.
- Zhou, X.P. and Cheng, H, (2014), "Stability analysis of threedimensional seismic landslides using the rigorous limit equilibrium method", Eng. Geol., 174, 87-102. https://doi.org/10.1016/j.enggeo.2014.03.009.