Advances in nano research

  • 제10권2호
  • /
  • Pages.101-114
  • /
  • 2021
  • /
  • 2287-237X(pISSN)
  • /
  • 2287-2388(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

In-plane varying bending force effects on wave dispersion characteristics of single-layered graphene sheets

  • Cao, Yan (School of Mechatronic Engineering, Xi'an Technological University) ;
  • Selmi, Abdellatif (Department of Civil Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University) ;
  • Tohfenamarvar, Rasoul (Department of Civil Engineering, Tabriz Branch, Islamic Azad University) ;
  • Zandi, Yousef (Department of Civil Engineering, Tabriz Branch, Islamic Azad University) ;
  • Kasehchi, Ehsan (Department of Civil Engineering, Roudehen Branch, Islamic Azad University) ;
  • Assilzahed, Hamid (Institute of Research and Development, Duy Tan University)
  • 투고 : 2019.07.02
  • 심사 : 2020.10.15
  • 발행 : 2021.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

An analytical investigation has been performed on the mechanical performance of waves propagated in a Single-Layered Graphene Sheet (SLGS) when an In-plane Varying Bending (IVB) load is interacted. It has been supposed that the Graphene Sheet (GS) is located on an elastic medium. Employing a two-parameter elastic foundation, the effects of elastic substrate on the GS behavior are modeled. Besides, the kinematic equations are derived by the means of a trigonometric two-variable refined plate theory. Moreover, in order to indicate the size-dependency of the SLGS, a Nonlocal Strain Gradient Theory (NSGT) was considered. The nonlocal governing differential equations are achieved in the framework of Hamilton's Principle (HP). Also, an analytical approach was used to detect the unknowns of the final eigenvalue equation. Finally, the effects of each parameters using some dispersion charts were determined.

키워드

참고문헌

  1. Akbas, S.D. (2018), "Bending of a cracked functionally graded nanobeam", Adv. Nano Res., Int. J., 6(3), 219-242. https://doi.org/10.12989/anr.2018.6.3.219.
  2. Alabduljabbar, H., Haido, J.H., Alyousef, R., Yousif, S.T., McConnell, J., Wakil, K. and Jermsittiparsert, K. (2020), "Prediction of the flexural behavior of corroded concrete beams using combined method", Structures, 25, 1000-1008. https://doi.org/10.1016/j.istruc.2020.03.057.
  3. Alaskar, A., Alyousef, R., Alabduljabbar, H., Alrshoudi, F., Mohamed, A.M., Jermsittiparsert, K. and Ho, L.S. (2020a), "Elevated temperature resistance of concrete columns with axial loading", Adv. Concrete Constr., Int. J., 9(4), 355-365. https://doi.org/10.12989/acc.2020.9.4.355.
  4. Alaskar, A., Shah, S.N.R., Keerio, M.A., Phulpoto, J.A., Baharom, S., Assilzadeh, H., Alyousef, R., Alabduljabbar, H. and Mohamed, A.M. (2020b), "Development of Pozzolanic material from clay", Adv. Concrete Constr., Int. J., 10(4), 301-310. https://doi.org/10.12989/acc.2020.10.4.301.
  5. Alaskar, A., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020c), "Computational analysis of three dimensional steel frame structures through different stiffening members", Steel Compos. Struct., Int. J., 35(2), 187-197. https://doi.org/10.12989/scs.2020.35.2.187.
  6. Alyousef, R., Alabduljabbar, H., Mohamed, A.M., Alaskar, A., Jermsittiparsert, K. and Ho, L.S. (2020), "A model to develop the porosity of concrete as important mechanical property", Smart Struct. Syst., Int. J., 26(2), 147-156. https://doi.org/10.12989/sss.2020.26.2.147.
  7. Arani, A.G., Haghparast, E. and Zarei, H.B. (2016), "Nonlocal vibration of axially moving graphene sheet resting on orthotropic visco-Pasternak foundation under longitudinal magnetic field", Physica B Condens. Matter, 495, 35-49. https://doi.org/10.1016/j.physb.2016.04.039.
  8. Arash, B., Wang, Q. and Liew, K.M. (2012), "Wave propagation in graphene sheets with nonlocal elastic theory via finite element formulation", Comput. Methods Appl. Mech. Eng., 223, 1-9. https://doi.org/10.1016/j.cma.2012.02.002.
  9. Aydogdu, M. (2009), "A general nonlocal beam theory: Its application to nanobeam bending, buckling and vibration", Physica E Low Dimens. Syst. Nanostruct., 41(9), 1651-1655. https://doi.org/10.1016/j.physe.2009.05.014.
  10. Cai, C., Gao, X., Teng, Q., Kiran, R., Liu, J., Wei, Q. and Shi, Y. (2020a), "Hot isostatic pressing of a near α-ti alloy: Temperature optimization, microstructural evolution and mechanical performance evaluation", Mater. Sci. Eng. A, 2020, 140426. https://doi.org/10.1016/j.msea.2020.140426.
  11. Cai, C., Tey, W.S., Chen, J., Zhu, W., Liu, X., Liu, T., Zhao, L. and Zhou, K. (2020b), "Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion", J. Mater. Process. Technol., 288, 116882. https://doi.org/10.1016/j.jmatprotec.2020.116882.
  12. Cai, C., Wu, X., Liu, W., Zhu, W., Chen, H., Qiu, J.C.D., Sun, C.N., Liu, J., Wei, Q. and Shi, Y. (2020c), "Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance", J. Mater. Process. Technol., 57, 51-64. https://doi.org/10.1016/j.jmst.2020.05.004.
  13. Cao, Y., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alaskar, A., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020a), "Investigation on the monotonic behavior of the steel rack upright-beam column connection", Smart Struct. Syst., Int. J., 26(1), 103-115. https://doi.org/10.12989/sss.2020.26.1.103.
  14. Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020b), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Structures, 27, 118-127. https://doi.org/10.1016/j.istruc.2020.05.031.
  15. Cao, Y., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020c), "Application of extreme learning machine in behavior of beam to column connections", Structures, 25, 861-867. https://doi.org/10.1016/j.istruc.2020.03.058.
  16. Cao, Y., Wakil, K., Alyousef, R., Yousif, S.T., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020d), "Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations", Earthq. Struct., Int. J., 18(5), 567-580. https://doi.org/10.12989/eas.2020.18.5.567.
  17. Chen, S., Hassanzadeh-Aghdam, M. and Ansari, R. (2018). "An analytical model for elastic modulus calculation of SiC whiskerreinforced hybrid metal matrix nanocomposite containing SiC nanoparticles", J. Alloys Compd., 767, 632-641. https://doi.org/10.1016/j.jallcom.2018.07.102.
  18. Chen, C., Wang, X., Wang, Y., Yang, D., Yao, F., Zhang, W., Wang, B., Sewvandi, G.A., Yang, D. and Hu, D. (2020), "Additive manufacturing of piezoelectric materials", Adv. Func. Mater., 30(52), 2005141. https://doi.org/10.1002/adfm.202005141.
  19. Ebrahimi, F. and Salari, E. (2015), "Thermo-mechanical vibration analysis of a single-walled carbon nanotube embedded in an elastic medium based on higher-order shear deformation beam theory", J. Mech. Sci. Technol., 29(9), 3797-3803. https://doi.org/10.1007/s12206-015-0826-2.
  20. Ebrahimi, F. and Barati, M.R. (2016a), "Magneto-electro-elastic buckling analysis of nonlocal curved nanobeams", Eur. Phys. J. Plus, 131(9), 346. https://doi.org/10.1140/epjp/i2016-16346-5.
  21. Ebrahimi, F. and Barati, M.R. (2016b), "A nonlocal higher-order shear deformation beam theory for vibration analysis of size-dependent functionally graded nanobeams", Arab. J. Sci. Eng., 41(5), 1679-1690. https://doi.org/10.1007/s13369-015-1930-4.
  22. Ebrahimi, F. and Barati, M.R. (2016c), "Static stability analysis of smart magneto-electro-elastic heterogeneous nanoplates embedded in an elastic medium based on a four-variable refined plate theory", Smart Mater, Struct., 25(10), 105014. https://doi.org/10.1088/0964-1726/25/10/105014.
  23. Ebrahimi, F. and Barati, M.R. (2016d), "A unified formulation for dynamic analysis of nonlocal heterogeneous nanobeams in hygro-thermal environment", Appl. Phys. A, 122(9), 792. https://doi.org/10.1007/s00339-016-0322-2.
  24. Ebrahimi, F. and Barati, M.R. (2016e), "Vibration analysis of nonlocal beams made of functionally graded material in thermal environment", Eur. Phys. J. Plus, 131(8), 279. https://doi.org/10.1140/epjp/i2016-16279-y.
  25. Ebrahimi, F. and Hosseini, S. (2016), "Thermal effects on nonlinear vibration behavior of viscoelastic nanosize plates", J. Therm. Stress., 39(5), 606-625. https://doi.org/10.1080/01495739.2016.1160684.
  26. Ebrahimi, F. and Barati, M.R. (2017a), "Buckling analysis of smart size-dependent higher order magneto-electro-thermo-elastic functionally graded nanosize beams", J. Mech., 33(1), 23-33. https://doi.org/10.1017/jmech.2016.46.
  27. Ebrahimi, F. and Barati, M.R. (2017b), "Hygrothermal effects on vibration characteristics of viscoelastic FG nanobeams based on nonlocal strain gradient theory", Compos. Struct., 159, 433-444. https://doi.org/10.1016/j.compstruct.2016.09.092.
  28. Ebrahimi, F. and Barati, M.R. (2017c), "Vibration analysis of viscoelastic inhomogeneous nanobeams incorporating surface and thermal effects", Appl. Phys. A, 123(1), 5. https://doi.org/10.1007/s00339-016-0511-z.
  29. Ebrahimi, F. and Dabbagh, A. (2017), "Wave propagation analysis of smart rotating porous heterogeneous piezo-electric nanobeams", Eur. Phys. J. Plus, 132(4), 153. https://doi.org/10.1140/epjp/i2017-11366-3.
  30. Ebrahimi, F. and Shafiei, N. (2017), "Influence of initial shear stress on the vibration behavior of single-layered graphene sheets embedded in an elastic medium based on Reddy's higher-order shear deformation plate theory", Mech. Adv. Mater. Struct., 24(9), 761-772. https://doi.org/10.1080/15376494.2016.1196781.
  31. Ebrahimi, F. and Barati, M.R. (2018), "Effect of three-parameter viscoelastic medium on vibration behavior of temperature-dependent non-homogeneous viscoelastic nanobeams in a hygro-thermal environment", Mech. Adv. Mater. Struct., 25(5), 361-374. https://doi.org/10.1080/15376494.2016.1255831.
  32. Ebrahimi, F., Barati, M.R. and Dabbagh, A. (2016a), "Wave dispersion characteristics of axially loaded magneto-electro-elastic nanobeams", Appl. Phys. A, 122(11), 949. https://doi.org/10.1007/s00339-016-0465-1.
  33. Ebrahimi, F., Barati, M.R. and Haghi, P. (2016b), "Nonlocal thermo-elastic wave propagation in temperature-dependent embedded small-scaled nonhomogeneous beams", Eur. Phys. J. Plus, 131(11), 383. https://doi.org/10.1140/epjp/i2016-16383-0.
  34. Ebrahimi, F., Dabbagh, A. and Barati, M.R. (2016c), "Wave propagation analysis of a size-dependent magneto-electro-elastic heterogeneous nanoplate", Eur. Phys. J. Plus, 131(12), 1-18. https://doi.org/10.1140/epjp/i2016-16433-7.
  35. Ebrahimi, F., Ghasemi, F. and Salari, E. (2016d), "Investigating thermal effects on vibration behavior of temperature-dependent compositionally graded Euler beams with porosities", Meccanica, 51(1), 223-249. https://doi.org/10.1007/s11012-015-0208-y.
  36. Eltaher, M., Alshorbagy, A.E. and Mahmoud, F. (2013), "Vibration analysis of Euler-Bernoulli nanobeams by using finite element method", Appl. Math. Model., 37(7), 4787-4797. https://doi.org/10.1016/j.apm.2012.10.016.
  37. Farajpour, A., Yazdi, M.H., Rastgoo, A. and Mohammadi, M. (2016), "A higher-order nonlocal strain gradient plate model for buckling of orthotropic nanoplates in thermal environment", Acta Mechanica, 227(7), 1849-1867. https://doi.org/10.1007/s00707-016-1605-6.
  38. Gao, N. and Zhang, Y. (2019), "A low frequency underwater metastructure composed by helix metal and viscoelastic damping rubber", J. Vib. Control, 25(3), 538-548. https://doi.org/10.1177/1077546318788446.
  39. Gao, N., Hou, H. and Wu, J.H. (2018a), "A composite and deformable honeycomb acoustic metamaterial", Int. J. Mod. Phys. B, 32(20), 1850204. https://doi.org/10.1142/S0217979218502041.
  40. Gao, N., Hou, H., Zhang, Y. and Wu, J.H. (2018b), "Sound absorption of a new oblique-section acoustic metamaterial with nested resonator", Mod. Phys. Lett. B, 32(4), 1850040. https://doi.org/10.1142/S0217984918500409.
  41. Ghadiri, M. and Shafiei, N. (2016), "Nonlinear bending vibration of a rotating nanobeam based on nonlocal Eringen's theory using differential quadrature method", Microsyst. Technol., 22(12), 2853-2867. https://doi.org/10.1007/s00542-015-2662-9.
  42. Guo, H., Qian, K., Cai, A., Tang, J. and Liu, J. (2019), "Ordered gold nanoparticle arrays on the tip of silver wrinkled structures for single molecule detection", Sens. Actuators B Chem., 300, 126846. https://doi.org/10.1016/j.snb.2019.126846.
  43. Guo, H., Li, X., Zhu, Q., Zhang, Z., Liu, Y., Li, Z., Wen, H., Li, Y., Tang, J. and Liu, J. (2020), "Imaging nano-defects of metal waveguides using the microwave cavity interference enhancement method", Nanotechnology, 31(45), 455203. https://doi.org/10.1088/1361-6528/abaa74.
  44. Hu, Y., Chen, Q., Feng, S. and Zuo, C. (2020), "Microscopic fringe projection profilometry: A review", Opt. Lasers Eng., 135,106192. https://doi.org/10.1016/j.optlaseng.2020.106192.
  45. Huang, J., Alyousef, R., Meldi, S., Baharom, S., Alabduljabbar, H., Alaskar, A. and Assilzadeh, H. (2020a), "Influence of porosity and cement grade on concrete mechanical properties", Adv. Concrete Constr., Int. J., 10(5), 393-402. http://dx.doi.org/10.12989/acc.2020.10.5.393.
  46. Huang, Z., Zheng, H., Guo, L. and Mo, D. (2020b), "Influence of the position of artificial boundary on computation accuracy of conjugated infinite element for a finite length cylindrical shell", Acoust. Aust., 48(2), 287-294. https://doi.org/10.1007/s40857-020-00175-5.
  47. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 36, 1539-1558. https://doi.org/10.1007/s00366-019-00780-7.
  48. Kheroubi, B., Benzair, A., Tounsi, A. and Semmah, A. (2016), "A new refined nonlocal beam theory accounting for effect of thickness stretching in nanoscale beams", Adv. Nano Res., Int. J., 4(4), 251-264. https://doi.org/10.12989/anr.2016.4.4.251.
  49. Lam, D.C., Yang, F., Chong, A., Wang, J. and Tong, P. (2003), "Experiments and theory in strain gradient elasticity", J. Mech. Phys. Solids, 51(8), 1477-1508. https://doi.org/10.1016/S0022-5096(03)00053-X.
  50. Lee, C., Wei, X., Kysar, J.W. and Hone, J. (2008), "Measurement of the elastic properties and intrinsic strength of monolayer graphene", Science, 321(5887), 385-388. https://doi.org/10.1126/science.1157996.
  51. Li, L. and Hu, Y. (2015), "Buckling analysis of size-dependent nonlinear beams based on a nonlocal strain gradient theory", Int. J. Eng. Sci., 97, 84-94. https://doi.org/10.1016/j.ijengsci.2015.08.013.
  52. Li, L., Tang, H. and Hu, Y. (2018), "The effect of thickness on the mechanics of nanobeams", Int. J. Eng. Sci., 123, 81-91. https://doi.org/10.1016/j.ijengsci.2017.11.021.
  53. Lim, C., Zhang, G. and Reddy, J. (2015), "A higher-order nonlocal elasticity and strain gradient theory and its applications in wave propagation", J. Mech. Phys. Solids, 78, 298-313. https://doi.org/10.1016/j.jmps.2015.02.001.
  54. Liu, C., Huang, X., Wu, Y.Y., Deng, X., Liu, J., Zheng, Z. and Hui, D. (2020a), "Review on the research progress of cement-based and geopolymer materials modified by graphene and graphene oxide", Nanotechnol. Rev., 9(1), 155-169. https://doi.org/10.1515/ntrev-2020-0014.
  55. Liu, C., Wu, X., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Alyousef, R. and Mohamed, A.M. (2020b), "Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns", Steel Compos. Struct., Int. J., 34(5), 743-767. https://doi.org/10.12989/scs.2020.34.5.743.
  56. Liu, H., Liu, X., Zhao, F., Liu, Y., Liu, L., Wang, L., Geng, C. and Huang, P. (2020c), "Preparation of a hydrophilic and antibacterial dual function ultrafiltration membrane with quaternized graphene oxide as a modifier", J. Colloid Interface Sci., 562, 182-192. https://doi.org/10.1016/j.jcis.2019.12.017.
  57. Luo, L., Nguyen, H., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Alyousef, R., Nguyen, V.D. and Dang, H.M. (2020), "Depiction of concrete structures with seismic separation under faraway fault earthquakes", Adv. Concrete Constr., Int. J., 9(1), 71-82. https://doi.org/10.12989/acc.2020.9.1.071.
  58. Malekzadeh, P., Setoodeh, A. and Beni, A.A. (2011), "Small scale effect on the free vibration of orthotropic arbitrary straight-sided quadrilateral nanoplates", Compos. Struct., 93(7), 1631-1639. https://doi.org/10.1016/j.compstruct.2011.01.008.
  59. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2019), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intell. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-017-1306-6.
  60. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A, 53, 121169. https://doi.org/10.1016/j.physa.2019.121169.
  61. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., Int. J., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853.
  62. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785.
  63. Murmu, T. and Pradhan, S. (2009), "Vibration analysis of nano-single-layered graphene sheets embedded in elastic medium based on nonlocal elasticity theory", J. Appl. Phys., 105(6), 064319. https://doi.org/10.1063/1.3091292.
  64. Murmu, T., McCarthy, M. and Adhikari, S. (2013), "In-plane magnetic field affected transverse vibration of embedded single-layer graphene sheets using equivalent nonlocal elasticity approach", Compos. Struct., 96, 57-63. https://doi.org/10.1016/j.compstruct.2012.09.005.
  65. Narendar, S. and Gopalakrishnan, S. (2012), "Temperature effects on wave propagation in nanoplates", Compos. Part B Eng., 43(3), 1275-1281. https://doi.org/10.1016/j.compositesb.2011.11.029.
  66. Natarajan, C.M., Tanner, M.G. and Hadfield, R.H. (2012), "Superconducting nanowire single-photon detectors: physics and applications", Supercond. Sci. Technol., 25(6), 063001. https://doi.org/10.1088/0953-2048/25/6/063001.
  67. Phung-Van, P., Ferreira, A., Nguyen-Xuan, H. and Wahab, M.A. (2017a), "An isogeometric approach for size-dependent geometrically nonlinear transient analysis of functionally graded nanoplates", Compos. Part B Eng., 118, 125-134. https://doi.org/10.1016/j.compositesb.2017.03.012.
  68. Phung-Van, P., Lieu, Q.X., Nguyen-Xuan, H. and Wahab, M.A. (2017b), "Size-dependent isogeometric analysis of functionally graded carbon nanotube-reinforced composite nanoplates", Compos. Struct., 166, 120-135. https://doi.org/10.1016/j.compstruct.2017.01.049.
  69. Phung-Van, P., Thai, C.H., Nguyen-Xuan, H. and Abdel-Wahab, M. (2019a), "An isogeometric approach of static and free vibration analyses for porous FG nanoplates", Eur. J. Mech. A Solids. 78, 103851. https://doi.org/10.1016/j.euromechsol.2019.103851.
  70. Phung-Van, P., Thai, C.H., Nguyen-Xuan, H. and Wahab, M.A. (2019b), "Porosity-dependent nonlinear transient responses of functionally graded nanoplates using isogeometric analysis", Compos. Part B Eng., 164, 215-225. https://doi.org/10.1016/j.compositesb.2018.11.036.
  71. Pradhan, S. and Murmu, T. (2010), "Small scale effect on the buckling analysis of single-layered graphene sheet embedded in an elastic medium based on nonlocal plate theory", Physica E Low Dimens. Syst. Nanostruct., 42(5), 1293-1301. https://doi.org/10.1016/j.physe.2009.10.053.
  72. Pradhan, S. and Kumar, A. (2011), "Vibration analysis of orthotropic graphene sheets using nonlocal elasticity theory and differential quadrature method", Compos. Struct., 93(2), 774-779. https://doi.org/10.1016/j.compstruct.2010.08.004.
  73. Qi, C.C. (2020), "Big data management in the mining industry", Int. J. Miner. Metall. Mater., 27(2), 131-139. https://doi.org/10.1007/s12613-019-1937-z.
  74. Qian, J., Feng, S., Li, Y., Tao, T., Han, J., Chen, Q. and Zuo, C. (2020a), "Single-shot absolute 3D shape measurement with deep-learning-based color fringe projection profilometry", Opt. Lett., 45(7), 1842-1845. https://doi.org/10.1364/OL.388994.
  75. Qian, J., Feng, S., Tao, T., Hu, Y., Li, Y., Chen, Q. and Zuo, C. (2020b), "Deep-learning-enabled geometric constraints and phase unwrapping for single-shot absolute 3D shape measurement", APL Photonics, 5(4), 046105. https://doi.org/10.1063/5.0003217.
  76. Qiu, T., Shi, X., Wang, J., Li, Y., Qu, S., Cheng, Q., Cui, T. and Sui, S. (2019), "Deep learning: A rapid and efficient route to automatic metasurface design", Adv. Sci., 6(12), 1900128. https://doi.org/10.1002/advs.201900128.
  77. Rouhi, S. and Ansari, R. (2012), "Atomistic finite element model for axial buckling and vibration analysis of single-layered graphene sheets", Physica E Low Dimens. Syst. Nanostruct., 44(4), 764-772. https://doi.org/10.1016/j.physe.2011.11.020.
  78. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424. http://dx.doi.org/10.12989/sss.2018.22.4.413.
  79. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. http://dx.doi.org/10.12989/scs.2016.21.3.679.
  80. Safa, M., Sari, P.A., Shariat, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A, 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  81. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., Int. J., 22(3), 335-340. http://dx.doi.org/10.12989/sss.2018.22.3.335.
  82. Seol, J.H., Jo, I., Moore, A.L., Lindsay, L., Aitken, Z.H., Pettes, M.T., Li, X., Yao, Z., Huang, R. and Broido, D. (2010), "Two-dimensional phonon transport in supported graphene", Science, 328(5975), 213-216. https://doi.org/10.1126/science.1184014.
  83. Shariati, A., Ebrahimi, F., Karimiasl, M., Vinyas, M. and Toghroli, A. (2020a), "On transient hygrothermal vibration of embedded viscoelastic flexoelectric/piezoelectric nanobeams under magnetic loading", Adv. Nano Res., Int. J., 8(1), 49-58. https://doi.org/10.12989/anr.2020.8.1.049.
  84. Shariati, A., Hosseini, S.H.S., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2020b), "Effect of residual surface stress on parametrically excited nonlinear dynamics and instability of viscoelastic piezoelectric nanoelectromechanical resonators", Eng. Comput., 2020, 1-16. https://doi.org/10.1007/s00366-019-00916-9.
  85. Shi, M., Narayanasamy, M., Yang, C., Zhao, L., Jiang, J., Angaiah, S. and Yan, C. (2020a), "3D interpenetrating assembly of partially oxidized MXene confined Mn-Fe bimetallic oxide for superior energy storage in ionic liquid", Electrochim. Acta, 334, 135546. https://doi.org/10.1016/j.electacta.2019.135546.
  86. Shi, M., Xiao, P., Lang, J., Yan, C. and Yan, X. (2020b), "Porous g-C3N4 and MXene dual-confined FeOOH quantum dots for superior energy storage in an ionic liquid", Adv. Sci., 7(2), 1901975. https://doi.org/10.1002/advs.201901975.
  87. Song, Q., Zhao, H., Jia, J., Yang, L., Lv, W., Gu, Q. and Shu, X. (2020), "Effects of demineralization on the surface morphology, microcrystalline and thermal transformation characteristics of coal", J. Anal. Appl. Pyrolysis, 145, 104716. https://doi.org/10.1016/j.jaap.2019.104716.
  88. Suhatril, M., Osman, N., Sari, P.A., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in Selangor, Malaysia", Geotech. Geol. Eng., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3.
  89. Tang, H., Li, L. and Hu, Y. (2019), "Coupling effect of thickness and shear deformation on size-dependent bending of micro/nano-scale porous beams", Appl. Math. Model., 66, 527-547. https://doi.org/10.1016/j.apm.2018.09.027.
  90. Thai, C.H., Ferreira, A. and Phung-Van, P. (2019), "Size dependent free vibration analysis of multilayer functionally graded GPLRC microplates based on modified strain gradient theory", Compos. Part B Eng., 169, 174-188. https://doi.org/10.1016/j.compositesb.2019.02.048.
  91. Thai, C.H., Ferreira, A., Tran, T. and Phung-Van, P. (2020), "A size-dependent quasi-3D isogeometric model for functionally graded graphene platelet-reinforced composite microplates based on the modified couple stress theory", Compos. Struct., 234, 111695. https://doi.org/10.1016/j.compstruct.2019.111695.
  92. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639. http://dx.doi.org/10.12989/scs.2014.17.5.623.
  93. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2018), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intell. Manuf., 29(8), 1793-1801. https://doi.org/10.1007/s10845-016-1217-y.
  94. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., Int. J., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.
  95. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.
  96. Wang, Y.Z., Li, F.M. and Kishimoto, K. (2010), "Scale effects on the longitudinal wave propagation in nanoplates", Physica E Low Dimens. Syst. Nanostruct., 42(5), 1356-1360. https://doi.org/10.1016/j.physe.2009.11.036.
  97. Wang, Y., Yao, M., Ma, R., Yuan, Q., Yang, D., Cui, B., Ma, C., Liu, M. and Hu, D. (2020), "Design strategy of barium titanate/polyvinylidene fluoride-based nanocomposite films for high energy storage", J. Mater. Chem. A, 8(3), 884-917. https://doi.org/10.1039/C9TA11527G.
  98. Xiao, W., Li, L. and Wang, M. (2017), "Propagation of in-plane wave in viscoelastic monolayer graphene via nonlocal strain gradient theory", Appl. Phys. A, 123(6), 388. https://doi.org/10.1007/s00339-017-1007-1.
  99. Xu, Q., Zou, Z., Chen, Y., Wang, K., Du, Z., Feng, J., Ding, C., Bai, Z., Zang, Y. and Xiong, Y. (2020), "Performance of a novel-type of heat flue in a coke oven based on high-temperature and low-oxygen diffusion combustion technology", Fuel, 267, 117160. https://doi.org/10.1016/j.fuel.2020.117160.
  100. Yan, H., Xue, X., Chen, W., Wu, X., Dong, J., Liu, Y. and Wang, Z. (2020), "Reversible Na+ insertion/extraction in conductive polypyrrole-decorated NaTi2 (PO4) 3 nanocomposite with outstanding electrochemical property", Appl. Surf. Sci., 530, 147295. https://doi.org/10.1016/j.apsusc.2020.147295.
  101. Zenkour, A.M. (2016), "Nonlocal transient thermal analysis of a single-layered graphene sheet embedded in viscoelastic medium", Physica Low Dimens. Syst. Nanostruct., 79, 87-97. https://doi.org/10.1016/j.physe.2015.12.003.
  102. Zhang, J., Chen, Q., Sun, J., Tian, L. and Zuo, C. (2020a), "On a universal solution to the transport-of-intensity equation", Opt. Lett., 45(13), 3649-3652. https://doi.org/10.1364/OL.391823.
  103. Zhang, J., Sun, J., Chen, Q. and Zuo, C. (2020b), "Resolution analysis in a lens-free on-chip digital holographic microscope", IEEE Trans. Comput. Imaging, 6, 697-710. https://doi.org/10.1109/TCI.2020.2964247.
  104. Zhao, X., Fourie, A. and Qi, C.C. (2019), "An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon", Int. J. Miner. Metall. Mater., 26(10), 1206-1216. https://doi.org/10.1007/s12613-019-1885-7.
  105. Zhao, X., Fourie, A. and Qi, C.C. (2020a), "Mechanics and safety issues in tailing-based backfill: A review", Int. J. Miner. Metall. Mater., 27(9), 1165-1178. https://doi.org/10.1007/s12613-020-2004-5.
  106. Zhao, X., Fourie, A., Veenstra, R. and Qi, C.C. (2020b), "Safety of barricades in cemented paste-backfilled stopes", Int. J. Miner. Metall. Mater., 27(8), 1054-1064. https://doi.org/10.1007/s12613-020-2006-3.
  107. Zhu, X. and Li, L. (2017a), "Closed form solution for a nonlocal strain gradient rod in tension", Int. J. Eng. Sci., 119, 16-28. https://doi.org/10.1016/j.ijengsci.2017.06.019.
  108. Zhu, X. and Li, L. (2017b), "On longitudinal dynamics of nanorods", Int. J. Eng. Sci., 120, 129-145. https://doi.org/10.1016/j.ijengsci.2017.08.003.
  109. Zhu, X. and Li, L. (2017c), "Twisting statics of functionally graded nanotubes using Eringen's nonlocal integral model", Compos. Struct., 178, 87-96. https://doi.org/10.1016/j.compstruct.2017.06.067.
  110. Zhu, J., Wu, P., Chen, M., Kim, M.J., Wang, X. and Fang, T. (2020), "Automatically processing IFC clipping representation for BIM and GIS integration at the process level", Appl. Sci., 10(6), 2009. https://doi.org/10.3390/app10062009.
  111. Zuo, C., Chen, Q., Gu, G., Feng, S., Feng, F., Li, R. and Shen, G. (2013), "High-speed three-dimensional shape measurement for dynamic scenes using bi-frequency tripolar pulse-width-modulation fringe projection", Opt. Lasers Eng., 51(8), 953-960. https://doi.org/10.1016/j.optlaseng.2013.02.012.
  112. Zuo, C., Chen, Q., Tian, L., Waller, L. and Asundi, A. (2015), "Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective", Opt. Lasers Eng., 71, 20-32. https://doi.org/10.1016/j.optlaseng.2015.03.006.
  113. Zuo, C., Sun, J., Li, J., Zhang, J., Asundi, A. and Chen, Q. (2017), "High-resolution transport-of-intensity quantitative phase microscopy with annular illumination", Sci. Rep., 7(1), 1-22. https://doi.org/10.1038/s41598-017-06837-1.
  114. Zuo, C., Li, J., Sun, J., Fan, Y., Zhang, J., Lu, L., Zhang, R., Wang, B., Huang, L. and Chen, Q. (2020a), "Transport of intensity equation: A tutorial", Opt. Lasers Eng., 135, 106187. https://doi.org/10.1016/j.optlaseng.2020.106187.
  115. Zuo, C., Sun, J., Li, J., Asundi, A. and Chen, Q. (2020b), "Wide-field high-resolution 3d microscopy with Fourier ptychographic diffraction tomography", Opt. Lasers Eng., 128, 106003. https://doi.org/10.1016/j.optlaseng.2020.106003.