Structural Engineering and Mechanics

  • 제80권5호
  • /
  • Pages.523-538
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

DEM numerical study on mechanical behaviour of coal with different water distribution models

  • Tan, Lihai (School of Resource Environment and Safety Engineering, University of South China) ;
  • Cai, Xin (School of Resources and Safety Engineering, Central South University) ;
  • Ren, Ting (School of Civil, Mining and Environmental Engineering, University of Wollongong) ;
  • Yang, Xiaohan (School of Civil, Mining and Environmental Engineering, University of Wollongong) ;
  • Rui, Yichao (School of Resources and Safety Engineering, Central South University)
  • 투고 : 2021.05.31
  • 심사 : 2021.09.24
  • 발행 : 2021.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

The mechanical behaviour and stability of coal mining engineering underground is significantly affected by ground water. In this study, nuclear magnetic resonance imaging (NMRI) technique was employed to determine the water distribution characteristics in coal specimens during saturation process, based on which the functional rule for water distribution was proposed. Then, using discrete element method (DEM), an innovative numerical modelling method was developed to simulate water-weakening effect on coal behaviour considering moisture content and water distribution. Three water distribution numerical models, namely surface-wetting model, core-wetting model and uniform-wetting model, were established to explore the water distribution influences. The feasibility and validity of the surface-wetting model were further demonstrated by comparing the simulation results with laboratory results. The investigation reveals that coal mechanical properties are affected by both water saturation coefficient and water distribution condition. For all water distribution models, micro-cracks always initiate and nucleate in the water-rich area and thus lead to distinct macro fracture characteristics. With the increase of water saturation coefficient, the failure of coal tends to be less violent with less cracks and ejected fragments. In addition, the core-wetting specimen is more sensitive to water than specimens with other water distribution models.

키워드

과제정보

The authors acknowledge the support of the Graduated Students' Research, National Natural Science Foundation of China (51934007, 51874292, 51804303) and Innovation Fund Project of Central South University (2018zzts210). The authors also would like to extend their appreciation to Dr. Chee on for grammar correction.

참고문헌

  1. Cai, X., Zhou, Z. and Du, X. (2020a), "Water-induced variations in dynamic behavior and failure characteristics of sandstone subjected to simulated geo-stress", Int. J. Rock Mech. Min. Sci., 130, 104339. https://doi.org/10.1016/j.ijrmms.2020.104339.
  2. Cai, X., Zhou, Z., Tan, L., Zang, H. and Song, Z. (2020b), "Water saturation effects on thermal infrared radiation features of rock materials during deformation and fracturing", Rock Mech. Rock Eng., 53(11), 4839-4856. https://doi.org/10.1007/s00603-020-02185-1.
  3. Cai, X., Zhou, Z., Zang, H. and Song, Z. (2020c), "Water saturation effects on dynamic behavior and microstructure damage of sandstone: Phenomena and mechanisms", Eng. Geol., 276, 105760. https://doi.org/10.1016/j.enggeo.2020.105760.
  4. Cao, R., Cao, P., Fan, X., Xiong, X. and Lin, H. (2016), "An experimental and numerical study on mechanical behavior of ubiquitous-joint brittle rock-like specimens under uniaxial compression", Rock Mech. Rock Eng., 49(11), 4319-4338. https://doi.org/10.1007/s00603-016-1029-6.
  5. Chen, G., Li, T., Wang, W., Zhu, Z., Chen, Z. and Tang, O. (2019), "Weakening effects of the presence of water on the brittleness of hard sandstone", Bull. Eng. Geol. Environ., 78(3), 1471-1483. https://doi.org/10.1007/s10064-017-1184-3.
  6. Dang, W., Wu, W., Konietzky, H. and Qian, J. (2019), "Effect of shear-induced aperture evolution on fluid flow in rock fractures", Comput. Geotech., 114, 103152. https://doi.org/10.1016/j.compgeo.2019.103152.
  7. Erguler, Z. and Ulusay, R. (2009), "Water-induced variations in mechanical properties of clay-bearing rocks", Int. J. Rock Mech. Min. Sci., 46(2), 355-370. https://doi.org/10.1016/j.ijrmms.2008.07.002.
  8. Franklin, J.A. (1979), "Suggested methods for determining water-content, porosity, density, absorption and related properties and swelling and slake-durability index properties", Int. J. Rock Mech. Min. Sci., 16(2), 143-151. https://doi.org/10.1016/0148-9062(79)91452-9.
  9. Hawkins, A. and McConnell, B. (1992), "Sensitivity of sandstone strength and deformability to changes in moisture content", Quart. J. Eng. Geol. Hydrogeol., 25(2), 115-130. https://doi.org/10.1144/gsl.qjeg.1992.025.02.05.
  10. Huang, Y., Yang, S., Ranjith, P. and Zhao, J. (2017), "Strength failure behavior and crack evolution mechanism of granite containing pre-existing non-coplanar holes: Experimental study and particle flow modeling", Comput. Geotech., 88, 182-198. https://doi.org/10.1016/j.compgeo.2017.03.015.
  11. Jiang, T., Shen, Z., Yang, M., Xu, L., Gan, L. and Cui, X. (2018), "A new model approach to predict the unloading rock slope displacement behavior based on monitoring data", Struct. Eng. Mech., 67(2), 105-113. https://doi.org/10.1016/j.enggeo.2018.05.015.
  12. Kou, M., Han, D., Xiao, C. and Wang, Y. (2019), "Dynamic fracture instability in brittle materials: Insights from DEM simulations", Struct. Eng. Mech., 71(1), 65-75. https://doi.org/10.12989/sem.2019.71.1.065.
  13. Li, X., Li, H. and Zhang, G. (2019), "Damage assessment and blast vibrations controlling considering rock properties of underwater blasting", Int. J. Rock Mech. Min. Sci., 121, 104045. https://doi.org/10.1016/j.ijrmms.2019.06.004.
  14. Li, Z. and Reddish, D. (2004), "The effect of groundwater recharge on broken rocks", Int. J. Rock Mech. Min. Sci., 3(41), 409. https://doi.org/10.1016/j.ijrmms.2004.03.054.
  15. Liu, W., Zhou, Y., Zhu, X., Meng, X., Liu, M. and Wahab, M.A. (2019), "Numerical modelling of bottom-hole rock in underbalanced drilling using thermo-poroelastoplasticity model", Struct. Eng. Mech., 69(5), 537-545. https://doi.org/10.12989/sem.2019.69.5.537.
  16. Multon, S., Seignol, J. and Toutlemonde, F. (2006), "Concrete beams submitted to various moisture environments", Struct. Eng. Mech., 22(1), 71-84. https://doi.org/10.12989/sem.2006.22.1.071.
  17. Ojo, O. and Brook, N. (1990), "The effect of moisture on some mechanical properties of rock", Min. Sci. Technol., 10(2), 145-156. https://doi.org/10.1016/0167-9031(90)90158-o.
  18. Romana, M. and Vasarhelyi, B. (2007). "A discussion on the decrease of unconfined compressive strength between saturated and dry rock samples", Proceedings of 11th Congress of the International Society for Rock Mechanics, Lisbon, Portugal, July.
  19. Shakoor, A. and Barefield, E.H. (2009), "Relationship between unconfined compressive strength and degree of saturation for selected sandstones", Environ. Eng. Geosci., 15(1), 29-40. https://doi.org/10.2113/gseegeosci.15.1.29.
  20. Song, Z., Konietzky, H. and Herbst, M. (2019), "Bonded-particle model-based simulation of artificial rock subjected to cyclic loading", Acta Geotechnica, 14(4), 955-971. https://doi.org/10.1007/s11440-018-0723-9.
  21. Tan, L., Ren, T., Dou, L., Yang, X., Cai, X. and Qiao, M. (2021a), "Analytical stress solution for rock mass containing two holes based on an improved Schwarz alternating method", Theor. Appl. Fract. Mech., 116, 103092. https://doi.org/10.1016/j.tafmec.2021.103092.
  22. Tan, L., Ren, T., Dou, L., Yang, X., Qiao, M. and Peng, H. (2021b), "Analytical stress solution and mechanical properties for rock mass containing a hole with complex shape", Theor. Appl. Fract. Mech., 114, 103002. https://doi.org/10.1016/j.tafmec.2021.103002.
  23. Tan, L., Ren, T., Yang, X. and He, X. (2018), "A numerical simulation study on mechanical behaviour of coal with bedding planes under coupled static and dynamic load", Int. J. Min. Sci. Technol., 28(5), 791-797. https://doi.org/10.1016/j.ijmst.2018.08.009.
  24. Tang, S. (2018), "The effects of water on the strength of black sandstone in a brittle regime", Eng. Geol., 239, 167-178. https://doi.org/10.1016/j.enggeo.2018.03.025.
  25. Tian, Z., Liu, J., Wang, X., Liu, L., Lv, X. and Zhang, X. (2019), "Deformation and failure mechanism exploration of surrounding rock in huge underground cavern", Struct. Eng. Mech., 72(2), 135-151. https://doi.org/10.12989/sem.2019.72.2.275.
  26. Torok, A . and Vasarhelyi, B. (2010), "The influence of fabric and water content on selected rock mechanical parameters of travertine, examples from Hungary", Eng. Geol., 115(3-4), 237-245. https://doi.org/10.1016/j.enggeo.2010.01.005.
  27. Vasarhelyi, B. and Van, P. (2006), "Influence of water content on the strength of rock", Eng. Geol., 84(1-2), 70-74. https://doi.org/10.1016/j.enggeo.2005.11.011.
  28. Vishal, V., Ranjith, P. and Singh, T.N. (2015), "An experimental investigation on behaviour of coal under fluid saturation, using acoustic emission", J. Nat. Gas Sci. Eng., 22, 428-436. https://doi.org/10.1016/j.jngse.2014.12.020.
  29. Wang, L., Xu, J., Wang, J. and Karihaloo, B.L. (2019a), "A mechanism-based spatiotemporal non-local constitutive formulation for elastodynamics of composites", Mech. Mater., 128, 105-116. https://doi.org/10.1016/j.mechmat.2018.07.013.
  30. Wang, S., Hagan, P., Li, Y., Zhang, C., Liu, X. and Zou, Z. (2017), "Experimental study on deformation and strength characteristics of sandstone with different water contents", J. Eng. Sci. Technol. Rev., 10(4), 199-203. https://doi.org/10.25103/jestr.104.24.
  31. Wang, Y., Zhou, X. and Kou, M. (2019b), "An improved coupled thermo-mechanic bond-based peridynamic model for cracking behaviors in brittle solids subjected to thermal shocks", Eur. J. Mech.-A/Solid., 73, 282-305. https://doi.org/10.1016/j.euromechsol.2018.09.007.
  32. White, J.M. and Mazurkiewicz, M. (1989), "Effect of moisture content on mechanical properties of Nemo coal, Moberly, Missouri USA", Min. Sci. Technol., 9(2), 181-185. https://doi.org/10.1016/s0167-9031(89)90272-7.
  33. Winkler, E. (2013), Stone in Architecture: Properties, Durability, Springer Science & Business Media.
  34. Yao, Q., Chen, T., Ju, M., Liang, S., Liu, Y. and Li, X. (2016), "Effects of water intrusion on mechanical properties of and crack propagation in coal", Rock Mech. Rock Eng., 49(12), 4699-4709. https://doi.org/10.1007/s00603-016-1079-9.
  35. Zhang, L., Ren, T., Li, X. and Tan, L. (2021), "Acoustic emission, damage and cracking evolution of intact coal under compressive loads: Experimental and discrete element modelling", Eng. Fract. Mech., 252, 107690. https://doi.org/10.1016/j.engfracmech.2021.107690.
  36. Zhang, M., Dou, L., Konietzky, H., Song, Z. and Huang, S. (2019a), "Cyclic fatigue characteristics of strong burst-prone coal: experimental insights from energy dissipation, hysteresis and micro-seismicity", Int. J. Fatig., 133, 105429. https://doi.org/10.1016/j.ijfatigue.2019.105429.
  37. Zhang, X., Ranjith, P., Ranathunga, A. and Li, D. (2019b), "Variation of mechanical properties of bituminous coal under CO2 and H2O saturation", J. Nat. Gas Sci. Eng., 61, 158-168. https://doi.org/10.1016/j.jngse.2018.11.010.
  38. Zhou, Z., Cai, X., Cao, W., Li, X. and Xiong, C. (2016a), "Influence of water content on mechanical properties of rock in both saturation and drying processes", Rock Mech. Rock Eng., 49(8), 3009-3025. https://doi.org/10.1007/s00603-016-0987-z.
  39. Zhou, Z., Cai, X., Ma, D., Cao, W., Chen, L. and Zhou, J. (2018a), "Effects of water content on fracture and mechanical behavior of sandstone with a low clay mineral content", Eng. Fract. Mech., 193, 47-65. https://doi.org/10.1016/j.engfracmech.2018.02.028.
  40. Zhou, Z., Cai, X., Ma, D., Chen, L., Wang, S. and Tan, L. (2018b), "Dynamic tensile properties of sandstone subjected to wetting and drying cycles", Constr. Build. Mater., 182, 215-232. https://doi.org/10.1016/j.conbuildmat.2018.06.056.
  41. Zhou, Z., Tan, L., Cao, W., Zhou, Z. and Cai, X. (2017), "Fracture evolution and failure behaviour of marble specimens containing rectangular cavities under uniaxial loading", Eng. Fract. Mech., 184, 183-201. https://doi.org/10.1016/j.engfracmech.2017.08.029.
  42. Zhou, Z., Xin, C., Yuan, Z., Lu, C., Xiong, C. and Li, X. (2016b), "Strength characteristics of dry and saturated rock at different strain rates", Tran. Nonferr. Metal. Soc. China, 26(7), 1919-1925. https://doi.org/10.1016/s1003-6326(16)64314-5.
  43. Zou, L., Hakansson, U. and Cvetkovic, V. (2018), "Two-phase cement grout propagation in homogeneous water-saturated rock fractures", Int. J. Rock Mech. Min. Sci., 106, 243-249. https://doi.org/10.1016/j.ijrmms.2018.04.017.