DOI QR코드

DOI QR Code

A Study on the Life Cycle Establishment and Improvement of Main Parts for Electric Locomotive

전기기관차 주요부품의 수명주기 설정 및 개선방안에 관한 연구

  • Lee, Doek Koo (Department of Rolling Stock System, Seoul National University of Science & Technolgy) ;
  • Lee, Hi Sung (Department of Rolling Stock System, Seoul National University of Science & Technolgy)
  • 이덕구 (서울과학기술대학교 철도차량시스템공학과) ;
  • 이희성 (서울과학기술대학교 철도차량시스템공학과)
  • Received : 2020.11.18
  • Accepted : 2021.02.23
  • Published : 2021.04.30

Abstract

The 8200-unit electric locomotive, which is a high-efficiency multipurpose electric locomotive, is a German model, namely BR152 series ES64F, and it is manufactured to suit the operating conditions in Korea. Since 2003, 83 locomotives have been introduced in Korea, and they have been operating in the general railway sector for both passenger and freight transport. Although more than 15 years have passed since their first introduction, owing to the characteristics of vehicles introduced overseas, responding promptly to failures has been difficult owing to problems related to factors such as transfer of technology and procurement of parts for maintenance. Furthermore, there have been difficulties in operating the locomotives on the basis of the manufacturer-recommended time-between-overhaul (TBO) cycle. Therefore, a new TBO should be determined. To support the development of a reliability-based maintenance system, this study conducted a reliability and TBO analysis by using failure data obtained from KOVIS, and future management measures are presented.

Keywords

References

  1. Ministry of Land, Infrastructure and Transport, Railway Accident Investigation Report, Report Number : APAIB/R 2014-8, Aviation and Railway Accident Investigation Board.
  2. Ministry of Land, Infrastructure and Transport, Railway Accident Investigation Report, Report Number : APAIB/R 2011-2, Aviation and Railway Accident Investigation Board.
  3. J. H. Hwang, J. T. Jung and C. S. Kim, "Evaluation of Optimal Time Between Overhaul Period of the Traction Motor for High-Speed Railway Vehicle", Proceedings of The Korean Society of Railway Spring Conference(in Korean), 2016.
  4. J. T. Jung and C. S. Kim, "A Study on Evaluation of the Economic Overhaul for Transmission of the High Speed Train", Proceedings of The Korean Society of Railway Spring Conference, pp. 1209-1304, 2015.
  5. D. S. Sim, T. H. Heo, Y. I. Park, H. S. Kim, K. H. Shin and S. K. Cheong, "Estimation of the Overhaul Cycle Time for KTX Wheelset Bearing by RCF Test", J. Korean of Soc. Saf., Vol. 31, No 1, pp. 13-18, 2016. https://doi.org/10.14346/JKOSOS.2016.31.1.013
  6. J. T. Jung and C. S. Kim, "Evaluation of Optimal Time Between Overhaul Period of the First Driving Devices for High-Speed Railway Vehicle", Journal of the Korea Academia-Industrial Cooperation Society, Vol. 16, No. 12 pp. 8700-870, 2015. https://doi.org/10.5762/KAIS.2015.16.12.8700
  7. I. S. Kim, "A Study on the Conformity of KTX Oil Damper TBO", Master's Thesis, Seoul National University of Science and Technology, 2015.
  8. Y. K. Choi, "A Research on the Optimal Service Life of Inverter System in EMU", Master's Thesis, Seoul National University of Science and Technology, 2019.
  9. KORAIL Human Resources Development Institute, "Textbook of 8200 Type Electric Locomotive", 2014.
  10. KORAIL, Rules for Maintenance of Rolling Stock, 2018.
  11. Y. H. Cho, H. W. Lee, J. W. Kim and J. M. Yans, "Development of Reliability Management System for Vehicle Component in Korea Railway Corporations", Journal of Transactions of the Korean Society of Mechanical Engineers A, Vol. 43, No. 4, pp. 267-275, 2019. https://doi.org/10.3795/KSME-A.2019.43.4.267