Structural Monitoring and Maintenance

  • 제8권2호
  • /
  • Pages.167-186
  • /
  • 2021
  • /
  • 2288-6605(pISSN)
  • /
  • 2288-6613(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Unscented Kalman filter approach for tracking physical and dynamic properties of structures: Validation for multi-story buildings under seismic excitation

  • Gaviria, Carlos A. (Civil Engineering Program, Facultad de Estudios a Distancia, Universidad Militar Nueva Granada) ;
  • Montejo, Luis A. (Department of Engineering Sciences and Materials, University of Puerto Rico at Mayaguez)
  • 투고 : 2020.10.16
  • 심사 : 2021.05.21
  • 발행 : 2021.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

An improved unscented Kalman filter approach is implemented to estimate induced displacements and changes in structural properties (stiffness, frequencies and damping) during the forced dynamic response of multistory buildings to seismic excitations. The methodology is validated using a fiber-based nonlinear model of a 4-story 4-bays reinforced concrete (RC) frame building subjected to a set of earthquakes causing different levels of inelastic demand on the structure. The variation of the dynamic properties is successfully estimated by iterative updating the filter parameters. The estimated peak values of stiffness and damping reached during the seismic excitation agree with peak inelastic demand values and seem appropriate for detection and damage diagnosis of RC structures.

키워드

과제정보

This research is supported by the National Science Foundation Grant No. CMMI-1121146. Any opinions, findings and conclusions or recommendations expressed in this study are those of the writers and do not necessarily reflect the views of the National Science Foundation. The authors also acknowledge to the University of Puerto Rico at Mayaguez and Universidad Militar Nueva Granada.

참고문헌

  1. Aguirre, D.A., Gaviria, C.A. and Montejo, L.A. (2013), "Wavelet-based damage detection in reinforced concrete structures subjected to seismic excitations", J. Earthq. Eng., 17(8), 1103-1125. https://doi.org/10.1080/13632469.2013.804467
  2. Astroza, R. and Alessandri, A. (2019), "Effects of model uncertainty in nonlinear structural finite element model updating by numerical simulation of building structures", Struct. Control Health Monitor., 26(3), e2297. https://doi.org/10.1002/stc.2297
  3. Astroza, R., Ebrahimian, H. and Conte, J.P. (2017), "Batch and recursive Bayesian estimation methods for nonlinear structural system identification", In: Risk and Reliability Analysis: Theory and Applications, Springer, Cham, Switzerland.
  4. Astroza, R., Barrientos, N., Li, Y., Flores, E.I. and Liu, Z. (2019), "Bayesian updating of complex nonlinear FE models with high-dimensional parameter space using heterogeneous measurements and a batchrecursive approach", Eng. Struct., 201, e109724. https://doi.org/10.1016/j.engstruct.2019.109724
  5. Astroza, R., Barrientos, N., Li, Y. and Flores, E.S. (2020), "Calibration of a large nonlinear finite element model of a highway bridge with many uncertain parameters", In: Validation and Uncertainty Quantification, 3rd ed., Springer, Cham, Switzerland.
  6. Azam, S.E. and Mariani, S. (2018), "Online damage detection in structural systems via dynamic inverse analysis: A recursive Bayesian approach", Eng. Struct., 159, 28-45. https://doi.org/10.1016/j.engstruct.2017.12.031
  7. Azam, S.E., Mariani, S. and Attari, N.K. (2017), "Online damage detection via a synergy of proper orthogonal decomposition and recursive Bayesian filters", Nonlinear Dyn., 89(2), 1489-1511. https://doi.org/10.1007/s11071-017-3530-1
  8. Bocciarelli, M. and Ranzi, G (2020), "Stochastic and recursive estimation of the hygro-thermo-chemical-mechanical parameters of concrete through Monte Carlo analysis and extended Kalman filter", Struct. Multidisc. Optim., 61, 91-110. https://doi.org/10.1007/s00158-019-02347-y
  9. Consuegra, F. and Irfanoglu, A. (2008), "Variation of dynamic properties with displacement in a 3-story reinforced concrete flat plate structure", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
  10. Cheng, F.Y. (2001), Matrix Analysis of Structural Dynamics: Applications and Earthquake Engineering, Marcel Dekker Inc., New York, NY, USA.
  11. De Roeck, G. (2019), "Model-based methods of damage identification of structures under seismic excitation", In: Seismic Structural Health Monitoring, Springer, Cham, Switzerland.
  12. Gaviria, C.A. (2015), "A computational framework for structural health monitoring of reinforced concrete structures", Ph.D. Dissertation; University of Puerto Rico, Mayaguez.
  13. Gaviria, C.A. and Montejo, L.A. (2014), "Wavelet based damping identification from noise contaminated signals", Proceedings of the 10th National Conference in Earthquake Engineering, Anchorage, AL, USA, July. https://doi.org/10.4231/D3S17ST11
  14. Gaviria, C.A. and Montejo, L.A. (2016), "Output-only identification of the modal and physical properties of structures using free vibration response", Earthq. Eng. Eng. Vib., 15(3), 575-589. https://doi.org/10.1007/s11803-016-0345-x
  15. Gaviria, C.A. and Montejo, L.A. (2018), "Optimal wavelet parameters for system identification of civil engineering structures", Earthq. Spectra, 34(1), 197-216. https://doi.org/10.1193/092016EQS154M
  16. Gaviria, C.A. and Montejo, L.A. (2019), "Monitoring physical and dynamic properties of reinforced concrete structures during seismic excitations", Constr. Build. Mater., 196, 43-53. https://doi.org/10.1016/j.conbuildmat.2018.11.106
  17. Ghanem, R. and Ferro, G. (2006), "Health monitoring for strongly non-linear systems using the Ensemble Kalman filter", Struct. Control. Health Monitor., 13, 245-259. https://doi.org/10.1002/stc.139
  18. Grant, D.N., Blandon, C.A. and Priestley, M.J.N. (2005), Modeling Inelastic Response in Direct Displacement-Based Design, IUSS Press, Pavia, Italy.
  19. Haselton, C.B., Goulet, C.A., Mitrani-Reiser, J., Beck, J.L., Deierlein, G.G., Porter, K.A., Stewart, J.P. and Taciroglu, E. (2008), "An Assessment to Benchmark the Seismic Performance of a Code-Conforming Reinforced-Concrete Moment-Frame Building", Pacific Earthquake Engineering Research Center, August.
  20. Haselton, C.B., Liel, A.B., Deierlein, G.G., Dean, B.S. and Chou, J.H. (2011), "Seismic collapse safety of reinforced concrete buildings. I: Assessment of ductile moment frames", J. Struct. Eng., 137(4), 481-491. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000318
  21. He, H., Lv, Y. and Han, E. (2014), "Damage detection for continuous bridge based on static-dynamic condensation and extended Kalman filtering", Math. Probl. Eng., 7, 1-14. https://doi.org/10.1155/2014/707969
  22. He, L.X., Wu, C. and Li, J. (2019), "Post-earthquake evaluation of damage and residual performance of UHPSFRC piers based on nonlinear model updating", J. Sound Vib., 448, 53-72. https://doi.org/10.1016/j.jsv.2019.02.011
  23. Humar, J. (2012), Dynamics of Structures, 3rd ed., CRC press, Taylor & Francis Group, London, England.
  24. Julier, S.J. and Uhlmann, J.K. (1997), "A new extension of the Kalman filter to nonlinear systems", Proceedings of AeroSense 97 Conference on Photonic Quantum Computing, Orlando, FL, USA, April. https://doi.org/10.1117/12.280797
  25. Katkhuda, H., Shatarat, N. and Hyari, K. (2017), "Two-stage system identification approach for three-dimensional structural systems", Int. J. Struct. Eng., 8(2), 93-110. https://doi.org/10.1504/IJSTRUCTE.2017.084628
  26. Kuleli, M. and Nagayama, T. (2020), "A robust structural parameter estimation method using seismic response measurements", Struct. Control Health Monitor., 27(3), e2475. https://doi.org/10.1002/stc.2475
  27. Li, Y., Astroza, R., Conte, J.P. and Soto, P. (2017), "Nonlinear FE model updating and reconstruction of the response of an instrumented seismic isolated bridge to the 2010 Maule Chile earthquake", Earthq. Eng. Struct. Dyn., 46(15), 2699-2716. https://doi.org/10.1002/eqe.2925
  28. Lund, A., Dyke, S.J., Song, W. and Bilionis, I. (2019), "Global sensitivity analysis for the design of nonlinear identification experiments", Nonlinear Dyn., 98(1), 375-394. https://doi.org/10.1007/s11071-019-05199-9
  29. Lund, A., Dyke, S.J., Song, W. and Bilionis, I. (2020), "Identification of an experimental nonlinear energy sink device using the unscented Kalman filter", Mech. Syst. Sig. Process., 136, 106512. https://doi.org/10.1016/j.ymssp.2019.106512
  30. Mander, J., Priestley, M. and Park, R. (1988), "Theoretical Stress-Strain Model for Confined Concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  31. Mariani, S. and Ghisi, A. (2007), "Unscented Kalman filtering for nonlinear structural dynamics", Nonlinear Dyn., 49, 131-150. https://doi.org/10.1007/s11071-006-9118-9
  32. Masri, S.F., Caffrey, J.P., Caughey, T.K., Smyth, A.W. and Chassiakos, A.G. (2004), "Identification of the state equation in complex non-linear systems", Int. J. Non-Linear Mech., 39(7), 1111-1127. https://doi.org/10.1016/S0020-7462(03)00109-4
  33. Mohle, J. and Kunnath, S. (2006), Reinforcing Steel Material. OpenSees user's manual, July.
  34. Montejo, L.A. (2008), "Seismic behavior of reinforced concrete bridge columns at sub-freezing temperatures", Ph.D. Dissertation; North Carolina State University, Raleigh, USA.
  35. Montejo, L.A. and Kowalsky, M.J. (2007), "CUMBIA-Set of Codes for the Analysis of Reinforced Concrete Members", CFL Technical Report No. IS-07; North Carolina State University, Raleigh, USA.
  36. Montejo, L.A. and Kowalsky, M.J. (2008), "Estimation of frequency-dependent strong motion duration via wavelets and its influence on nonlinear seismic response", Comput.-Aided Civil Infrastruct. Eng., 23(4), 253-264. https://doi.org/10.1111/j.1467-8667.2007.00534.x
  37. Montejo, L.A. and Vidot-Vega, A.L. (2012), "Synchrosqueezed wavelet transform for frequency and damping identification from noisy signals", Smart Struct. Syst., Int. J., 9(5), 441-459. https://doi.org/10.12989/sss.2012.9.5.441
  38. Montejo, L.A., Gaviria, C.A. and Aguirre, D.A. (2015), "Tracking dynamic properties of civil structures while subjected to seismic excitations", Proceedings of the 11th Canadian Conference on Earthquake Engineering, Victoria, Canada, July.
  39. Murillo, M.J., Gaviria, C.A., Cantillo, Y.A. and Acosta, C.A. (2019), "A low-cost approach to monitoring the structural health of pedestrian bridges", Revista Espacios, 40(27), 14-23.
  40. Priestley, M., Calvi, G. and Kowalsky, M. (2007), Direct Displacement-Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
  41. Qiu, Q. and Lau, D. (2021), "Defect detection of FRP-bonded civil structures under vehicle-induced airborne noise", Mech. Syst. Sig. Process., 146, 1069. https://doi.org/10.1016/j.ymssp.2020.106992
  42. Quinones, M.M., Montejo, L.A. and Jang, S. (2015), "Experimental and numerical evaluation of wavelet based damage detection methodologies", Int. J. Adv. Struct. Eng., 7(1), 69-80. https://doi.org/10.1007/s40091-015-0084-7
  43. Ramirez, R.I. and Montejo, L.A. (2015), "On the identification of damping from non-stationary free decay signals using modern signal processing technique", Int. J. Adv. Struct. Eng., 7(3), 321-328. https://doi.org/10.1007/s40091-015-0096-3
  44. Roohi, M., Hernandez, E.M. and Rosowsky, D. (2021), "Reconstructing Element-by-Element Dissipated Hysteretic Energy in Instrumented Buildings: Application to the Van Nuys Hotel Testbed", J. Eng. Mech., 147(1), 04020141. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001864
  45. Scott, M. and Fenves, G. (2006), "Plastic Hinge Integration Methods for Force-Based Beam-Column Elements", J. Struct. Eng., 132(2), 244-252. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(244)
  46. Sen, S., Criniere, A., Mevel, L., Cerou, F. and Dumoulin, J. (2018), "Seismic-induced damage detection through parallel force and parameter estimation using an improved interacting Particle-Kalman filter", Mech. Syst. Sig. Process., 110, 231-247. https://doi.org/10.1016/j.ymssp.2018.03.016
  47. Song, W. and Dyke, S. (2014), "Real-time dynamic model updating of a hysteretic structural system", J. Struct. Eng., 140(3), 201-214. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000857
  48. Turek, M. and Ventura, C.E. (2007), "Calibrated vibration simulations for design of SHM systems", In: IMAC XXV: Conference & Exposition on Structural Dynamics, Orlando, FL, USA, February.
  49. Wan, Z., Wang, T., Li, S. and Zhang, Z. (2018), "A modified particle filter for parameter identification with unknown inputs", Struct. Control Health Monitor., 25(12), e2268. https://doi.org/10.1002/stc.2268
  50. Wu, B. and Wang, T. (2014), "Model updating with constrained unscented Kalman filter for hybrid testing", Smart Struct. Syst., Int. J., 14(6), 1105-1129. https://doi.org/10.12989/sss.2014.14.6.1105
  51. Yazdanpanah, O., Mohebi, B. and Yakhchalian, M. (2020), "Selection of optimal wavelet-based damage-sensitive feature for seismic damage diagnosis", Measurement, 154, 107447. https://doi.org/10.1016/j.measurement.2019.107447