Journal of Convergence for Information Technology (융합정보논문지)

Convergence Society for SMB (중소기업융합학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Technological Priorities of Manufacturing and Service Companies for Response to the 4th Industrial Revolution and Transformation into a Smart Company

4차 산업혁명 대응과 스마트 기업으로의 변화를 위한 제조 및 서비스 기업의 기술적용 우선순위에 대한 연구

  • Park, Chan-Kwon (Institute of Construction Environment Energy Convergence Technology, Kyungpook Nat'l University) ;
  • Seo, Yeong-Bok (Department of General Education, Gimcheon University)
  • 박찬권 (경북대학교 건설환경에너지융합기술원) ;
  • 서영복 (김천대학교 교양학과)
  • Received : 2020.10.25
  • Accepted : 2021.04.20
  • Published : 2021.04.28
Download PDF
⟨ Previous Next ⟩

Abstract

This study is to investigate, using AHP, what technologies should be applied first to Korean SMEs in order to respond to the 4th industrial revolution and change to a smart enterprise. To this end, technologies related to the 4th industrial revolution and smart factory are synthesized, and the classification criteria of Dae-Hoon Kim et al. (2019) are applied, but additional opinions of experts are collected and related technologies are converted to artificial intelligence (AI), Big Data, and Cloud Computing. As a base technology, mobile, Internet of Things (IoT), block chain as hyper-connected technology, unmanned transportation (autonomous driving), robot, 3D printing, drone as a convergence technology, smart manufacturing and logistics, smart healthcare, smart transportation and smart finance were classified as smart industrial technologies. As a result of confirming the priorities for technical use by AHP analysis and calculating the total weight, manufacturing companies have a high ranking in mobile, artificial intelligence (AI), big data, and robots, while service companies are in big data and robots, artificial intelligence (AI), and smart healthcare are ranked high, and in all companies, it is in the order of big data, artificial intelligence (AI), robot, and mobile. Through this study, it was clearly identified which technologies should be applied first in order to respond to the 4th industrial revolution and change to a smart company.

본 연구는 우리나라 중소기업들에게 4차 산업혁명 대응과 스마트 기업으로의 변화를 위해서는 어떠한 기술들을 우선적으로 적용하여야 하는가에 대한 내용을 AHP를 활용하여 규명하는 것이다. 이를 위하여 4차 산업혁명 관련 기술들을 종합하고, 김대훈 외(2019)의 분류기준을 준용하지만 전문가들의 의견을 추가로 수렴하여 관련 기술들을 분류하였다. 인공지능(AI), Big Data, Cloud Computing을 디지털 기반기술로, 모바일, 사물인터넷(IoT), Block Chain을 초연결 기술로, 무인운송(자율주행), 로봇(Robot), 3D 프린팅, 드론을 융합기술로, 스마트 제조 및 물류, 스마트 헬스케어, 스마트 교통, 스마트 금융을 스마트 산업기술로 구분하였다. AHP 분석과 종합가중치를 계산하는 방식으로 기술적용 우선순위를 확인한 결과 제조기업은 모바일, 인공지능(AI), Big Data, 로봇(Robot)의 순위가 높으며, 서비스기업은 Big Data, 로봇(Robot), 인공지능(AI), 스마트 헬스케어의 순위가 높고 전체기업에서는 Big Data, 인공지능(AI), 로봇(Robot), 모바일의 순서이다. 본 연구를 통해 4차 산업혁명 대응과 스마트 기업으로의 변화를 위해서는 어떠한 기술들을 우선적으로 적용하여야 하는가를 명확하게 규명하였다.

Keywords

References

  1. M. Colin, R. Galindo & O. Hernandez. (2015). Information and Communication Technology as a Key Strategic for Efficient Supply Chain Management in Manufacturing SMEs. Peocedia Computer Science, 55, 833-842. DOI : 10.1016/0022-2496(83)90028-7
  2. M. Maslaric, S. Nikolicic & D. Mircetic. (2016). Logistics Response to the Industry 4.0: The Physical Internet. Open Engineering, 6(1), 511-517. DOI : 10.1515/eng-2016-0073
  3. H. B. Na, H. S. Son, J. W. Seo & I. K. Hwang. (2018). A Study on Process / Facility Methodology for SME Smart Factory. Journal of the Korean institute of Plant Engineering, 23(1), 3-13.
  4. Korea Smart Manufacturing Office. (2020). Smart Factory Business Management System. (Online). https://smart-factory.kr
  5. M. Jung & J. B. Oh. (2017). Corporate Perception and Implications for the 4th Industrial Revolution. VIP Report(17-18), 691, 1-12.
  6. S. M. Choe, J. H. An & S. S. Moon. (2018). A Study on the Perspective and Coping Measure of Small and Medium-Sized Enterprises in Ulsan City for The Fourth Industrial Revolution. Journal of Regional Studies, 26(2), 1-24. DOI : 10.22921/jrs.2018.26.2.001
  7. C. B. Lee, J. H. Noh & J. H. Kim. (2017). A Study on the Perception of the Impact of Fourth Industrial Revolution on the Performance of Logistics Management. KOREA LOGISTICS REVIEW, 27(5), 1-12. DOI : 10.17825/klr.2017.27.5.1
  8. H. S. Khan. (2018). The Countermeasures of Domestic Manufacturing in the 4th Industrial Revolution Era : Comparative Analysis on German Manufacturing Industries. Journal of Product Research, 36(3), 55-66.. DOI : 10.36345/kacst.2018.36.3.007
  9. Y. Y. Kim & Y. S. Park. (2017). Fourth Industrial Revolution and SME Supporting Policy. Journal of Korea Technology Innovation Society, 20(2), 387-405.
  10. Y. I. Bae & H. R. Shin. (2017). A Study on Policy Direction for Establishing the Foundation of the Fourth Industrial Revolution in Gyeonggi-Do. Policy Research 2017-19, 1-104.
  11. K. H. YU & J. K. Doh. (2017). A Study on the Efficient Export Support Policy in Response to the Fourth Industrial Revolution. The e-Business Studies, 18(2), 273-286. DOI : 10.20462/TeBS.2017.04.18.2.273
  12. S. C. Lee. (2018). Study of Strategy to Develop Manufacturing Industry in the Gumi National Industrial Complex in the Age of the Fourth Industrial Revolution. Korean Public Administration Quarterly, 30(2), 437-464. DOI : 10.21888/KPAQ.2018.6.30.2.437
  13. N. K. Chung & D. S. Kim. (2018). Strategic Response of Small and Medium-sized Automobile Part Industry for the 4th Industrial Revolution Era. Ordo Economics Journal, 21(1), 45-63. https://doi.org/10.20436/oej.21.1.045
  14. Y. H. Choi & S. H. Choi. (2017). A Study on the Factors Influencing the Competitiveness of Small and Medium Companies Applied with Smart Factory System. Information Systems Review, 19(2), 95-113. DOI : 10.14329/isr.2017.19.2.095
  15. H. J. Nam & E. H. Kim. (2018). Classification of Logistics Industry and Countermeasures in the 4th Industrial Revolution Era. Korean Management Consulting Review, 18(3), 275-286.
  16. J. R. Kim & S. J. Lee. (2020). Factors Affecting Technology Acceptance of Smart Factory. Journal of Information Technology Applications & Management, 27(1), 75-95. DOI : 10.21219/jitam.2020.27.1.075
  17. C. K. Park & C. B. Kim. (2019). A Study on Priority and Weight of Technology Applied by Korean Firms for the Response to the 4th Industrial Revolution Using AHP. Korean Business Education Review, 34(6), 539-559. DOI : 10.23839/kabe.2019.34.6.4.539
  18. J. H. Suh. (2017). How to Recognize and Respond to the 4th Industrial Revolution. Kukto, 424, 2-4.
  19. H. Lasi, P. Fettke & M. Hoffmann. (2014). Industry 4.0. Business & Information Systems Engineering, 6(4), 239-242. DOI : 10.1007/s12599-014-0334-4
  20. T. Stock & G. Seliger. (2016). Opportunities of Sustainable Manufacturing in Industry 4.0. Procedia CIRP, 40, 536-541. DOI : 10.1016/j.procir.2016.01.129
  21. H. G. Andreas & F. C. Kleemann. (2016). The Impact of Industry 4.0 on Procurement and Supply Management: A Conceptual and Qualitative Analysis. International Journal of Business and Management Invention, 5(6), 55-66.
  22. R. Geissbauer, J. Veddso & S. Schrauf. (2016). A Strategist's Guide to Industry 4.0. Strategy+Business, Summer 2016. 83
  23. E. Hofmann & M. Ritch. (2017). Industry 4.0 and The Current Status as well as Future Prospects on Logistics. Computers in Industry, 89, 23-34. DOI : 10.1016/j.compind.2017.04.002
  24. J. Fredett, R. Marom, K. Steinert & L. Witters (2012). The Promise and Peril of Hyperconnectivity for Organizations and Society. The Global Information Technology Report.
  25. C. W. Y. Wong, K. H. Lai & E. W. T. Ngai. (2009). The Role of Supplier Operational Adaptation on the Performance of IT-enabled Transport Logistics Under Environmental Uncertainty. International Journal of Production & Economics, 122(1), 47-55. DOI : 10.1016/j.ijpe.2008.12.023
  26. I. Harris, Y. Wang & H. Wang (2015). ICT in Multimodal Transport and Technological Trends: Unleashing Potential for the Future. International Journal of Production & Economics, 159, 88-103. DOI : 10.1016/j.ijpe.2014.09.005
  27. M, Harmann, T. Pentek & B. Otto. (2015). Design Principles for Industrie 4.0 Scenarics: A Literature Review, in System Science(HICSS), 49th Hawaii International Conference, 3928-3932.
  28. J. Rifkin. (2016). The 2016 World Economic Forum Misfires with Its Fourth Industrial Revolution Theme, Industry Week.
  29. Intellectual Property Office. (2020). New Patent Classification System Related to the 4th Industrial Revolution, (Online). http://www.kipo.go.kr
  30. D. H. Kim, H. B. Jang, Y. I. Park & K. L. Yang. (2019). The Fourth Industrial Revolution. Seoul : Pakyoungsa.
  31. J. J. Oh & S. J. Choi. (2017). Development of PLC-based Fieldbus Educational Equipment and Curriculum for building Smart Factory. Journal of Practical Engineering Education, 9(1), 49-56. DOI : 10.14702/JPEE.2017.049
  32. S. J. Lee, B. K. Lim, K. R. Park & J. C. Park. (2018). Smart Factory Operation and Strategy. Seoul : Hanol Publishing House.
  33. H. B. Na & I. K. Hwang. (2018). The Method of Improvement through Current Analysis Current Situation of Smart Factory in Small to Medium Sized Industries. Journal of the Korean institute of Plant Engineering, 23(3), 59-69.
  34. Ministry of SMEs and Startups. (2020). Statistics. (Online). https://www.mss.go.kr
  35. W. J. Jang, S. I. Cho, S. S. Kim & G. Y. Gim. (2018). A Study on the Implementation of Big Data Infrastructure in Smart Factory. Asia-pacific Journal of Multimedia Service Convergent with Art Humanities, and Sociology, 8(10), 11-23. DOI : 10.35873/ajmahs.2018.8.10.002
  36. S. C. Oh & Y. H. Ahn. (2019). A Study on the Diagnosis Measurement for the Smart Factory Level in the 4th Industrial Revolution. KOREA LOGISTICS REVIEW, 29(6), 149-162.
  37. S. G. Park & M. L. Lee. (2016). Smart Factory for Small Company. Electronics and Telecommunications Trends, 31(6), 39-47.
  38. J. H. Jung & D. H. An. (2019). Development of Remote Control System based on CNC Cutting Machine for Gradual Construction of Smart Factory Environment. KIPS Transactions on Computer and Communication Systems, 8(12), 297-304. DOI : 10.37451/KTCCS.2019.8.12.297
  39. J. H. Oh & J. D. Kim. (2019). A Study on Strategic Utilization of Smart Factory: Effects of Building Purposes and Contents on Continuous Utilization. Asia Pacific Journal of Small Business, 41(4), 1-36. DOI : 10.36491/APJSB.41.4.1
  40. J. S. Park & K. S. Kang. (2017). Strategies of Smart Factory Building and Application of Small & Medium-Sized Manufacturing Enterprises. Journal of Korea Safety Management & Science, 19(1), 227-236. DOI : 10.12812/ksms.2017.19.1.227
  41. Y. H. Kang. (2017). Construction of E134 enabled EDA system for smart factory. JOURNAL OF PLATFORM TECHNOLOGY, 5(3), 40-47.
  42. J. S. Kho & J. P. Jeong. (2019). Design and Implementation of Smart Factory MES Model Based on Process Visualizationa for Small and Medium Business in Korea. The Journal of The Institute of Internet, Broadcasting and Communication (IIBC), 19(5), 135-141. DOI : 10.7236/JIIBC.2019.19.5.135
  43. B. E. So & S. S. Shin. (2017). The Built of Smart Factory Using Sensors and Virtual Process Design. The Journal of the Korea Institute of Electronic Communication Sciences, 12(6), 1071-1080. DOI : 10.13067/JKIECS.2017.12.6.1071
  44. Y. M. Lee, W. B. Lee & S. H. Lee. (2019). Development of Embedded Board for Construction of Smart Factory, 23(3), 1092-1095. DOI : 10.7471/ikeee.2019.23.3.1092
  45. J. W. Lim, D. H. Jo, S. Y. Lee, H. J. Park & J. W. Park. (2017). A Case Study for the Smart Factory Application in the Manufacturing Industry. Korean Journal of Business Administration, 30(9), 1609-1630. DOI : 10.18032/kaaba.2017.30.9.1609
  46. Y. S. Jeong. (2018). Linking Algorithm between IoT devices for smart factory environment of SMEs. Journal of Convergence for Information Technology, 8(2), 233-238. DOI : 10.22156/CS4SMB.2018.8.2.233
  47. Y. S. Jeong. (2019). A Model Design for Enhancing the Efficiency of Smart Factory for Small and Medium-Sized Businesses Based on Artificial Intelligence. Journal of Convergence for Information Technology), 9(3), 16-21. DOI : 10.22156/CS4SMB.2019.9.3.016
  48. S. Y. Kim. (2018). A Case Study of the Introduction of Smart Factory Operation Management(FOM) in the Fourth Industrial Revolution Era. Korean Computers and Accounting Review, 16(1), 43-62. DOI : 10.32956/kaoca.2018.16.1.43
  49. J. P. Park. (2017). Analysis on Success Cases of Smart Factory in Korea: Leveraging from Large, Medium, and Small Size Enterprises. Journal of Digital Convergence, 15(5), 107-115. DOI : 10.14400/JDC.2017.15.5.107
  50. J. Y. Oh & S. H. Choi. (2018). An Analysis of the Characteristics of Companies introducing Smart Factory System Using Data Mining Technique. Journal of the Korea Convergence Society, 9(5), 179-189. DOI : 10.15207/JKCS.2018.9.5.179
  51. H. J. Kim, H. Huh, J. W. Kang & J. M. Boo. (2019). A Study on Factors Influencing the Introduction of Smart Factory : Focusing on Small and Medium-sized Enterprises in Korea. Journal of the Society of Korea Industrial and Systems Engineering, 42(3), 252-261. DOI : 10.11627/jkise.2019.42.3.252
  52. J. H. Oh, J. H. Seo & J. D. Kim. (2019). The Effect of Both Employees' Attitude toward Technology Acceptance and Ease of Technology Use on Smart Factory Technology Introduction level and Manufacturing Performance. Journal of Information Technology Applications & Management, 26(2), 13-26. DOI : 10.21219/jitam.2019.26.2.013
  53. S. Barile & F. Polese. (2010). Smart Service Systems and Viable Service Systems: Applying Systems Theory to Service Science. Service Science, 2(1/2), 21-40. DOI : 10.1287/serv.2.1_2.21
  54. H. Demirkan, C. Bess, J. Spohrer, A. Rayes & D. Allen. (2015). Innovations with Smart Service Systems: Analytics, Big Data, Cognitive Assistance, and the Internet of Everything. Communications of the Association for Information Systems, 37, 733-752. DOI : 10.17705/1CAIS.03735
  55. H. J. Lee & J. Y. Lee. (2017). Smart Service System-based Architecture Design of Smart Factory. Journal of the Korea Society of Systems Engineering, 13(2), 57-64. DOI : 10.14248/JKOSSE.2016.13.2.057
  56. Y. J. Jung, H. U. Kang & S. H. Park. (2019). A Study on Critical Factor Analysis of Selection Attributes of Overseas Direct Purchase Using AHP and IPA. Korean Business Education Review, 34(3), 233-253. DOI : 10.23839/kabe.2019.34.3.233
  57. T. L. saaty. (1980). The Analytic Hierarchy Process. New York : McGraw-Hill.
  58. T. L. saaty. (1983). Priority Setting in Complex Problem. IEEE Transactions on Engineering Management, 30(3), 96-108. DOI : 10.1109/TEM.1983.6448606
  59. T. L. saaty. (1989). Decision Making Scaling, and Number Crunching. Decision Science, 20(2), 404-409. DOI : 10.1111/j.1540-5915.1989.tb01887
  60. E. Zio. (1996). On the Use of the Analytic Hierarchy Process in the Aggregation of Expert Judgment. Reliability Engineering and System Safety, 53(2), 127-138. DOI : 10.1016/0951-8320(96)00060-9
  61. R. F. Dyer, E. H. Forman & M. A. Mustafa. (1992). Decision Support for Media Selection Using the Analytic Hierarchy Process. Journal of Advertising, 21(1), 59-72. DOI : 10.1080/00913367.1992.10673360
  62. F. Zahedi. (1986). The Analytic Hierarchy Process-A Study of the Method and It's Applications. Journal on Applied Analytics, 16(4), 96-108. DOI : 10.1287/inte.16.4.96
  63. D. H. Kim, Y. J. Jung & W. I. Joh. (2018). A Study on the Characteristics of Consumers' Choice of Cosmetics in Online Shops Using AHP. Korean Business Education Review, 33(3), 387-406. DOI : 10.23839/kabe.2018.33.3.387
  64. J. Aczel & T. L. Saaty. (1983). Procedural for Synthesizing Ratio Judgement. Journal of Mathematical Psychology, 27(1), 93-102. DOI : 10.1016/0022-2496(83)90028-7
  65. T. L. Saaty & L. G. Vargas. (2001). Model, Methods, Concepts and Applications of the Analytic Hierarchy Process. Boston: Kluwer Academic Publishers.
  66. Y. Wind & T. L. Saaty. (1980). Marketing Applications of the Analytic Hierarchy Process. Management Science, 26(7), 641-745. DOI : 10.1287/mnsc.26.7.641
  67. L. G. Vargas. (1990). An Overview of the Analytic Hierarchy Process and its Applications. European Journal of Operation Research, 48(1), 2-8. DOI : 10.1016/0377-2217(90)90056-H
  68. P. Harker & L. G. Vargas. (1987). Theory of Ratio Scale Estimation: Saaty's Analytic Hierarchy Process. Management Science. 33(11), 1383-1403. DOI : 10.1287/mnsc.33.11.1383
  69. K. I. Kim. (2014). A study on the Plan for Consilidating the IT Convergency Capabilities of SMB. Journal of Convergence for Information Technology, 4(3), 41-46. DOI : 10.22156/CS4SMB.2014.4.3.41
  70. J. Y. Lee & K. I. Kim. (2018). An Exploratory Study to Respond to Industry 4.0 Dysfunction in Small and Medium Manufacturers. Journal of Convergence for Information Technology, 8(3), 169-174. DOI : 10.22156/CS4SMB.2018.8.3.169
  71. M. L. Fisher. (1997). What is the right supply chain for your product?. Harvard Business Review, 75(2), 105-116.