과제정보
This work was supported by Research Resettlement Fund for the new faculty of Seoul National University and grant no 03-2015-0020 from the SNUH Research Fund.
참고문헌
- van der Linde D, Konings EE, Slager MA, Witsenburg M, Helbing WA, Takkenberg JJ, et al. Birth prevalence of congenital heart disease worldwide: a systematic review and meta-analysis. J Am Coll Cardiol 2011;58:2241-2247 https://doi.org/10.1016/j.jacc.2011.08.025
- GBD 2017 Congenital Heart Disease Collaborators. Global, regional, and national burden of congenital heart disease, 1990-2017: a systematic analysis for the Global Burden of Disease Study 2017. Lancet Child Adolesc Health 2020;4:185-200 https://doi.org/10.1016/S2352-4642(19)30402-X
- Hoffman JI, Kaplan S. The incidence of congenital heart disease. J Am Coll Cardiol 2002;39:1890-1900 https://doi.org/10.1016/S0735-1097(02)01886-7
- Dolk H, Loane M, Garne E; European Surveillance of Congenital Anomalies (EUROCAT) Working Group. Congenital heart defects in Europe: prevalence and perinatal mortality, 2000 to 2005. Circulation 2011;123:841-849 https://doi.org/10.1161/CIRCULATIONAHA.110.958405
- Wilson HK, Feins RH. Simulation in cardiothoracic surgery. In: Stefanidis D, Korndorffer Jr J, Sweet R, eds. Comprehensive healthcare simulation: surgery and surgical subspecialties. Cham: Springer, 2019:263-274
- Rose AS, Webster CE, Harrysson OL, Formeister EJ, Rawal RB, Iseli CE. Pre-operative simulation of pediatric mastoid surgery with 3D-printed temporal bone models. Int J Pediatr Otorhinolaryngol 2015;79:740-744 https://doi.org/10.1016/j.ijporl.2015.03.004
- Burdall OC, Makin E, Davenport M, Ade-Ajayi N. 3D printing to simulate laparoscopic choledochal surgery. J Pediatr Surg 2016;51:828-831 https://doi.org/10.1016/j.jpedsurg.2016.02.093
- Ryan JR, Almefty KK, Nakaji P, Frakes DH. Cerebral aneurysm clipping surgery simulation using patient-specific 3D printing and silicone casting. World Neurosurg 2016;88:175-181 https://doi.org/10.1016/j.wneu.2015.12.102
- Jastifer JR, Gustafson PA. Three-dimensional printing and surgical simulation for preoperative planning of deformity correction in foot and ankle surgery. J Foot Ankle Surg 2017;56:191-195 https://doi.org/10.1053/j.jfas.2016.01.052
- Binder TM, Moertl D, Mundigler G, Rehak G, Franke M, Delle-Karth G, et al. Stereolithographic biomodeling to create tangible hard copies of cardiac structures from echocardiographic data: in vitro and in vivo validation. J Am Coll Cardiol 2000;35:230-237 https://doi.org/10.1016/S0735-1097(99)00498-2
- Yoo SJ, Thabit O, Kim EK, Ide H, Yim D, Dragulescu A, et al. 3D printing in medicine of congenital heart diseases. 3D Print Med 2016;2:3
- Jacobs S, Grunert R, Mohr FW, Falk V. 3D-imaging of cardiac structures using 3D heart models for planning in heart surgery: a preliminary study. Interact Cardiovasc Thorac Surg 2008;7:6-9 https://doi.org/10.1510/icvts.2007.156588
- Ma XJ, Tao L, Chen X, Li W, Peng ZY, Chen Y, et al. Clinical application of three-dimensional reconstruction and rapid prototyping technology of multislice spiral computed tomography angiography for the repair of ventricular septal defect of tetralogy of Fallot. Genet Mol Res 2015;14:1301-1309 https://doi.org/10.4238/2015.February.13.9
- Hands-on surgical simulation in congenital heart surgery: literature review and future perspective. Semin Thorac Cardiovasc Surg 2020;32:98-105 https://doi.org/10.1053/j.semtcvs.2019.06.003
- Chen SA, Ong CS, Malguria N, Vricella LA, Garcia JR, Hibino N. Digital design and 3D printing of aortic arch reconstruction in HLHS for surgical simulation and training. World J Pediatr Congenit Heart Surg 2018;9:454-458 https://doi.org/10.1177/2150135118771323
- Jivanji SGM, Qureshi SA, Rosenthal E. Novel use of a 3D printed heart model to guide simultaneous percutaneous repair of severe pulmonary regurgitation and right ventricular outflow tract aneurysm. Cardiol Young 2019;29:534-537 https://doi.org/10.1017/S1047951119000106
- Meyer-Szary J, Woz' niak-Mielczarek L, Sabiniewicz D, Sabiniewicz R. Feasibility of in-house rapid prototyping of cardiovascular three-dimensional models for planning and training non-standard interventional procedures. Cardiol J 2019;26:790-792 https://doi.org/10.5603/CJ.2019.0115
- Velasco Forte MN, Byrne N, Valverde I, Gomez Ciriza G, Hermuzi A, Prachasilchai P, et al. Interventional correction of sinus venosus atrial septal defect and partial anomalous pulmonary venous drainage: procedural planning using 3D printed models. JACC Cardiovasc Imaging 2018;11:275-278 https://doi.org/10.1016/j.jcmg.2017.07.010
- Hussein N, Honjo O, Haller C, Coles JG, Hua Z, Van Arsdell G, et al. Quantitative assessment of technical performance during hands-on surgical training of the arterial switch operation using 3-dimensional printed heart models. J Thorac Cardiovasc Surg 2020;160:1035-1042 https://doi.org/10.1016/j.jtcvs.2019.11.123
- Hussein N, Lim A, Honjo O, Haller C, Coles JG, Van Arsdell G, et al. Development and validation of a procedure-specific assessment tool for hands-on surgical training in congenital heart surgery. J Thorac Cardiovasc Surg 2020;160:229-240.e1 https://doi.org/10.1016/j.jtcvs.2019.11.130
- Yoo SJ, Spray T, Austin EH 3rd, Yun TJ, van Arsdell GS. Hands-on surgical training of congenital heart surgery using 3-dimensional print models. J Thorac Cardiovasc Surg 2017;153:1530-1540 https://doi.org/10.1016/j.jtcvs.2016.12.054
- Cantinotti M, Valverde I, Kutty S. Three-dimensional printed models in congenital heart disease. Int J Cardiovasc Imaging 2017;33:137-144 https://doi.org/10.1007/s10554-016-0981-2
- Yang DH, Park S-H, Lee K, Kim T, Kim JB, Yun TJ, et al. Applications of three-dimensional printing in cardiovascular surgery: a case-based review. Cardiovasc Imaging Asia 2018;2:166-175 https://doi.org/10.22468/cvia.2018.00199
- Yoo JS, Kim YJ, Kim SH, Choi SH. Study on genipin: a new alternative natural crosslinking agent for fixing heterograft tissue. Korean J Thorac Cardiovasc Surg 2011;44:197-207 https://doi.org/10.5090/kjtcs.2011.44.3.197
- Valverde I, Gomez G, Gonzalez A, Suarez-Mejias C, Adsuar A, Coserria JF, et al. Three-dimensional patient-specific cardiac model for surgical planning in Nikaidoh procedure. Cardiol Young 2015;25:698-704 https://doi.org/10.1017/S1047951114000742
- Fann JI, Calhoon JH, Carpenter AJ, Merrill WH, Brown JW, Poston RS, et al. Simulation in coronary artery anastomosis early in cardiothoracic surgical residency training: the Boot Camp experience. J Thorac Cardiovasc Surg 2010;139:1275-1281 https://doi.org/10.1016/j.jtcvs.2009.08.045
- Fann JI, Feins RH, Hicks GL Jr, Nesbitt JC, Hammon JW, Crawford FA Jr; Senior Tour in Cardiothoracic Surgery. Evaluation of simulation training in cardiothoracic surgery: the Senior Tour perspective. J Thorac Cardiovasc Surg 2012;143:264-272 https://doi.org/10.1016/j.jtcvs.2011.10.013
- Oropallo W, Piegl LA. Ten challenges in 3d printing. Eng Comput 2016;32:135-148 https://doi.org/10.1007/s00366-015-0407-0
- Leigh SJ, Bradley RJ, Purssell CP, Billson DR, Hutchins DA. A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One 2012;7:e49365