과제정보
이 연구는 금오공과대학교 학술연구비로 지원되었음(202102210001).
참고문헌
- W. Gwozdz, K. Steensen Nielsen, and T. Muller, "An Environmental Perspective on Clothing Consumption: Consumer Segments and Their Behavioral Patterns", Sustainability, 2017, 9, 762. https://doi.org/10.3390/su9050762
- Q. Liu, J. Huang, J. Zhang, Y. Hong, Y. Wan, Q. Wang, M. Gong, Z. Wu, and C. F. Guo, "Thermal, Waterproof, Breathable, and Antibacterial Cloth with a Nanoporous Structure", ACS Appl. Mater. Interfaces, 2018, 10, 2026-2032. https://doi.org/10.1021/acsami.7b16422
- C. O'Brien, L. A. Blanchard, B. S. Cadarette, T. L. Endrusick, X. Xu, L. G. Berglund, M. N. Sawka, and R. W. Hoyt, "Methods of Evaluating Protective Clothing Relative to Heat and Cold Stress: Thermal Manikin, Biomedical Modeling, and Human Testing", J. Occup. Environ. Hyg., 2011, 8, 588-599. https://doi.org/10.1080/15459624.2011.613291
- C. A. Wilson, R. M. Laing, and T. Tamura, "Intrinsic "Dry" Thermal Resistance of Dry Infant Bedding During Use: Part 2: Estimated vs Measured", Int. J. Cloth. Sci. Technol., 2004, 16, 310-323. https://doi.org/10.1108/09556220410527237
- H. O. Nilsson, "Comfort Climate Evaluation with Thermal Manikin Methods and Computer Simulation Models", Byggvetenskap, 2004, p.202.
- R. B. Farrington, J. P. Rugh, D. Bharathan, and R. Burke, "Use of a Thermal Manikin to Evaluate Human Thermoregulatory Responses in Transient, Non-uniform, Thermal Environments", SAE Transactions, 2004, 113, 548-556.
- S. Tanabe, E. A. Arens, F. Bauman, H. Zhang, and F. L. Madsen, "Evaluating Thermal Environments by Using a Thermal Manikin with Controlled Skin Surface Temperature", ASHRAE Transactions, 1994, 100, 39-48.
- Z. Ostrowski, M. Rojczyk, I. Szczygiel, J. Laszczyk, and A. J. Nowak, "Dry Heat Loses of Newborn Baby in Infant Care Bed: Use of a Thermal Manikin", J. Physics: Conference Series, 2016, 745, 032087. https://doi.org/10.1088/1742-6596/745/3/032087
- A. C. Brown and D. de Beer, "Development of a Stereolithography (STL) Slicing and G-code Generation Algorithm for an Entry Level 3-D Printer", 2013 Africon, 2013, 1-5.
- C. Koch, L. Van Hulle, and N. Rudolph, "Investigation of Mechanical Anisotropy of the Fused Filament Fabrication Process via Customized Tool Path Generation", Additive Manufacturing, 2017, 16, 138-145. https://doi.org/10.1016/j.addma.2017.06.003
- N. Ganganath, C. T. Cheng, and K. Y. Fok, "Trajectory Planning for 3D Printing: A Revisit to Traveling Salesman Problem", 2nd International Conference on Control, Automation and Robotics (ICCAR), IEEE, 2016.
- L. Feijs, T. Nachtigall, and O. Tomico, "Sole Maker: Towards Ultra-personalised Shoe Design Using Voronoi Diagrams and 3D Printing", Proceedings of the Fabrication and Sculpting Event, 2016, pp.31-40.
- C. Morales and P. Adasme, "Modeling a Simple Traveler Salesman Problem for Improving Energy Efficiency in Robots that Execute Computer Numerical Control Machining", CHILEAN Conference on Electrical, Electronics Engineering, Information and Communication Technologies (CHILECON), IEEE, 2017.
- R. M. Aciu and H. Ciocarlie, "G-code Optimization Algorithm and Its Application on Printed Circuit Board Drilling", IEEE 9th IEEE International Symposium on Applied Computational Intelligence and Informatics (SACI), IEEE, 2014.
- N. Haghbin, D. Bone, and K. Young, "Controlled Extrusionbased 3D Printing of Micro-channels with the Geometric Modelling of Deposited Roads", J. Manuf. Proc., 2021, 67, 406-417. https://doi.org/10.1016/j.jmapro.2021.04.067
- M. S. Alsoufi, M. W. Alhazmi, D. K. Suker, W. K. Hafiz, S. S. Almalki, and R. O. Malibari, "Influence of Multi-Level Printing Process Parameters on 3D Printed Parts in Fused Deposition Molding of Poly(lactic) Acid Plus: A Comprehensive Investigation", Am. J. Mech. Eng., 2019, 7, 87-106. https://doi.org/10.12691/ajme-7-2-5
- E. Karasik, R. Fattal, and M. Werman, "Object Partitioning for Support-Free 3D-Printing", Computer Graphics Forum", 2019, 38, 305-316. https://doi.org/10.1111/cgf.13639
- L. Luo, I. Baran, S. Rusinkiewicz, and W. Matusik, "Chopper: Partitioning Models into 3D-printable Parts", ACM Transactions on Graphics (TOG), 2012, 31, 1-9.
- J. Y. Jung, S. Chee, and I. H. Sul, "Automatic Segmentation and 3D Printing of A-shaped Manikins using a Bounding Box and Body-feature Points", Fashion and Textiles, 2021, 8, 1-21. https://doi.org/10.1186/s40691-020-00228-3
- D. H. You and G. B. Park, "A Study on the Improvement for Printing Quality of 3D Printer", The Korean Institute of Electrical Engineers, 2019, 68, 1652-1661. https://doi.org/10.5370/KIEE.2019.68.12.1652
- G. Percoco, L. Arleo, G. Stano, and F. Bottiglione, "Analytical Model to Predict the Extrusion Force as a Function of the Layer Height, in Extrusion Based 3D Printing", Additive Manufacturing, 2021, 38, 101791. https://doi.org/10.1016/j.addma.2020.101791
- J. Vanek, J. A. G. Galicia, and B. Benes, "Clever Support: Efficient Support Structure Generation for Digital Fabrication", Computer Graphics Forum, 2014, 33, 117-125. https://doi.org/10.1111/cgf.12437
- KS K ISO 4920, "Textile Fabrics-Determination of Resistance to Surface Wetting (Spray Test)", Korea Agency for Technology and Standards, 2014.
- ISO 9865, "Textiles-Determination of Water Repellency of Fabrics by the Bundesmann Rain-Shower Test", 1991.
- KS K ISO 811, "Testing Method for Water Resistance of Cloth: Low Range Hydrostatic Pressure Method", Korea Agency for Technology and Standards, 2015.
- KS K 0592, "The Method for Water Resistance of Coated Cloth: High Range, Hydrostatic Pressure Method", Korean Agency for Technology and Standards, 2011.
- KS M 8096, "Rubber-or Plastics-coated Fabrics for Water-resistant Clothing-Specification", KS M ISO, 2009.
- KS V ISO 15027-1, "Immersion Suits-Part 1: Constant Wear Suits, Requirements Including Safety", KS V ISO, 2005.
- Y. H. Choi, C. M. Kim, H. S. Jeong, and J. H. Youn, "Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-engineering Plastic", World J. Engi. Technol., 2016, 4, 186-192. https://doi.org/10.4236/wjet.2016.43D022
- M. N. Hafsa, M. Ibrahim, M. Wahab, and M. S. Zahid, "Evaluation of FDM Pattern with ABS and PLA Material", Appl. Mech. Mater., 2014, 465-466, 55-59. https://doi.org/10.4028/www.scientific.net/AMM.465-466.55
- M. Brooks, "3D Printing Pillowing Problems", https://m3dzone.com/3d-printing-pillowing/ (Accessed July 20, 2021).
- C. P. Buckley, C. Prisacariu, and C. Martin, "Elasticity and Inelasticity of Thermoplastic Polyurethane Elastomers: Sensitivity to Chemical and Physical Structure", Polymer, 2010, 51, 3213-3224. https://doi.org/10.1016/j.polymer.2010.04.069
- C. Guo, M. Zhang, and B. Bhandari, "Model Building and Slicing in Food 3D Printing Processes: a Review", Comprehensive Reviews in Food Science and Food Safety, 2019, 18, 1052-1069. https://doi.org/10.1111/1541-4337.12443
- S. Khalil and W. Sun, "Biopolymer Deposition for Freeform Fabrication of Hydrogel Tissue Constructs", Mater. Sci. Eng.: C, 2007, 27, 469-478. https://doi.org/10.1016/j.msec.2006.05.023