DOI QR코드

DOI QR Code

구현방식이 용이한 텍스타일 터치센서 개발 및 구조적 설계

Development and Structural Design of Textile Touch Sensor Easily Implemented

  • 김지선 (숭실대학교 스마트웨어러블공학과) ;
  • 박진희 (숭실대학교 유기신소재.파이버공학과) ;
  • 김주용 (숭실대학교 유기신소재.파이버공학과)
  • Kim, Ji-seon (Dept. of Smart Wearables Engineering, Soongsil University) ;
  • Park, Jinhee (Dept. of Organic Materials & Fiber Engneering, Soongsil University) ;
  • Kim, Jooyoung (Dept. of Organic Materials & Fiber Engneering, Soongsil University)
  • 투고 : 2020.10.21
  • 심사 : 2020.12.07
  • 발행 : 2021.02.28

초록

This study presents and develops a textile type touch sensor structural design that is easy to implement. First, the design of the touch sensor circuit finds the size of the switch with the easiest finger contact and selects a structure with a long circuit with the lowest resistance value. An experiment is performed on a change in an electrostatic capacitance value that accompanies the distance on the electrode and the magnitude of the electrode area of the structure; however, the structure having the distance on the electrode and the large electrode area shows the best resistance change. The laundry assessment was conducted three times at a time and ten times at a time with an average standard deviation less than one ohm, with little change in resistance. Consequently, there were no problems with durability and performance for laundry. Finally, in the bending evaluation, the difference in resistance can be seen between 1-2 ohms and was developed as a smart wearable in the future; in addition, there was no problem as a difference in resistance can be seen between 1 and 2 ohms.

키워드

참고문헌

  1. Badger, P. (n.d.). Capacitive sensing library. The Arduino Playground. Retrieved from https://playground.arduino.cc/Main/CapacitiveSensor/
  2. International Organization for Standardization. (2020, September 8). ISO/DIS 2313-1(en) Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen. ISO. Retrieved from https://www.iso.org/obp/ui/#iso:std:iso:2313:-1:dis:ed-1:v1:en
  3. Jang, E., & Cho, G. (2018). Development of PU nanoweb based electroconductive textiles and exploration of applicability as a transmission line for smart clothing. Fashion & Textile Research Journal, 20(1), 101-107. doi:10.5805/SFTI.2018.20.1.101
  4. Jang. E., & Cho, G. (2019). The classification and investigation of smart textile sensors for wearable vital signs monitoring. Fashion & Textiles Research Journal, 21(6), 697-707. doi:10.5805/SFTI.2019.21.6.697
  5. Kim, S. r. (2015). All-fabric temperature regulation smart clothing system for interacting user with the textile switches and the mobile app (Unpublished master's thesis). Sangmyung University, Seoul.
  6. Korean Agency for Technology and Standards. (2016, December 28). KS K ISO6330 Textiles-Domestic washing and drying procedures for textile testing. Korean Standards & Certifications. Retrieved from https://standard.go.kr/KSCI/standardIntro/getStandardSearchView.do?menuId=919&topMenuId=502&upperMenuId=503&ksNo=KSKISO6330&tmprKsNo=KSKISO6330&reformNo=04
  7. Lee, K.-Y. (2013). 터치센서 IC 설계 동향 [Touch sensor IC design trend]. The Magazine of the IEEK, 40(6), 86-93.
  8. PHil. (2016, May 24). 구글 자카드와 리바이스 커뮤터, 스마트의류 플랫폼의 서막을 열다 [Google jacquard, Levi's commuter, opening the smartwear platform]. Tech G. Retrieved from http://techg.kr/15013/
  9. Roh, J.-S., & Mann, Y. (2011). 금속복합사의 자수를 이용한 텍스타일 스위치 시스템 [Textile switch system using the embroidery of metal composite yarn]. Proceedings of the Korean Society of Clothing and Textiles, Spring Conference, Korea, 119.
  10. Zaman, S. u., Tao, X., Cochrane, C., & Koncar, V. (2019). Launderability of conductive polymer yarns used for connections of e-textile modules: Mechanical stresses. Fibers and Polymers, 20(11), 2355-2366. doi:10.1007/s12221-019-9325-x