DOI QR코드

DOI QR Code

A multi-hazard-based design approach for LRB isolation system against explosion and earthquake

  • Dadkhah, Hamed (Department of Civil Engineering, Faculty of Engineering, University of Mohaghegh Ardabili) ;
  • Mohebbi, Mohtasham (Department of Civil Engineering, Faculty of Engineering, University of Mohaghegh Ardabili)
  • 투고 : 2021.05.03
  • 심사 : 2021.05.31
  • 발행 : 2021.07.25

초록

Base isolation system is originally known as one of the most efficient earthquake-resistance control systems. Isolated strategic structures may also experience terrorist attacks during their lifetime. In this paper, a design method is proposed for lead rubber bearing (LRB) isolation system under multi-hazard of explosion and seismic. This method is based on transforming the design problem into an optimization problem. The seismic response of structure has been defined as objective function while the constraints have been applied on its blast response. To validate the effectiveness of the proposed design method, LRB is designed for controlling a four-story steel moment-resisting building. For comparison objectives, this control system has been also designed under seismic hazard without paying attention to its blast performance. The results show that the earthquake-based optimally designed LRB has effective performance under seismic hazard whereas its blast performance is not as good as its seismic performance. Therefore, this control system cannot be considered as a well-designed control system for multi-hazard. The multi-hazard-based optimally designed LRB shows excellent performance under both blast and seismic loadings, so the proposed design method can be introduced as an effective design approach for LRB under multi-hazard of explosion and seismic.

키워드

참고문헌

  1. ASCE 7-10 (2010), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Reston VA.
  2. Asher, J.W., Hoskere, S.N., Ewing, R.D., Mayes, R.L., Button, M. R. and Van Volkinburg, D.R. (1997), "Performance of seismically isolated structures in the 1994 Northridge and 1995 Kobe earthquakes", Build. Last, 1128-1132.
  3. Baker, W.E. (1973), Explosions in Air, University of Texas press, Austin TX.
  4. Baratta, A. and Corbi, I. (2004), "Optimal design of base-isolators in multi-storey buildings", Comput. Struct., 82(23-26), 2199-2209. https://doi.org/10.1016/j.compstruc.2004.03.061.
  5. Brode, H.L. (1955), "Numerical solutions of spherical blast waves", J. Appl. Phys., 26(6), 766-775. https://doi.org/10.1063/1.1722085.
  6. BUCKLE, I.G. (1993), "Stability of elastomeric seismic isolation systems", Proc. of Seminar on Seismic Isolation, Passive Energy Dissipation and Control, 1993,
  7. Bulson, P.S. (2002), Explosive Loading of Engineering Structures, CRC Press, London.
  8. Cao, L., Laflamme, S., Taylor, D. and Ricles, J. (2016), "Simulations of a variable friction device for multihazard mitigation", J. Struct. Eng., 142(12), H4016001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001580.
  9. Chen, W. and Hao, H. (2013), "Numerical study of blast-resistant sandwich panels with rotational friction dampers", Int. J. Struct. Stab. Dyn., 13(06), 1350014. https://doi.org/10.1142/S0219455413500144.
  10. Choun, Y.S., Park, J. and Choi, I.K. (2014), "Effects of mechanical property variability in lead rubber bearings on the response of seismic isolation system for different ground motions", Nucl. Eng. Technol., 46(5), 605-618. https://doi.org/10.5516/NET.09.2014.718.
  11. Clemente, P., Bongiovanni, G., Buffarini, G., Saitta, F., Castellano, M.G. and Scafati, F. (2019), "Effectiveness of HDRB isolation systems under low energy earthquakes", Soil Dyn. Earthq. Eng., 118, 207-220. https://doi.org/10.1016/j.soildyn.2018.12.018.
  12. Coffield, A. and Adeli, H. (2014), "An investigation of the effectiveness of the framing systems in steel structures subjected to blast loading", J. Civ. Eng. Manag., 20(6), 767-777. https://doi.org/10.3846/13923730.2014.986667.
  13. Coffield, A. and Adeli, H. (2016), "Irregular steel building structures subjected to blast loading", J. Civ. Eng. Manag., 22(1), 17-25. https://doi.org/10.3846/13923730.2015.1073172.
  14. Constantinou, M., Whittaker, A., Fenz, D. and Apostolakis, G. (2007), Seismic Isolation of Bridges, University at Buffalo, New York.
  15. Constantinou, M.C., Whittaker, A., Kalpakidis, Y., Fenz, D. and Warn, G.P. (2006), Performance of Seismic Isolation Hardware under Service and Seismic Loading, University at Buffalo, New York.
  16. Dadkhah, H. and Mohebbi, M. (2019), "Performance assessment of an earthquake-based optimally designed fluid viscous damper under blast loading", Advan. Struct. Eng., 22(14), 3011-3025. https://doi.org/10.1177%2F1369433219855905. https://doi.org/10.1177%2F1369433219855905
  17. Derham, C. (1980), "The design of seismic isolation bearings", Century 2-Emerging Technology Conferences, San Francisco,
  18. De Luca, A. and Guidi, L.G. (2020), "Base isolation issues in Italy: Integrated architectural and structural designs", Soil Dyn. Earthq. Eng., 130, 105912. https://doi.org/10.1016/j.soildyn.2019.105912.
  19. El-Arab, I.M.E. (2016), "Strengthening of existing security buildings against vehicle bomb using fluid viscous dampers, in Egypt", J. Civ. Eng. Constr. Technol., 7(5), 37-47. https://doi.org/10.5897/JCECT2016.0413.
  20. Elkady, A. and Lignos, D.G. (2015), "Effect of gravity framing on the overstrength and collapse capacity of steel frame buildings with perimeter special moment frames", Earthq. Eng. Struct. Dyn., 44(8), 1289-1307. https://doi.org/10.1002/eqe.2519.
  21. Erdik, M., U lker, O ., Sadan, B. and Tuzun, C. (2018), "Seismic isolation code developments and significant applications in Turkey", Soil Dyn. Earthq. Eng., 115, 413-437. https://doi.org/10.1016/j.soildyn.2018.09.009.
  22. EN 15129 (2009), Anti-Seismic Devices, Comite Europeen de Normalisation, Brussels.
  23. FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, American Society of Civil Engineers, Washington DC.
  24. FEMA P695 (2009), Quantification of Building Seismic Performance Factors, American Society of Civil Engineers, Washington DC.
  25. Gent, A. (1990), "Cavitation in rubber: a cautionary tale", Rubber Chemistry Technol., 63(3), 49-53. https://doi.org/10.5254/1.3538266.
  26. Gent, A.N. (1964), "Elastic stability of rubber compression springs", J. Mech. Eng. Sci., 6(4), 318-326. https://doi.org/10.1243%2FJMES_JOUR_1964_006_046_02. https://doi.org/10.1243%2FJMES_JOUR_1964_006_046_02
  27. Haringx, J.A. (1948), "On highly compressible helical springs and rubber rods and their application for vibration-free mountings, I", Philips Res. Reports, 3, 401-449.
  28. Haringx, J.A. (1949), "On highly compressible helical springs and rubber rods, and their application for vibration-free mountings", Phillips Res. Report, 4, 49-80.
  29. Hassan, A.L. and Billah, A.M. (2020), "Influence of ground motion duration and isolation bearings on the seismic response of base-isolated bridges", Eng. Struct., 222, 111129. https://doi.org/10.1016/j.engstruct.2020.111129.
  30. Hedayati Dezfuli, F. and Alam, M.S. (2018), "Smart lead rubber bearings equipped with ferrous shape memory alloy wires for seismically isolating highway bridges", J. Earthq. Eng., 22(6), 1042-1067. http://dx.doi.org/10.1080/13632469.2016.1269692.
  31. Henrych, J. and Major, R. (1979), The Dynamics of Explosion and its Use, Elsevier Scientific, Amsterdam.
  32. Iemura, H., Taghikhany, T. and Jain, S.K. (2007), "Optimum design of resilient sliding isolation system for seismic protection of equipments", Bull. Earthq. Eng., 5(1), 85-103. https://doi.org/10.1007/s10518-006-9010-5.
  33. Iwabe, N., Takayama, M., Kani, N. and Wada, A. (2000), "Experimental Study on the Effect of Tension for Rubber Bearings", 12th World Conference on Earthquake Engineering (WCEE), Auckland, New Zealand, Jan,
  34. Jangid, R. (2005), "Optimum friction pendulum system for nearfault motions", Eng. Struct., 27(3), 349-359. https://doi.org/10.1016/j.engstruct.2004.09.013.
  35. Jangid, R. (2007), "Optimum lead-rubber isolation bearings for near-fault motions", Eng. Struct., 29(10), 2503-2513. https://doi.org/10.1016/j.engstruct.2006.12.010.
  36. Jangid, R. (2010), "Stochastic response of building frames isolated by lead-rubber bearings", Struct. Control Health Monit., 17(1), 1-22. https://doi.org/10.1002/stc.266.
  37. Joghataie, A. and Mohebbi, M. (2008) , "Vibration controller design for confined masonry walls by distributed genetic algorithms", J. Struc. Eng., 134(2): 300-309. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(300).
  38. Kangda, M.Z. and Bakre, S. (2018), "The effect of LRB parameters on structural responses for blast and seismic loads", Arab. J. Sci. Eng., 43(4), 1761-1776. https://doi.org/10.1007/s13369-017-2732-7.
  39. Kangda, M.Z. and Bakre, S. (2019), "Positive-Phase Blast Effects on Base-Isolated Structures", Arab. J. Sci. Eng., 44(5), 4971- 4992. https://doi.org/10.1007/s13369-018-3667-3.
  40. Kangda, M.Z. and Bakre, S. (2020), "Performance evaluation of moment-resisting steel frame buildings under seismic and blastinduced vibrations", J. Vib. Eng. Technol., 8(1), 1-26. https://doi.org/10.1007/s42417-018-0027-2.
  41. Karimi, M.R.B. and Genes, M.C. (2019), "Probabilistic Behavior Assessment of Base-Isolated Buildings and Base Isolation Systems Subjected to Various Earthquakes with Different Components", Arab. J. Sci. Eng., 44(10), 8265-8288. https://doi.org/10.1007/s13369-019-03867-x.
  42. Kelly, J.M. (1986), "A seismic base isolation: review and bibliography", Soil Dyn. Earthq. Eng., 5(4), 202-216. https://doi.org/10.1016/0267-7261(86)90006-0.
  43. Kelly, J.M. (1997), Earthquake-resistant design with rubber, Springer, New York.
  44. Kelly, J.M. and Konstantinidis, D. (2011), Mechanics of rubber bearings for seismic and vibration isolation, John Wiley & Sons, Chichester.
  45. Khan, S., Saha, S.K., Matsagar, V.A. and Hoffmeister, B. (2017), "Fragility of steel frame buildings under blast load", J. Perform. Constr. Fac., 31(4), 04017019. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001016.
  46. Kilar, V. and Koren, D. (2009), "Seismic behaviour of asymmetric base isolated structures with various distributions of isolators", Eng. Struct., 31(4), 910-921. https://doi.org/10.1016/j.engstruct.2008.12.006.
  47. Kinney, G.F. and Graham, K.J. (2013), Explosive shocks in air, Springer Science & Business Media, New York.
  48. Kumar, M., Whittaker, A.S. and Constantinou, M.C. (2014), "An advanced numerical model of elastomeric seismic isolation bearings", Earthq. Eng. Struct. Dyn., 43(13), 1955-1974. https://doi.org/10.1002/eqe.2431.
  49. Kumar, M., Whittaker, A.S. and Constantinou, M.C. (2015), "Experimental investigation of cavitation in elastomeric seismic isolation bearings", Eng. Struct., 101, 290-305. https://doi.org/10.1016/j.engstruct.2015.07.014.
  50. Li, Y., Lv, Z. and Wang, Y. (2020), "Blast response of aluminum foam sandwich panel with double V-shaped face plate", Int. J. Impact. Eng., 144, 103666. https://doi.org/10.1016/j.ijimpeng.2020.103666.
  51. Losanno, D., Hadad, H. and Serino, G. (2019), "Design charts for eurocode-based design of elastomeric seismic isolation systems", Soil Dyn. Earthq. Eng., 119, 488-498. https://doi.org/10.1016/j.soildyn.2017.12.017.
  52. Mahmoud, S. (2016), "Dynamic response of adjacent buildings under explosive loads", Arab. J. Sci. Eng., 41(10), 4007-4018. https://doi.org/10.1007/s13369-016-2086-6.
  53. Markou, A.A., Stefanou, G. and Manolis, G.D. (2019), "Stochastic energy measures for hybrid base isolation systems", Soil Dyn. Earthq. Eng., 119, 454-470. https://doi.org/10.1016/j.soildyn.2018.01.027.
  54. Mavronicola, E. and Komodromos, P. (2014), "On the response of base-isolated buildings using bilinear models for LRBs subjected to pulse-like ground motions: sharp vs. smooth behaviour", Earthq. Struct., 7(6), 1223-1240. http://dx.doi.org/10.12989/eas.2014.7.6.1223.
  55. Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2006), OpenSees Command Language Manual, University of California, Berkeley, CA.
  56. Mills, C. (1987), "The design of concrete structure to resist explosions and weapon effects", Proceedings of the 1st Int. Conference on Concrete for Hazard Protections, Edinburgh.
  57. Mohebbi, M. and Dadkhah, H. (2017a), "Multi-objective semiactive base isolation system", Int. J. Optim. Civil. Eng., 7(3), 319-338. http://ijoce.iust.ac.ir/article-1-300-en.html.
  58. Mohebbi, M. and Dadkhah, H. (2017b), "Performance of semiactive base isolation systems under external explosion", Int. J. Struct. Stab. Dyn., 17(10), 1750112. http://dx.doi.org/10.1142/S0219455418500256.
  59. Mohebbi, M. and Dadkhah, H. (2019), "Optimal smart base isolation system for multiple earthquakes", Int. J. Optim. Civil. Eng., 9(1), 19-37. http://ijoce.iust.ac.ir/article-1-373-en.html
  60. Mohebbi, M. and Dadkhah, H. (2020), "Optimal design of base isolation system under blast loading", Int. J. Optim. Civil. Eng., 10(1), 101-115. http://ijoce.iust.ac.ir/article-1-424-en.html.
  61. Mohebbi, M., Dadkhah, H. and Rasouli Dabbagh, H. (2018), "A genetic algorithm-based design approach for smart base isolation systems", J. Intell. Mater. Syst. Struct., 29(7), 1315-1332. https://doi.org/10.1177%2F1045389X17733058. https://doi.org/10.1177%2F1045389X17733058
  62. Mondal, P.D., Ghosh, A.D. and Chakraborty, S. (2014), "Performance of NZ systems in the mitigation of underground blast induced vibration of structures", J. Vib. Control, 20(13), 2019-2031. https://doi.org/10.1177%2F1077546313481050. https://doi.org/10.1177%2F1077546313481050
  63. Mondal, P.D., Ghosh, A.D. and Chakraborty, S. (2017), "Performances of various base isolation systems in mitigation of structural vibration due to underground blast induced ground motion", Int. J. Struct. Stab. Dyn., 17(4), 1750043. https://doi.org/10.1142/S0219455417500432.
  64. Nagarajaiah, S. and Sun, X. (2001), "Base-isolated FCC building: impact response in Northridge earthquake", J. Struct. Eng., 127(9), 1063-1075. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1063).
  65. Nagarajaiah, S. and Xiaohong, S. (2000), "Response of baseisolated USC hospital building in Northridge earthquake", J. Struct. Eng., 126(10), 1177-1186. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1177).
  66. Naumyenko, I. and Petrovsky, I. (1956), The Shock Wave of a Nuclear Explosion, BOEH, CCCP, Moscow.
  67. Nourzadeh, D.D., Humar, J. and Braimah, A. (2017), "Comparison of response of building structures to blast loading and seismic excitations", Procedia Eng., 210, 320-325. https://doi.org/10.1016/j.proeng.2017.11.083.
  68. Oliveto, N.D., Markou, A.A. and Athanasiou, A. (2019), "Modeling of high damping rubber bearings under bidirectional shear loading", Soil Dyn. Earthq. Eng., 118, 179-190. https://doi.org/10.1016/j.soildyn.2018.12.017.
  69. Panchal, V. and Jangid, R. (2008), "Variable friction pendulum system for seismic isolation of liquid storage tanks", Nucl. Eng. Des., 238(6), 1304-1315. https://doi.org/10.1016/j.nucengdes.2007.10.011.
  70. Pigouni, A.E., Castellano, M.G., Infanti, S. and Colato, G.P. (2020), "Full-scale dynamic testing of pendulum isolators (Curved surface sliders)", Soil Dyn. Earthq. Eng., 130, 105983. https://doi.org/10.1016/j.soildyn.2019.105983.
  71. Pourzeynali, S. and Zarif, M. (2008), "Multi-objective optimization of seismically isolated high-rise building structures using genetic algorithms", J. Sound Vib., 311(3-5), 1141-1160. https://doi.org/10.1016/j.jsv.2007.10.008.
  72. Rao, S.S. (2009), Engineering Optimization: Theory and Practice, John Wiley & Sons, New Jersey.
  73. Reyes, J.C., Gonzalez, C. and Kalkan, E. (2018), "Improved ASCE/SEI 7-10 ground-motion scaling procedure for nonlinear analysis of buildings", J. Earthq. Eng., 1-24. https://doi.org/10.1080/13632469.2018.1526140.
  74. Robinson, W. and Tucker, A. (1976), "A lead-rubber shear damper", Bull. New Zealand Natl. Soc. Earthquake Engrg, 4, 251-259.
  75. Robinson, W.H. (1982), "Lead-rubber hysteretic bearings suitable for protecting structures during earthquakes", Earthq. Eng. Struct. Dyn., 10(4), 593-604. https://doi.org/10.1002/eqe.4290100408.
  76. Roy, B.K. and Chakraborty, S. (2015), "Robust optimum design of base isolation system in seismic vibration control of structures under random system parameters", Struct. Saf., 55, 49-59. https://doi.org/10.1016/j.strusafe.2015.02.005.
  77. Sahu, D.K. and Patro, S.K. (2018), "Performance of energy dissipation devices in mitigation of blast-induced vibration of buildings", ASCE India Conference 2017, New Delhi, India. https://doi.org/10.1061/9780784482032.047.
  78. Shi, Y. and Stewart, M.G. (2015), "Damage and risk assessment for reinforced concrete wall panels subjected to explosive blast loading", Int. J. Impact. Eng., 85, 5-19. https://doi.org/10.1016/j.ijimpeng.2015.06.003.
  79. Shin, J., Scott, D.W., Stewart, L.K. and Jeon, J.S. (2020), "Multihazard assessment and mitigation for seismically-deficient RC building frames using artificial neural network models", Eng. Struct., 207, 110204. https://doi.org/10.1016/j.engstruct.2020.110204.
  80. Shiravand, M.R. and Rasouli, M. (2019), "Effects of substructure mass participation on natural period of multi-column base isolated bridges", Struct., 20, 88-104. https://doi.org/10.1016/j.istruc.2019.03.002.
  81. Shoaei, P. and Mahsuli, M. (2019), "Reliability-based design of steel moment frame structures isolated by lead-rubber bearing systems", Struct., 20, 765-778. https://doi.org/10.1016/j.istruc.2019.06.020.
  82. Shoji, G., Saito, K., Kameda, T. and Fueki, T.A. (2004), "Seismic performance of a laminated rubber bearing under tensile axial loading", Proceedings: 13th World Conference on Earthquake Engineering,
  83. Somerville, P.G. (1997), Development of ground motion time histories for phase 2 of the FEMA/SAC steel project, SAC Joint Venture,
  84. Su, L., Ahmadi, G. and Tadjbakhsh, I.G. (1991), "Performance of sliding resilient-friction base-isolation system", J. Struct. Eng., 117(1), 165-181. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(165).
  85. Sun, G., Zhang, J., Li, S., Fang, J., Wang, E. and Li, Q. (2019), "Dynamic response of sandwich panel with hierarchical honeycomb cores subject to blast loading", Thin-Walled Struct., 142, 499-515. https://doi.org/10.1016/j.tws.2019.04.029.
  86. Tolani, S., Bharti, S.D., Shrimali, M.K. and Datta, T.K. (2020), "Effect of Surface Blast on Multistory Buildings", J. Perform. Construct. Fac., 34(2), 04020015. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001415.
  87. Tyler, R. and Robinson, W. (1984), "High-strain tests on leadrubber bearings for earthquake loadings", Earthq. Eng., 17(2), 90-105. https://doi.org/10.5459/bnzsee.17.2.90-105.
  88. UFC 3-340-02 (2008), "Structures to Resist the Effects of Accidental Explosions", US Department of Defense,
  89. Warn, G.P. and Whittaker, A.S. (2006), A Study of the Coupled Horizontal-Vertical Behavior of Elastomeric and Lead-Rubber Seismic Isolation Bearings, University at Buffalo, New York.
  90. Warn, G.P., Whittaker, A.S. and Constantinou, M.C. (2007), "Vertical stiffness of elastomeric and lead-rubber seismic isolation bearings", J. Struct. Eng., 133(9), 1227-1236. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:9(1227).
  91. Wu, C. and Hao, H. (2005), "Modeling of simultaneous ground shock and airblast pressure on nearby structures from surface explosions", Int. J. Impact. Eng., 31(6), 699-717. https://doi.org/10.1016/j.ijimpeng.2004.03.002.
  92. Yamamoto, M., Minewaki, S., Yoneda, H. and Higashino, M. (2012), "Nonlinear behavior of high damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling", Earthq. Eng. Struct. Dyn., 41(13), 1845-1860. https://doi.org/10.1002/eqe.2161.
  93. Yang, Q., Liu, W., He, W. and Feng, D. (2010), "Tensile stiffness and deformation model of rubber isolators in tension and tension-shear states", J. Eng. Mech., 136(4), 429-437. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000007.
  94. Zareian, F., Lignos, D. and Krawinkler, H. (2010), "Evaluation of seismic collapse performance of steel special moment resisting frames using FEMA P695 (ATC-63) methodology", Structures Congress 2010, Orlando, Florida.
  95. Zehtab, B. and Salehi, H. (2019), "Finite-element-based monte carlo simulation for sandwich panel-retrofitted unreinforced masonry walls subject to air blast", Arab. J. Sci. Eng., 1-20. https://doi.org/10.1007/s13369-019-04123-y.
  96. Zhang, L., Chen, L., Fang, Q. and Zhang, Y.d. (2016), "Mitigation of blast loadings on structures by an anti-blast plastic water wall", J. Cent. South. Univ., 23(2), 461-469. https://doi.org/10.1007/s11771-016-3091-3.
  97. Zhang, R. and Phillips, B.M. (2015), "Performance and protection of base-isolated structures under blast loading", J. Eng. Mech., 142(1), 04015063. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000974.