Earthquakes and Structures

  • 제21권5호
  • /
  • Pages.505-514
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Cost and reliability of retrofit alternatives for schools located on seismic zones

  • 투고 : 2021.03.18
  • 심사 : 2021.08.22
  • 발행 : 2021.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

A formulation based on structural reliability and cost effectiveness is proposed to provide recommendations to select the best retrofit strategy for schools with reinforced concrete frames and masonry walls, among three proposed alternatives. The cost calculation includes the retrofit cost and the expected costs of failure consequences. Also, the uncertainty of the seismic hazard is considered for each school site. The formulation identifies the potential failure modes, among shear and bending forces for beams, and flexure-compression forces for columns, for each school, and the seismic damages suffered by the schools after the earthquake of September 17, 2017 are taken into account to calibrate the damaged conditions per school. The school safety level is measured through its global failure probability, instead of only the local failure probability. The proposed retrofit alternatives are appraised in terms of the cost/benefit balance under future earthquakes, for the respective site seismic hazard, as opposed to the current practice of just restoring the structure original resistance. The best retrofit is the one that corresponds to the minimum value of the expected life cycle cost. The study, with further developments, may be used to develop general recommendations to retrofit schools located at seismic zones.

키워드

참고문헌

  1. Ahmad, N. (2021), "Force-based seismic design of steel haunch retrofit for RC frames", Earthq. Struct., 20(2), 133-148. http://dx.doi.org/10.12989/eas.2021.20.2.133.
  2. Al-Osta M.A., Khan, M.I., Bahraq, A.A. and Xu, S.Y. (2020), "Application of ultra-high performance fiber reinforced concrete for retrofitting the damaged exterior reinforced concrete beam-column joints", Earthq. Struct., 19(5), 361-377. https://doi.org/10.12989/eas.2020.19.5.361
  3. Ang, A.H.S. and De Leon, D. (2005), "Modelling and analysis of uncertainties for risk-informed decisions in infrastructures engineering", Struct. Infrastruct. Eng., 1(1), 19-31. https://doi.org/10.1080/15732470412331289350.
  4. Ang, A.H.S. and Tang, W. (2007), Probability Concepts in Engineering: Emphasis on Applications to Civil and Environmental Engineering, John Wiley and Sons.
  5. Ang, A.H.S. and Tang, W. (1984), Probability Concepts in Engineering Planning and Design, John Wiley and Sons.
  6. ASCE (2010), Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10. Reston, American Society of Civil Engineers.
  7. Beigi, H.A., Christopoulos, C., Sullivan, T.J. and Calvi, G. M. (2016), "Cost benefit analysis of buildings retrofitted using GIB systems", Earthq. Spectra, 32(2), https://doi.org/10.1193%2F110914eqs185m. https://doi.org/10.1193%2F110914eqs185m
  8. Croce, P., Landi, F. and Formichi, P. (2019), "Probabilistic seismic assessment of existing masonry buildings", Building., 9(12), 237, https://doi.org/10.3390/buildings9120237.
  9. Cui, W. and Blockley, D.I. (1991), "On the bounds for structural system reliability", Struct. Safety 9(4), 247-259. https://doi.org/10.1016/0167-4730(91)90047-D.
  10. Darbhanzi, A., Marefat, M.S., Khanmohammadi, M., Moradimanesh, A. and Zare, H. (2018), Earthq. Struct., 14(5), 449-458. https://doi.org/10.12989/eas.2018.14.5.449
  11. De Leon, D. and Ismael, E. (2021). "Comparison of retrofit alternatives for a school under seismic hazard including risk and reliability concepts", Civil Eng. Environ. Syst., https://doi.org/10.1080/10286608.2021.1977798
  12. Esteva, L., Diaz-Lopez, O., Garcia-Perez, J., Sierra, G. and Ismael, E. (2002), "Life-cycle optimization in the establishment of performance-acceptance parameters for seismic design", Struct. Safety, 24(2-4), 187-204. https://doi.org/10.1016/S0167-4730(02)00024-3.
  13. Federal Emergency Management Agency (FEMA) (2006), Next-Generation Performance-Based Seismic Design Guidelines, Program Plan for New and Existing Buildings. Developed by the Applied Research Council for the Federal Emergency Management Agency, Report No. FEMA 445. Washington, D.C.
  14. D'Ayala, D. and Vatteri, A.P. (2021), "Classification and seismic fragility assessment of confined masonry school buildings", Bull. Earthq. Eng., 19, 2213-2263 https://doi.org/10.1007/s10518-021-01061-913
  15. Gobierno de la Ciudad de Mexico (2017), Normas Tecnicas Complementarias, Reglamento de Construcciones para la Ciudad de Mexico. Mexico.
  16. Halahla, A.M., Rahman, M.K., Al-Gadhib, A.H. and Al-Osta, M.A. and Baluch, M.H. (2019), "Experimental investigations and FE simulation of exterior BCJs retrofitted with CFRP fabric", Earthq. Struct., 17(4), 337-354. http://dx.doi.org/10.12989/eas.2019.17.4.337
  17. Hwang, S.H., Kim, S. and Yang, K.H. (2020), "In-plane seismic performance of masonry wall retrofitted with prestressed steel-bar truss", Earthq. Struct., 19(6), 459-469. http://dx.doi.org/10.12989/eas.2020.19.6.459.
  18. Institute of Engineering (2017), Ground Motion Parameters of the September 19, 2017 Puebla Morelos Earthquake (Mw 7.1). Preliminar Report. Universidad Nacional Autonoma de Mexico.
  19. Inegi, & SEP. (2014), Censo de escuelas, maestros y alumnos de educacion basica y especial. Resultados del CEMABE 2013.
  20. Instituto Nacional de la Infraestructura Fisica Educativa (INIFED) (2016), Guia para elaborar o actualizar el Programa Escolar de Proteccion Civil. Recuperado de http://www.seducoahuila.gob.mx/proteccioncivilescolar/assets/guia-programa- escolar-de-proteccion-civil.pdf.
  21. Izzuddin, B.A., Karayannis, C.G. and Elnashai, A.S. (1994), "Advanced nonlinear formulation for reinforced concrete beam-columns", Struct. Eng., 120(10), 2913-2934. http://doi.org/10.1061/(asce)07339445(1994)120:10(2913).
  22. Jaimes M. A. and Nino M. (2017) Cost-benefit analysis to assess seismic mitigation options in Mexican public school buildings. Bull Earthquake Eng. 15(9), pp 3919-3942. http://doi.org/10.1007/s10518-017-0119-5.
  23. JCSS (2001), Probabilistic Model Code: Part 1 - Basis of Design, Joint Committee of Structural Safety.
  24. Kalogeropoulos, G.I., Tsonos, A.D.G., Konstantinidis, D. and Iakovidis, P.E. (2019), "Earthquake-resistant rehabilitation of existing RC structures using high-strength steel fiber-reinforced concrete jackets", Earthq. Struct., 17(1), 115-129, http://dx.doi.org/10.12989/eas.2019.17.1.115.
  25. Kalogeropoulos, G.I. and Tsonos A.D.G. (2019), "Improvement of the cyclic response of RC columns with inadequate lap splices-Experimental and analytical investigation", Earthq. Struct., 16(3), 279-293. http://dx.doi.org/10.12989/eas.2019.16.3.279.
  26. Kalogeropoulos, G.I. and Tsonos, A.G. (2014), "Effectiveness of R/C jacketing of substandard R/C columns with short lap splices", Struct. Monit. Maint., 1(3), 273-292. https://doi.org/10.12989/SMM.2014.1.3.273.
  27. Karayannis, C.G., Izzuddin, B.A. and Elnashai, A.S. (1994), "Application of adaptive analysis to Reinforced concrete frames", J. Struct. Eng., 120(10), 2935-2957, http://doi.org/10.1061/(ASCE)0733-9445(1994)120:10(2935)
  28. Karayannis, C.G. and Golias, E. (2018), "Full scale tests of RC joints with minor to moderate seismic damage repaired using CFRP sheets", Earthq. Struct., 15(6), 617-627. https://doi.org/10.12989/EAS.2018.15.6.617
  29. Karayannis, C.G. and Golias, E. (2021), "Strengthening of deficient RC joints with diagonally placed external C-FRP ropes", Earthq. Struct., 20(1), 123-132. http://dx.doi.org/10.12989/eas.2021.20.1.123
  30. Maio, A., Estevao, J.M.C., Ferreira, T.M. and Vicente, R. (2020), "Cost-benefit analysis of traditional seismic retrofitting strategies integrated in the renovation of stone masonry buildings", Eng. Struct., 206, http://doi.org/10.1016/j.engstruct.2019.110050.
  31. Ahmad, N. and Ali, Q. (2017), "Displacement-based seismic assessment of masonry buildings for global and local failure mechanisms", Cogent Eng., 4(1), 1414576. http://doi.org/10.1080/23311916.2017.1414576.
  32. Niasar, A.N., Alaee, F.J. and Zamani, S.M. (2020), "Parametric study on the lateral strength of URM wall, retrofitted using ECC mortar", Earthq. Struct., 18(4), 451-466. http://dx.doi.org/10.12989/eas.2020.18.4.451.
  33. O'Reilly, G.J., Perrone, D., Fox, M., Monteiro, R. and Filiatrault, A. (2018), "Seismic assessment and loss estimation of existing school buildings in Italy", Eng. Struct., 168. 142-162. http://doi.org/10.1016/j.engstruct.2018.04.056
  34. Rosenblueth, E. (1986), "Optimum reliabilities and optimum design", Struct. Safety. 3(2), 69-83. https://doi.org/10.1016/0167-4730(86)90009-3.
  35. Rosenblueth, E. (1987), "What should we do with structural reliabilities? Reliability and risk analysis in civil engineering", Procs. of ICASP 5, Vancouver, 24-34.
  36. Sardari, F., Dehkordi, M.R., Eghbali, M. and Samadian, D. (2020), "Practical seismic retrofit strategy based on reliability and resiliency analysis for typical existing steel school buildings in Iran", Int. J. Disaster Risk Reduct., 51, https://doi.org/10.1016/j.ijdrr.2020.101890
  37. Seaman, J., Leivesley, S. and Hogg, C. (1984), "Epidemiologia de Desastres Naturales, Edit. Harla, Organizacion Panamericana de la Salud, 161.
  38. Sorensen, J.D. and Thoft-Christensen P. (1987)," Integrated reliability-based optimal design of structures. Reliability and optimization of structural systems", Procs. 1st. IFIP WG 7.5 Working Conference, Denmark.
  39. Srechai, J., Leelataviwat, S., Wongkaew, A. and Lukkunaprasit, P. (2017), "Experimental and analytical evaluation of a low-cost seismic retrofitting method for masonry-infilled non-ductile RC frames", Earthq. Struct., 12(6), pp. 699-712. http://dx.doi.org/10.12989/eas.2017.12.6.699.
  40. Straub, D. and Faber, M.H. (2005), "Risk based inspection planning for structural systems", Struct. Safety, 27(4), 335-355. https://doi.org/10.1016/j.strusafe.2005.04.001.
  41. Thoft-Christensen, P. (1988), "Application of optimization methods in structural systems reliability theory", Lecture Notes in Control and Information Sciences, Springer, Berlin, Heidelberg.
  42. Tena, A. (2007), Analisis de estructuras con metodos matriciales. Limusa, Mexico.
  43. Tsonos, A.G. (2014), "An innovative solution for strengthening of old R/C structures and for improving the FRP strengthening method", Struct. Monit. Maint., 1(3), 323-338. https://doi.org/10.12989/SMM.2014.1.3.323.
  44. Tsonos, A.D.G., Kalogeropoulos, G., Iakovidis, P. and Konstantinidis, D. (2017), "Seismic retrofitting of pre-1970 RC bridge columns using innovative jackets", J. Struct. Eng., 8(2), 133-147. https://doi.org/10.1504/IJSTRUCTE.2017.084631.
  45. Ventura, C.E., Bebamzadeh, A., Fairhurst, M., Taylor, G. Finn, W.D.L. (2015), "Performance-based retrofit of school buildings in British Columbia, Canada: An update", Second ATC & SEI Conference on Improving the Seismic Performance of Existing Buildings and Other Structures. 741-753. https://doi.org/10.1061/9780784479728.061.
  46. Yang, M. and Zhang, C. (2019), "Comparative study on retrofitting strategies for residential buildings after earthquakes", Earthq. Struct., 16(4), 375-389. https://doi.org/10.12989/eas.2019.16.4.375.
  47. Wen, Y.K. (1976), "Method for random vibration of hysteretic systems," J. Eng. Mech. Div., ASCE, 102, 150-154.