DOI QR코드

DOI QR Code

전도성사의 심 퍼커와 봉합강도 평가

Evaluation of Seam Puckering and Seam Strength for Conductive Threads

  • Lee, Hyojeong (Dept. of Fashion Design and Merchandising, Kongju National University) ;
  • Park, Sunhee (Dept. of Clothing and Textiles, Chungnam National University) ;
  • Lee, Yejin (Dept. of Clothing and Textiles, Chungnam National University)
  • 투고 : 2020.05.19
  • 심사 : 2020.07.29
  • 발행 : 2021.02.28

초록

Seam puckering and the seam strength of conductive threads used to produce smart clothing were analyzed according to stitching methods and fabrics. Samples were prepared in a lock stitch and zigzag stitch on plain woven and jersey knit fabric, using one type of polyester sewing thread and three types of commercial conductive threads that consisted of two types of stainless-steel conductive threads (TST and MST) and one type of silver conductive thread (SSV). Seam pucker percentages, shapes, and seam strength were measured. On plain woven fabric as well as jersey knit fabric, three-ply TST and MST showed a higher SP percentage compared to a polyester sewing thread. Meanwhile, single-ply SSV showed the lowest SP percentage. In addition, the SP percentage of the zigzag stitch decreased along the weft and course directions of the fabric, and decreased significantly as the number of fabric layers increased. Moreover, there was a marked tendency for a higher SP percentage in jersey knit fabric compared to plain woven fabric, and the two-dimensional cross-section waveforms of stitches obtained using three-dimensional data that showed increased irregular waveforms and peaks in the zigzag stitch. There were no correlations between seam strength and tensile strength.

키워드

참고문헌

  1. American Association of Textile Chemists and Colorists. (2018). AATCC TM88B-2018t Seam smoothness in fabrics after home laundering. AATCC. Retrieved from https://members.aatcc.org/store/tm88b/504/
  2. American Society for Testing and Materials. (2018). ASTM D 1683 / D1683M-17 Standard test method for failure in sewn seams of woven fabrics. ASTM International. Retrieved from https://www.astm.org/Standards/D1683.htm
  3. Brad, R., HAloiu, E., & Brad, R. (2014). Seam puckering objective evaluation method for sewing process. Annals of the University of Oradea: Fascicle of Textiles, Leatherwork, XV(1), 23-28.
  4. Brown, P., & Rice, J. (2013). Ready-to-wear apparel analysis (4th ed.). London: Pearson
  5. Dobilaite, V., & Juciene, M. (2006). The influence of mechanical properties of sewing threads on seam pucker. International Journal of Clothing Science and Technology, 18(5), 335-345. doi:10.1108/09556220610685276
  6. Dobilaite, V., & Juciene, M. (2007). Influence of sewing machine parameters on seam pucker. Tekstil, 56(5), 286-292.
  7. Hati, S., & Das, B. R. (2011). Seam pucker in apparels: A critical review of evaluation methods. Asian Journal of Textile, 1(2), 60-73. doi:10.3923/ajt.2011.60.73
  8. Jung, I., & Lee, S. (2018a). Tensile and electrical property of stainless steel conductive yarn under various sewing methods. Textile Science and Engineering, 55(3), 202-210. doi:10.12772/TSE.2018.55.202
  9. Jung, I., & Lee, S. (2018b). Durability evaluation of stainless steel conductive yarn under various sewing method by repeated strain and abrasion test. Journal of the Korean Society of Clothing and Textiles, 42(3), 474-485. doi:10.5850/JKSCT.2018.42.3.474
  10. Kim, H.-A., & Kim, S.-J. (2011). Seam pucker and formability of the worsted fabrics. Fibers and Polymers, 12(8), 1099-1105. doi:10.1007/s12221-011-1099-8
  11. Lee, E., & Kim, J. (2014). A study on practical function of neoprene fabric design in wearable device for golf posture training: Focus on assistance band with Arduino/flex sensor. Journal of Fashion Business, 18(4), 1-14. doi:10.12940/jfb.2014.18.4.1
  12. Mousazadegan, F., Saharkhiz, S., & Latifi, M. (2012). Prediction of tension seam pucker formation by finite-element model. International Journal of Clothing Science and Technology, 24(2/3), 129-140. doi:10.1108/09556221211205577
  13. Ryu, J.-W., Jee, Y.-J., Kim, H.-J., & Yoon, N.-S. (2011). Basic study of weaving structure and durability for fabric-type ECG sensor design. Textile Coloration and Finishing, 23(3), 219-226. doi:10.5764/TCF.2011.23.3.219
  14. Uh, M.-K. (2013). Seam strength depending on the change of cutting direction of fine cotton fabrics. Journal of the Korea Fashion & Costume Design Association, 15(3), 33-40.
  15. Uh, M.-K., & Park, M.-J. (2005). A study on the seam strength and resistance to slippage of yarns of lining fabrics. Journal of the Korean Society for Clothing Industry, 7(4), 433-438.