Acknowledgement
이 성과는 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(NRF-2019R1C1C1004232).
References
- M. Vaezi, H. Seitz, and S. Yang. "A review on 3D micro-additive manufacturing technologies." The International Journal of Advanced Manufacturing Technology 67.5-8 (2013): 1721-1754.. https://doi.org/10.1007/s00170-012-4605-2
- W. Gao, et al. "The status, challenges, and future of additive manufacturing in engineering." Computer-Aided Design 69 (2015): 65-89.
- G. Loke, et al. "Structured multimaterial filaments for 3D printing of optoelectronics." Nature communications 10.1 (2019): 1-10. https://doi.org/10.1038/s41467-018-07882-8
- D. Espalin, et al. "3D Printing multifunctionality: structures with electronics." The International Journal of Advanced Manufacturing Technology 72.5-8 (2014): 963-978. https://doi.org/10.1007/s00170-014-5717-7
- Z. Zhu, H. S. Park, and M. C. McAlpine. "3D printed deformable sensors." Science advances 6.25 (2020): eaba5575. https://doi.org/10.1126/sciadv.aba5575
- Z. Zhu, et al. "3D printed functional and biological materials on moving freeform surfaces." Advanced Materials 30.23 (2018): 1707495. https://doi.org/10.1002/adma.201707495
- S. J. Hong, J. W. Kim, C. J. Han, Y. S. Kim, T. W. Hong, "Trends on Technology of Eco-friendly Metal and Ceramic Nanoparticle Inks for Direct Printing", J. Microelectron.Packag. Soc., 17(2), 1-9, 2010.
- T. S. Wei, et al. "3D printing of customized li-ion batteries with thick electrodes." Advanced Materials 30.16 (2018): 1703027. https://doi.org/10.1002/adma.201703027
- C. H. Kim, et al. "High-power aqueous zinc-ion batteries for customized electronic devices." ACS nano 12.12 (2018): 11838-11846. https://doi.org/10.1021/acsnano.8b02744
- C. W. Hull, "The birth of 3D printing." Research-Technology Management 58.6 (2015): 25-30.
- B. Y. Ahn, et al. "Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes." Science 323.5921 (2009): 1590-1593. https://doi.org/10.1126/science.1168375
- S. Y. Wu, et al. "3D-printed microelectronics for integrated circuitry and passive wireless sensors." Microsystems & Nanoengineering 1.1 (2015): 1-9.
- K. Sun, et al. "3D printing of interdigitated Li-Ion microbattery architectures." Advanced materials 25.33 (2013): 4539-4543. https://doi.org/10.1002/adma.201301036
- Y. L. Kong, et al. "3D printed quantum dot light-emitting diodes." Nano letters 14.12 (2014): 7017-7023. https://doi.org/10.1021/nl5033292
- R. D. Gerke, "Embedded passives technology." Resistor 146.188 (2005): 635.
- N. Zhou, et al. "Gigahertz electromagnetic structures via direct ink writing for radio-frequency oscillator and transmitter applications." Advanced Materials 29.15 (2017): 1605198..
- J. J. Adams, et al. "Conformal printing of electrically small antennas on three-dimensional surfaces." Advanced Materials 23.11 (2011): 1335-1340. https://doi.org/10.1002/adma.201003734
- Y. Lu, et al. "Direct-print/cure as a molded interconnect device (MID) process for fabrication of automobile cruise controllers." Journal of Mechanical Science and Technology 29.12 (2015): 5377-5385.
- J. A. Lewis, and B. Y. Ahn. "Three-dimensional printed electronics." Nature 518.7537 (2015): 42-43. https://doi.org/10.1038/518042a
- J. C. Bae, et al. "3D-Printed Quantum Dot Nanopixels." ACS nano 14.9 (2020): 10993-11001. https://doi.org/10.1021/acsnano.0c04075
- Y. Huang, et al. "3D-Printed OFETs of the 1, 4-bis (3-phenylquinoxalin-2-yl) benzene-based polymer semiconductors." Polymer Chemistry 8.33 (2017): 4878-4886. https://doi.org/10.1039/C7PY00810D
- D. Majak, J. Fan, and M. Gupta. "Fully 3D printed OECT based logic gate for detection of cation type and concentration." Sensors and Actuators B: Chemical 286 (2019): 111-118. https://doi.org/10.1016/j.snb.2019.01.120
- J. Kwon, et al. "Three-dimensional monolithic integration in flexible printed organic transistors." Nature communications 10.1 (2019): 1-10. https://doi.org/10.1038/s41467-018-07882-8
- P. C. Hutter, et al. "Efficiency of the switching process in organic electrochemical transistors." ACS applied materials & interfaces 8.22 (2016): 14071-14076. https://doi.org/10.1021/acsami.6b02698
- X. Li, et al. "3D-printed stretchable micro-supercapacitor with remarkable areal performance." Advanced Energy Materials 10.14 (2020): 1903794. https://doi.org/10.1002/aenm.201903794
- H. Cui, et al. "Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response." Nature materials 18.3 (2019): 234-241. https://doi.org/10.1038/s41563-018-0268-1
- F. Kim, et al. "3D printing of shape-conformable thermoelectric materials using all-inorganic Bi 2 Te 3-based inks." Nature Energy 3.4 (2018): 301-309.. https://doi.org/10.1038/s41560-017-0071-2
- M. P. Mahmud, et al. "3D-Printed Triboelectric Nanogenerators: State of the Art, Applications, and Challenges." Advanced Energy and Sustainability Research 2.3 (2021): 2000045.
- N. Zhou, et al. "Perovskite nanowire-block copolymer composites with digitally programmable polarization anisotropy.' Science advances 5.5 (2019): eaav8141. https://doi.org/10.1126/sciadv.aav8141
- M. Chen, et al. "3D nanoprinting of perovskites." Advanced Materials 31.44 (2019): 1904073.. https://doi.org/10.1002/adma.201904073
- M. L. Seol, et al. "All 3D printed energy harvester for autonomous and sustainable resource utilization." Nano Energy 52 (2018): 271-278. https://doi.org/10.1016/j.nanoen.2018.07.061
- H. Li, et al. "3D printed flexible triboelectric nanogenerator with viscoelastic inks for mechanical energy harvesting." Nano Energy 58 (2019): 447-454. https://doi.org/10.1016/j.nanoen.2019.01.066
- Y. Ni, et al. "A review of 3D-printed sensors." Applied Spectroscopy Reviews 52.7 (2017): 623-652. https://doi.org/10.1080/05704928.2017.1287082
- S. Z. Guo, et al. "3D printed stretchable tactile sensors." Advanced Materials 29.27 (2017): 1701218. https://doi.org/10.1002/adma.201701218
- R. I. Haque, et al. "Self-powered triboelectric touch sensor made of 3D printed materials." Nano Energy 52 (2018): 54-62. https://doi.org/10.1016/j.nanoen.2018.07.038
- J. H. Kang, et al. "Three-dimensionally printed pressure sensor arrays from hysteresis-less stretchable piezoresistive composites." RSC Advances 9.68 (2019): 39993-40002. https://doi.org/10.1039/C9RA08461D
- K. Li, et al. "3D printed stretchable capacitive sensors for highly sensitive tactile and electrochemical sensing." Nanotechnology 29.18 (2018): 185501. https://doi.org/10.1088/0957-4484/29/18/185501
- S. H. Park, et al. "3D printed polymer photodetectors." Advanced Materials 30.40 (2018): 1803980. https://doi.org/10.1002/adma.201803980
- M. G. Kang, S. D. Kim, "Bonding Technologies for Chip to Textile Interconnection", J. Microelectron. Packag. Soc., 27(4), 1-10, 2020. https://doi.org/10.6117/KMEPS.2020.27.4.001
- Y. Hong, et al. "3D printed microfluidic device with microporous Mn2O3-modified screen printed electrode for realtime determination of heavy metal ions." ACS applied materials & interfaces 8.48 (2016): 32940-32947. https://doi.org/10.1021/acsami.6b10464
- M. S. Mannoor, et al. "3D printed bionic ears." Nano letters 13.6 (2013): 2634-2639. https://doi.org/10.1021/nl4007744
- Y. H. Cho, et al. "3D Electrodes for Bioelectronics." Advanced Materials (2021): 2005805.
- K. Yamada, M. Watanabe, and J. Sone. "Three-dimensional printing of conducting polymer microstructures into transparent polymer sheet: Relationship between process resolution and illumination conditions." Optical Review 21.5 (2014): 679-682. https://doi.org/10.1007/s10043-014-0109-7
- A. D. Valentine, et al. "Hybrid 3D printing of soft electronics." advanced Materials 29.40 (2017): 1703817. https://doi.org/10.1002/adma.201703817
- W. I. Jung, et al. "Three-dimensional nanoprinting via charged aerosol jets." Nature 592.7852 (2021): 54-59. https://doi.org/10.1038/s41586-021-03353-1
- Y. S. Park, et al. "Near-field electrospinning for three-dimensional stacked nanoarchitectures with high aspect ratios." Nano letters 20.1 (2019): 441-448. https://doi.org/10.1021/acs.nanolett.9b04162
- T. Tilford, et al. "Design, manufacture and test for reliable 3D printed electronics packaging." Microelectronics Reliability 85 (2018): 109-117. https://doi.org/10.1016/j.microrel.2018.04.008