DOI QR코드

DOI QR Code

Microstructure and properties of 316L stainless steel foils for pressure sensor of pressurized water reactor

  • He, Qubo (College of Materials Science and Engineering, Chongqing University) ;
  • Pan, Fusheng (College of Materials Science and Engineering, Chongqing University) ;
  • Wang, Dongzhe (Chongqing Materials Research Institute Co., Ltd) ;
  • Liu, Haiding (National Engineering Research Center for Instrument Functional Materials) ;
  • Guo, Fei (College of Materials Science and Engineering, Chongqing University of Technology) ;
  • Wang, Zhongwei (College of Materials Science and Engineering, Chongqing University of Technology) ;
  • Ma, Yanlong (College of Materials Science and Engineering, Chongqing University of Technology)
  • Received : 2020.02.27
  • Accepted : 2020.06.05
  • Published : 2021.01.25

Abstract

The microstructure and texture of three 316L foils of 25 ㎛ thickness, which were subjected to different manufacturing process, were systematically characterized using advance analytical techniques. Then, the electrochemical property of the 316L foils in simulated pressurized water reactor (PWR) solution was analyzed using potentiodynamic polarization. The results showed that final rolling strain and annealing temperature had evident effect on grain size, fraction of recrystallization, grain boundary type and texture distribution. It was suggested that large final rolling strain could transfer Brass texture to Copper texture; low annealing temperature could limit the formation of preferable orientations in the rolling process to reduce anisotropy. Potentiodynamic polarization test showed that all samples exhibited good corrosion performance in the simulated primary PWR solution.

Keywords

Acknowledgement

The authors would like to acknowledge the National Science and Technology Major Project of China (Grant No. 2017ZX06004004) and the Science and Technology Major Project of China National Machinery Industry Corporation Ltd. (Grant No. SINOMAST-ZDZX-2019-03) for providing financial support to this work.

References

  1. M. Elbaradei, The status and future of nuclear power: a brief overview, Trans. Roy. Soc. S. Afr. 56 (2010) 72-73. https://doi.org/10.1080/00359190109520503
  2. Qiang Wang, Rongrong Li, Gang He, Research status of nuclear power, A review,Renewable and Sustainable Energy Reviews 90 (2018) 90-96. https://doi.org/10.1016/j.rser.2018.03.044
  3. Xiaopeng Guo, Xiaodan Guo, Nuclear power development in China after the restart of new nuclear construction and approval: a system dynamics analysis, Renew. Sustain. Energy Rev. 57 (2016) 999-1007. https://doi.org/10.1016/j.rser.2015.12.190
  4. E. Salama, M.M. Eissa, A.S. Tageldin, Distinct properties of tungsten austenitic stainless alloy as a potential nuclear engineering material, Nuclear Engineering and Technology 51 (2019) 784-791. https://doi.org/10.1016/j.net.2018.12.021
  5. Subhasish Mohanty, K. William, Soppet, Saurindranath Majumdar, Krishnamurti Natesan, In-air and pressurized water reactor environment fatigue experiments of 316 stainless steel to study the effect of environment on cyclic hardening, J. Nucl. Mater. 473 (2016) 290-299. https://doi.org/10.1016/j.jnucmat.2016.01.034
  6. Guangdong Han, Zhanpeng Lu, Xiangkun Ru, Junjie Chen, Qian Xiao, Yongwu Tian, Improving the oxidation resistance of 316L stainless steel in simulated pressurized water reactor primary water by electropolishing treatment, J. Nucl. Mater. 467 (2015) 194-204. https://doi.org/10.1016/j.jnucmat.2015.09.029
  7. Bunyamin Aygun, High alloyed new stainless steel shielding material for gamma and fast neutron radiation, Nucl. Eng. Technol. 52 (2020) 647-653. https://doi.org/10.1016/j.net.2019.08.017
  8. Zhong Yuan, Lars-Erik Rannar, Leifeng Liu, Andrey Koptyug, Stefan Wikman, Jon Olsen, Daqing Cui, Zhijian Shen, Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications, J. Nucl. Mater. 486 (2017) 234-245. https://doi.org/10.1016/j.jnucmat.2016.12.042
  9. C.M. Barr, P.J. Felfer, J.I. Cole, M.L. Taheri, Observation of oscillatory radiation induced segregation profiles at grain boundaries in neutron irradiated 316 stainless steel using atom probe tomography, J. Nucl. Mater. (2018), https://doi.org/10.1016/j.jnucmat.2018.01.053.
  10. T. Liu, S. Xia, Q. Bai, B. Zhou, Y. Lu, T. Shoji, Three-dimensional study of grain boundary engineering effects on intergranular stress corrosion cracking of 316 stainless steel in high temperature water, J. Nucl. Mater. (2017), https://doi.org/10.1016/j.jnucmat.2017.10.004.
  11. T.J.A. Slater, R.S. Bradley, G. Bertali, R. Geurts, S.M. Northover, M.G. Burke, S.J. Haigh, T.L. Burnett, P.J. Withers, Multiscale correlative tomography: an investigation of creep cavitation in 316 stainless steel, Sci. Rep. (2017), https://doi.org/10.1038/s41598-017-06976-5.
  12. J. Chen, A. Nurrochman, J.-D. Hong, T.S. Kim, C. Jang, Y. Yi, Comparison of oxide layers formed on the low-cycle fatigue crack surfaces of Alloy 690 and 316 SS tested in a simulated PWR environment, Nuclear Engineering and Technology 51 (2019) 479-489, https://doi.org/10.1016/j.net.2018.10.007.
  13. T. Allen, J. Busby, M. Meyer, D. Petti, Materials challenges for nuclear systems, Mater. Today 13 (2010) 14-23, https://doi.org/10.1016/S1369-7021(10)70220-0.
  14. A. Ghosh, H.-G. Brokmeier, N.P. Gurao, Orientation-dependent deformation micro-mechanism and failure analysis of SS 316 under tensile and cyclic load, Int. J. Fatig. 125 (2019) 35-46, https://doi.org/10.1016/j.ijfatigue.2019.03.035.
  15. A.N. Moura, L.N.O. Favarato, A. Itman Filho, C.M. Alcantara, M.A. Cunha, T.R. Oliveira, M.L.P. Machado, Study of the recrystallization and crystallographic texture evolution during final annealing of UNS S32304 Lean Duplex stainless steel, Mater. Char. 130 (2017) 39-49, https://doi.org/10.1016/j.matchar.2017.05.025.
  16. J. Gao, J. Tan, X. Wu, S. Xia, Effect of grain boundary engineering on corrosion fatigue behavior of 316LN stainless steel in borated and lithiated high-temperature water, Corrosion Sci. 152 (2019) 190-201, https://doi.org/10.1016/j.corsci.2019.01.036.
  17. T.J. Marrow, L. Babout, A.P. Jivkov, P. Wood, D. Engelberg, N. Stevens, P.J. Withers, R.C. Newman, Three dimensional observations and modelling of intergranular stress corrosion cracking in austenitic stainless steel, J. Nucl. Mater. 352 (2006) 62-74, https://doi.org/10.1016/j.jnucmat.2006.02.042.
  18. K. Pawlik, Determination of the orientation distribution function from pole figures in arbitrarily defined cells, Phys. Status Solidi 134 (1986) 477-483, https://doi.org/10.1002/pssb.2221340205.
  19. S. Chattopadhyay, G. Anand, S.G. Chowdhury, I. Manna, Effect of reverse austenitic transformation on mechanical property and associated texture evolution in AISI 316 austenitic stainless steel processed by low temperature rolling and annealing, Mater. Sci. Eng. 734 (2018) 139-148, https://doi.org/10.1016/j.msea.2018.07.087.
  20. A.T. Krawczynska, P. Suchecki, B. Adamczyk-Cieslak, B. Romelczyk-Baishya, M. Lewandowska, Influence of high hydrostatic pressure annealing on the recrystallization of nanostructured austenitic stainless steel, Mater. Sci. Eng. 767 (2019) 138381, https://doi.org/10.1016/j.msea.2019.138381.
  21. A. Shahryari, J.A. Szpunar, S. Omanovic, The influence of crystallographic orientation distribution on 316LVM stainless steel pitting behavior, Corrosion Sci. 51 (2009) 677-682, https://doi.org/10.1016/j.corsci.2008.12.019.

Cited by

  1. Effect of heat treatments on 316 stainless steel parts fabricated by wire and arc additive manufacturing : Microstructure and synchrotron X-ray diffraction analysis vol.48, pp.no.pb, 2021, https://doi.org/10.1016/j.addma.2021.102428
  2. Effect of heat input and post-weld heat treatment on surface, texture, microstructure, and mechanical properties of dissimilar laser beam welded AISI 2507 super duplex to AISI 904L super austenitic st vol.73, 2021, https://doi.org/10.1016/j.jmapro.2021.11.040