DOI QR코드

DOI QR Code

Approximate Optimization Based on Meta-model for Weight Minimization Design of Ocean Automatic Salt Collector

해양자동채염기의 최소중량설계를 위한 메타모델 기반 근사최적화

  • Song, Chang Yong (Dept. of Naval Architecture & Ocean Engineering, Mokpo National University)
  • 송창용 (목포대학교 조선해양공학과)
  • Received : 2020.10.14
  • Accepted : 2021.01.20
  • Published : 2021.01.28

Abstract

In this paper, the meta-model based approximate optimization was carried out for the structure design of an ocean automatic salt collector in order to minimize the structure weight. The structural analysis was performed by using the finite element method to evaluate the strength performance of the ocean automatic salt collector in its initial design. In the structural analysis, it was evaluated the strength performance of the design load conditions. The optimum design problem was formulated so that design variables of main structure thickness would be determined by minimizing the structure weight subject to strength performance constraints. The meta-models used in the approximate optimization were the response surface method, Kriging model, and Chebyshev orthogonal polynomials. Regarding to the numerical characteristics, the solution results from approximate optimization techniques were compared to the results of non-approximate optimization. The Chebyshev orthogonal polynomials among the meta-models used in the approximate optimization showed the most appropriate optimum design results for the structure design of the ocean automatic salt collector.

본 논문에서는 해양자동채염기의 구조중량 최소화를 위해 구조설계에 대한 메타모델 기반 근사최적화를 수행하였다. 구조해석은 해양자동채염기의 초기설계에 대한 강도성능을 평가하기 위해 유한요소법을 이용하여 수행하였다. 구조해석에서는 설계하중조건에 대한 강도성능을 평가하였다. 최적설계문제는 강도성능 제한조건을 만족하면서 중량을 최소화할 수 있는 구조두께의 설계변수를 결정하도록 정식화하였다. 근사최적화에는 반응표면법, 크리깅 모델 및 체비쇼프 직교 다항식의 메타모델을 사용하였다. 수치계산 특성을 검토하기 위해 근사최적화 결과는 비근사최적화 결과와 비교하였다. 근사최적화에 사용된 메타모델 중 체비쇼프 직교 다항식이 해양자동채염기의 구조설계에 가장 적합한 최적설계 결과를 나타내었다.

Keywords

References

  1. Korea Maritime Institute. (2019). KMI Trend Analysis - Vol. 161. Seoul.
  2. C. Y. Song, J. Lee & J. Choung. (2011). Reliability-based Design Optimization of an FPSO Riser Support Using Moving Least Squares Response Surface Meta-models. Ocean Engineering, 38(1), 304-318. DOI : 10.1016/j.oceaneng.2010.11.001
  3. J. M. Park, C. H. Park, T. S. Kim & D. H. Choi. (2011). Optimal Determination of Pipe Support Types in Flare System for Minimizing Support Cost, Journal of the Society of Naval Architects of Korea, 48(4), 325-329. DOI : 10.3744/SNAK.2011.48.4.325
  4. Y. J. Ji, J. S. Kwak, H. Y. Lee & S. C. Kim. (2015). Optimal Arrangement of Resilient Mount Installed on Frame Support Structure at Shipboard Equipment Under Shock Load, Journal of the Society of Naval Architects of Korea, 52(4), 298-304. DOI : 10.3744/SNAK.2015.52.4.298
  5. J. H. Park, D. Lee, J. W. Yang & C. Y. Song. (2019). Design Enhancement to Avoid Radar Mast Resonance in Large Ship Using Design of Experiments. Journal of Ocean Engineering and Technology, 33(1), 50-60. DOI : 10.26748/KSOE.2018.088
  6. J. H. Byun & O. Jo. (2020). Machine Learning-based MCS Prediction Models for Link Adaptation in Underwater Networks. Journal of Convergence for Information Technology, 10(5), 1-7. DOI : 10.22156/CS4SMB.2020.10.05.001
  7. G. S. Chae. (2019). A Study of the Nonlinear Characteristics Improvement for a Electronic Scale using Multiple Regression Analysis. Journal of Convergence for Information Technology, 9(6), 1-6. DOI : 10.22156/CS4SMB.2019.9.6.001
  8. C. Y. Song & D. J. Lee. (2020). A Comparative Study on Surrogate Models and Sensitivity Analysis for Structure Design of Automatic Salt Collector Using Orthogonal Array Experiment. Journal of Convergence for Information Technology, 10(7), 138-146. DOI : 10.22156/CS4SMB.2020.10.07.138
  9. Simulia. (2018). Abaqus User Manual. Simulia.
  10. DNV-GL. (2015). Structural Design of Offshore Units WSD Method, DET NORSKE VERITAS, 90.
  11. R. T. Haftka & Z. Gurdal. (1991). Elements of Structural Optimization, Kluwer Academic Publishers, Dordrecht. DOI : 10.1007/978-94-011-2550-5
  12. Simulia. (2018). ISIGHT User Manual. Simulia.
  13. C. Y. Song & J. Lee. (2010) Comparative Study of Approximate Optimization Techniques in CAE-based Structural Design. Transactions of the Korean Society of Mechanical Engineers-A, 34(11), 1603-1611. DOI : 10.3795/KSME-A.2010.34.11.1603
  14. S. K. Cho, H. Byun & T. H. Lee. (2009). Selection Method of Global Model And Correlation Coefficients for Kriging Metamodel. Transactions of the Korean Society of Mechanical Engineers-A, 33(3), 813-818. DOI : 10.3795/KSME-A.2009.33.8.813
  15. S. H. Baek, H. S. Kim & D. S. Han. (2011). Structural Optimization of Variable Swash Plate for Automotive Compressor Using Orthogonal Polynomials. Transactions of the Korean Society of Mechanical Engineers-A, 35(10), 1273-1279. DOI : 10.3795/KSME-A.2011.35.10.1273
  16. S. H. Park. (2012). Design of Experiments, Minyoung Publishing, Seoul.
  17. C. Y. Song & J. Lee. (2011). A Realization of Constraint Feasibility in a Moving Least Squares Response Surface Based Approximate Optimization. Computational Optimization and Applications, 50(1), 163-188. DOI : 10.1007/s10589-009-9312-z