Analysis of IoT Security in Wi-Fi 6

Wi-Fi 6 환경에서의 IoT 보안 분석

  • Kim, HyunHo (College of Software Convergence, Dongseo University) ;
  • Song, JongGun (College of Software Convergence, Dongseo University)
  • 김현호 (동서대학교 소프트웨어 융합대학) ;
  • 송종근 (동서대학교 소프트웨어 융합대학)
  • Received : 2021.02.09
  • Accepted : 2021.03.30
  • Published : 2021.03.31

Abstract

Wi-Fi provides some low-power connection solutions that other Bluetooth cannot provide, and at the same time brings many benefits. First, there is a potentially higher data rate: it can reach 230mbps. Wi-Fi coverage is also wider than competitors, and its operating frequency is also 5GHz, which is much less congested than 2.4GHz. Finally, it also supports IP networks, which is important if you want to send data to the cloud without complexity. The 802.11ac standard of the previous generation still accounts for most shipments (80.9%) and revenue (76.2%). However, there is a limit to accepting IoT devices that will continue to increase significantly in the future. To solve this problem, the new Wi-Fi 6 standard is expected to be the solution (IEEE 802.11ax) which is quickly becoming the main driving force of the wireless local area network (WLAN) market. According to IDC market research analysts, in the first quarter of 2020, independent access points (APs) supported by Wi-Fi 6 accounted for 11.8% of shipments, but 21.8% of revenue. In this paper, we have compared and analyzed the IoT connectivity, QoS, and security requirements of devices using Wi-Fi 6 network.

Keywords

Acknowledgement

This work was supported by the Dongseo University Research Fund of 2020. (DSU-20200018)

References

  1. Cisco Annual Internet Report(2018-2023) (Rep.). (n.d.).
  2. Kang. B. W., Kim. S. H. (2018). A Development of Non-Invasive Body Monitoring IoT Sensor for Smart Silver Healthcare. The Korea Institute of Converence Signal Processing Quarterly, 19(1), 28-34.
  3. DeepTechHub. (n.d.). Welcome to the IoT Security Foundation. Retrieved from http://www.iotsecurityfoundation.org/
  4. Commission, I. -. (n.d.). International. Retrieved from http://www.iec.ch/
  5. RF Wireless World. (n.d.). Retrieved from https://www.rfwireless-world.com/Terminology/What-is-BSS-Coloring-in-WLAN-802-11ax.html
  6. Nam, J., Lee, J., Kwon, S., & Choi, H. (2019). Comparative Analysis on Security Protocols of WPA3 Standard for Secure Wireless LAN Environments. The Journal of Korean Institute of Communications and Information Sciences, 44(10), 1878-1887. doi:10.7840/kics.2019.44.10.1878
  7. KIM, D. S. (2018, November). Feasibility Analysis of IEEE 802.11 ax in Industrial IoT. Proceedings of Symposium of the Korean Institute of communications and Information Sciences. (pp.24-25).
  8. Farouk, N., El-Mahdy, A., & Elbakly, A. (2019, September). Two-Way DF Relaying for OFDMA System. In 2019 Signal Processing: Algorithms, Architectures, Arrangements, and Applications (SPA) (pp. 121-125). IEEE.
  9. Lee, K. H. (2019). Using OFDMA for MU-MIMO User Selection in 802.11 ax-Based Wi-Fi Networks. IEEE Access, 7, 186041-186055. https://doi.org/10.1109/access.2019.2960555
  10. Chen, Q., Weng, Z., & Chen, G. (2019). A Target Wake Time Scheduling Scheme for Uplink Multiuser Transmission in IEEE 802.11 ax-Based Next Generation WLANs. IEEE Access, 7, 158207-158222. https://doi.org/10.1109/access.2019.2950464
  11. HaddadPajouh, H., Dehghantanha, A., Parizi, R. M., Aledhari, M., & Karimipour, H. (2019). A survey on internet of things security: Requirements, challenges, and solutions. Internet of Things, 100129.
  12. Oh, S. R., & Kim, Y. G. (2017, February). Security requirements analysis for the IoT. In 2017 International Conference on Platform Technology and Service (PlatCon) (pp. 1-6). IEEE.