한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제20권11호
  • /
  • Pages.115-120
  • /
  • 2021
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

원통형 궐련의 접착제 경화를 위한 열전달 시뮬레이션에 관한 연구

A Study on Thermal Simulation for Adhesive Curing of Cylindrical Cigarettes

  • 박용우 (경상대학교 대학원 융합기계공학과) ;
  • 문성민 (경상대학교 기계항공공학부) ;
  • 장기 (중국 절강쌍환전동유한회사) ;
  • 류성기 (경상대학교 기계항공공학부)
  • Park, Yong-Woo (Department of Convergence Mechanical Engineering, Gyeongsang National University) ;
  • Moon, Seong-Min (School of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Zhang, Qi (R&D Department, Zhejiang Shuanghuan Driveline Co., LTD.) ;
  • Lyu, Sung-Ki (School of Mechanical & Aerospace Engineering, Gyeongsang National University)
  • 투고 : 2021.07.23
  • 심사 : 2021.08.25
  • 발행 : 2021.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, cigarettes, which are an essential element in the production of tobacco, are generally not cylindrical. The main materials used for cigarettes are generally hemp and pulp. For the production of cylindrical cigarettes, the cigarettes or cylinders are mounted via gluing. This adhesive is a vinyl acetate emulsion, a high-temperature melt adhesive, and is adhered in a cylindrical shape immediately after being linearly applied to the inner surface of the paper roll or a local part. These adhesives are greatly affected by the atmospheric temperature of the manufacturing space in summer and winter. In the summer, even if the adhesive is temporarily adhered, the coagulation time of the adhesive is long, and problems such as deterioration of the adhesive state occur. in the winter, there is a problem that the temperature of the manufacturing space is low and the adhesive force of the adhesive is poor, resulting in defective adhesive products. In order to solve these problems, another heat transfer device is utilized to cure the remaining adhesive to ensure higher adhesiveness.

키워드

과제정보

This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (Grant No. : NRF-2016R1D1A1A09920105).

참고문헌

  1. Lee, E. J., Kim, N. H., Song, G. S., and Lee, J. P., "Heat and Moisture Transfer Characteristics of a Plate-type Enthalpy Exchanger made of Paper", International Journal of Air-Conditioning and Refrigeration, Vol. 19, No. 01, pp. 85-92, 2011. https://doi.org/10.1142/S2010132511000429
  2. Kwon, H. K., Yoo, S. Y., "A Study on the Local Heat Transfer Characteristics for Circular Tubes Using Heat Transfer Promoter", Transactions of the Korean Society of Mechanical Engineers B, Vol. 30, No. 5, pp. 389-396, 2006. https://doi.org/10.3795/KSME-B.2006.30.5.389
  3. Kim, N. H, Sim, Y. S., "Reduction of the Wet Surface Heat Transfer Coefficients from Experimental Data", International Journal of Air-Conditioning and Refrigeration, Vol. 12, No. 1, pp. 37-49, 2004.
  4. Lee, E. J., Lee, J. P., Sim, H. M., and Kim, N. H., "Modeling and Verification of Heat and Moisture Transfer in an Enthalpy Exchanger mad of Paper Membrane", International Journal of Air-Conditioning and Refrigeration, Vol. 20, No. 03, pp. 1250015-13, 2012. https://doi.org/10.1142/S2010132512500150
  5. Yang, H. D. Yoo, J. Y., and Park, S. H., "A Study on Cooling Characteristics of the LED Lamp Heat Sink for Automobile by Forced Convection", The Korean Society of Manufacturing Process Engineers Vol. 17 No. 6 pp. 117-123. 2018. https://doi.org/10.14775/ksmpe.2018.17.6.117
  6. Lee, Y. M., Hwang, T. S., Kim, H., Nam, H. T., Lee, K. H., and Kang, M. C., "Modeling Technology on Free-form Surface of a New Military Personal Head using Quick Surface Method", The Korean Society of Manufacturing Process Engineers, Vol. 17 No. 6, pp. 170-176, 2018. https://doi.org/10.14775/ksmpe.2018.17.6.170
  7. Zhang, L. Z. and Niu, J. L., "Effectiveness correlations for heat and moisture transfer processes in an enthalpy exchanger with membrane cores", J. Heat Transfer, Vol. 124, pp. 922-929, 2002. https://doi.org/10.1115/1.1469524
  8. Zhang, L. Z., 2008, Heat and mass transfer in plate-fin sinusoidal passages with vapor permeable wall materials, Int. J. Heat Mass Transfer, Vol. 51, pp. 618-629, 2008. https://doi.org/10.1016/j.ijheatmasstransfer.2007.04.050
  9. Yoon, C. H., Kwon, S. K., Kim, J., and Choi, H. J., "An experimental study regarding the determination of seasonal heat transfer coefficient in KURT by convection conditions", Safety Science, Vol. 51, No, 1, pp. 241-249, 2013. https://doi.org/10.1016/j.ssci.2012.06.023
  10. Kim, D. W., "Heat Transfer Correlations for Air-Water Two-Phase Flow of Different Flow Patterns In a Horizontal Pipe", Journal of Mechanical Science and Technology, Vol. 15, No. 12, pp. 1711-1727, 2001.