DOI QR코드

DOI QR Code

Computational method in database-assisted design for wind engineering with varying performance objectives

  • Merhi, Ali (Department of Civil and Environmental Engineering, Rensselaer Polytechnic Institute) ;
  • Letchford, Chris W. (Department of Civil and Environmental Engineering, Rensselaer Polytechnic Institute)
  • 투고 : 2020.11.26
  • 심사 : 2021.04.24
  • 발행 : 2021.05.25

초록

The concept of Performance objective assessment is extended to wind engineering. This approach applies using the Database-Assisted Design technique, relying on the aerodynamic database provided by the National Institute of Standards and Technology (NIST). A structural model of a low-rise building is analyzed to obtain influence coefficients for internal forces and displacements. Combining these coefficients with time histories of pressure coefficients on the envelope produces time histories of load effects on the structure, for example knee and ridge bending moments, and eave lateral drift. The peak values of such effects are represented by an extreme-value Type I Distribution, which allows the estimation of the gust wind speed leading to the mean hourly extreme loading that cause specific performance objective compromises. Firstly a fully correlated wind field over large tributary areas is assumed and then relaxed to utilize the denser pressure tap data available but with considerably more computational effort. The performance objectives are determined in accordance with the limit state load combinations given in the ASCE 7-16 provisions, particularly the Load and Resistance Factor Design (LRFD) method. The procedure is then repeated for several wind directions and different dominant opening scenarios to determine the cases that produce performance objective criteria. Comparisons with two approaches in ASCE 7 are made.

키워드

과제정보

The first author is grateful for the financial support provided by the department of Civil and Environmental Engineering at Rensselaer Polytechnic Institute.

참고문헌

  1. ASCE (2016), Minimum Design Loads and Associated Criteria for Buildings and Other Structures, American Society of Civil Engineers, Reston, VA, U.S.A.
  2. ASCE (2019), Prestandard for Performance-Based Wind Design, American Society of Civil Engineers, Reston, VA, U.S.A.
  3. Bezabeh, M.A., Bitsuamlak, G.T. and Tesfamariam, S. (2020), "Performance-based wind design of tall buildings: Concepts, frameworks, and opportunities", Wind Struct., 31(2), 103-142. https://doi.org/10.12989/was.2020.31.2.103.
  4. Bodhinayake, G.G., Ginger, J.D. and Henderson, D.J. (2020), "Correlation of internal and external pressures and net pressure factors for cladding design", Wind Struct., 30(3), 219-229. https://doi.org/10.12989/was.2020.30.3.219.
  5. Ciampoli, M., Petrini, F. and Augusti, G. (2011), "Performance-based wind engineering: towards a general procedure", Struct. Safety, 33(6), 367-378. https://doi.org/10.1016/j.strusafe.2011.07.001.
  6. Duthinh, D. and Fritz, W.P. (2007), "Safety evaluation of low-rise steel structures under wind loads by nonlinear database-assisted technique", J. Struct. Eng., 133(4), 587-594. https://doi.org/10.1061/(ASCE)07339445(2007)133:4(587).
  7. Galambos, T.V. and Ellingwood, B. (1986), "Serviceability limit states: deflection", J. Struct. Eng., 112(1), 67-84. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:1(67).
  8. Ginger, J.D. and Letchford, C.W. (1999), "Net pressures on a low-rise full-scale building", J. Wind Eng. Ind. Aerod., 83(1-3), 239-250. https://doi.org/10.1016/S0167-6105(99)00075-6.
  9. Ginger, J.D., Holmes, J.D. and Kim, P.Y. (2010), "Variation of internal pressure with varying sizes of dominant openings and volumes", J. Struct. Eng., 136(10), 1319-1326. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000225.
  10. Griffis, L.G. (1993), "Serviceability limit states under wind load", Eng. J., 30(1), 1-16. https://doi.org/10.2307/805407
  11. Gringorten, I.I. (1963), "A plotting rule for extreme probability paper", J. Geophys. Res., 68(3), 813-814. https://doi.org/10.1029/JZ068i003p00813.
  12. Guha, T.K., Sharma, R.N. and Richards, P.J. (2013), "Wind induced internal pressure overshoot in buildings with opening", Wind Struct., 16(1), 1-23. https://doi.org/10.12989/was.2013.16.1.001.
  13. Gumbel, E. (1962), "Statistical theory of extreme values", JORBEL-Belgian J. Operations Res., Statistics, Comput. Sci., 3(2), 3-11.
  14. Habte, F., Chowdhury, A.G. and Zisis, I. (2017), "Effect of wind-induced internal pressure on local frame forces of low-rise buildings", Eng. Struct., 143, 455-468. https://doi.org/10.1016/j.engstruct.2017.04.039.
  15. Ho, T.C.E., Surry, D., Morrish, D. and Kopp, G.A. (2005), "The UWO contribution to the NIST aerodynamic database for wind loads on low buildings: Part 1. Archiving format and basic aerodynamic data", J. Wind Eng. Ind. Aerod., 93(1), 1-30. https://doi.org/10.1016/j.jweia.2004.07.006.
  16. Humphreys, M.T., Ginger, J.D. and Henderson, D.J. (2017), "Internal pressure fluctuations in large open plan buildings", Proceedings of the 9th Asia-Pacific Conference on Wind Engineering, Auckland, New Zealand, December.
  17. Jang, S., Lu, L.W., Sadek, F. and Simiu, E. (2002), "Database-assisted wind load capacity estimates for low-rise steel frames", J. Struct. Eng., 128(12), 1594-1603. https://doi.org/10.1061/(ASCE)07339445(2002)128:12(1594).
  18. Karava, P. and Stathopoulos, T. (2012), "Wind-induced internal pressures in buildings with large facade openings", J. Eng. Mech., 138(4), 358-370. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000296.
  19. Kopp, G.A., Oh, J.H. and Inculet, D.R. (2008), "Wind-induced internal pressures in houses", J. Struct. Eng., 134(7), 1129-1138. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1129).
  20. Kwon, D.K., Spence, S.M. and Kareem, A. (2015), "Performance evaluation of database-enabled design frameworks for the preliminary design of tall buildings", J. Struct. Eng., 141(10), 04014242. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001229.
  21. Lin, J. and Surry, D. (1997), "Simultaneous Time Series of Pressures on the Envelope of Two Large Low-Rise Buildings", Research Report BLWTL-SS7-1997, Department of Civil and Environmental Engineering, Western University, London, Ontario, Canada.
  22. Main, J.A. and Fritz, W.P. (2006), Database-Assisted Design for Wind: Concepts, Software, and Examples for Rigid and Flexible Buildings. National Institute of Standards and Technology, Technology Administration, US Department of Commerce.
  23. Mehta, K.C., Cheshire, R.H. and McDonald, J.R. (1992), "Wind resistance categorization of buildings for insurance", J. Wind Eng. Ind. Aerod., 44(1-3), 2617-2628. https://doi.org/10.1016/0167-6105(92)90053-D.
  24. Oh, J.H., Kopp, G.A. and Inculet, D.R. (2007), "The UWO contribution to the NIST aerodynamic database for wind loads on low buildings: Part 3. Internal pressures", J. Wind Eng. Ind. Aerod., 95(8), 755-779. https://doi.org/10.1016/j.jweia.2007.01.007.
  25. Pan, F., Cai, C.S. and Zhang, W. (2013), Wind-induced internal pressures of buildings with multiple openings", J. Eng. Mech., 139(3), 376-385. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000464.
  26. Pierre, L.S., Kopp, G.A., Surry, D. and Ho, T.C.E. (2005), "The UWO contribution to the NIST aerodynamic database for wind loads on low buildings: Part 2. Comparison of data with wind load provisions", J. Wind Eng. Ind. Aerod., 93(1), 31-59. https://doi.org/10.1016/j.jweia.2004.07.007.
  27. Rigato, A., Chang, P. and Simiu, E. (2001), "Database-assisted design, standardization, and wind direction effects", J. Struct. Eng., 127(8), 855-860. https://doi.org/10.1061/(ASCE)07339445(2001)127:8(855).
  28. Tecle, A.S., Bitsuamlak, G.T. and Aly, A.M. (2013), "Internal pressure in a low-rise building with existing envelope openings and sudden breaching", Wind Struct., 16(1), 25-46. https://doi.org/10.12989/was.2013.16.1.025.
  29. Vulcraft. (2018), Steel Roof and Floor Deck, NUCOR, Charlotte, North Carolina, USA.
  30. Wang, J. and Kopp, G. (2019), "Comparisons of wind tunnel data with the wind load provisions of ASCE 7-16 for low-rise buildings", Proceedings of the 15th International Conference of Wind Engineering, Beijing, China, September.
  31. Xu, H. and Lou, W. (2017), "Combined effects of internal and external pressures for a building with wall openings", Proceedings of the 9th Asia-Pacific conference on wind engineering, Auckland, New Zealand, December.
  32. Yau, S.C. (2011), "Wind Hazard Risk Assessment and Management for Structures", Ph.D. Dissertation, Princeton University, New Jersey.